Key Features - 10/100/1000Base-TX UTP to 1000Base-FX fiber media convertion.
- IEEE802.3af PoE PSE compatible.
- 9K bytes packet at cut-through mode
- Built-in AC/DC power supply.
- Over-current protection.
- choice of SC, BiDi or other connectors for multimode and singlemode.
- DIP switch to set different configurations.
- LFP (Link Fault Pass-through) support
FR220 series is a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Technical Specifications: Data Rates: - 10/100/1000Mbps (IEEE802.3U IEEE802.3z 1000Base-Tx) - 1000Mbps (1000Base-FX) or 100Mbps (100Base-FX) Input Power Requirements: - Input voltage ........................... 100 VAC to 240 VAC - Input frequency ................................. 47 Hz to 63 Hz Power over Ethernet Output: - Pin Assignment and Polarity……1/2 (V+),3/6 (V-) or/and 4/5(V+),7/8 (V-) - Output Power…..please refer to ordering information - Efficiency ....................................................75% min - Short circuit protection........................ auto recovery - Over current protection ....................... auto recovery nvironmental Conditions: - Operating temperature ....................... 0℃ to 50℃ - Cooling ........................................ free air convection - Storage temperature ...................... -20℃ to +85℃ - Operating Humidity …… 90% max, non-condensing Mechanical Specifications: - Case Material……………Iron - Case Color………………………………….Black - Net Weight…………………….550g approx. / unit - Dimensions………110(W) x 40(H) x 140(L) (mm) Do not include transceiver length Connectors: - AC Inlet…………IEC-J-4 - LAN………………Shielded RJ-45 - Fiber………………see ordering information Ordering Information: Part Number | Supported Standard | Output Voltage | Output Current | Output Power | Remark | FR220S-XX-XXX | IEEE 802.3af | 48V | 0.35A max | 15.4W max | default | FR220-XX-XXX | IEEE 802.3af | 48V | 0.54A max | 25W max | default | FR 220A -XX-XXX | IEEE 802.3af | 56V | 0.54A max | 30W max | optional | FR220B-XX-XXX | Non-standard | 48V | 0.60A max | 30W max | optional | FR 220C -XX-XXX | Non-standard | 24V | 1.20A max | 30W max | optional |
*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below or contact us. Suffix | Description | Suffix | Description | SC-M005 | SC, Multi-Mode, 550m , 850nm | BS3-S10 | BiDi SC , Single-Mode, 10km , 1310/1550nm | SC-S10 | SC, Single-Mode, 10km , 1310nm | BS3-S20 | BiDi SC , Single-Mode, 20km , 1310/1550nm | SC-S20 | SC, Single-Mode, 20km , 1310nm | BS3-S40 | BiDi SC , Single-Mode, 40km , 1310/1550nm | SC-S40 | SC, Single-Mode, 40km , 1310nm | BS5-S10 | BiDi SC , Single-Mode, 10km , 1550/1310nm | SC-S60 | SC, Single-Mode, 60km , 1550nm | BS5-S20 | BiDi SC , Single-Mode, 20km , 1550/1310nm | | | BS5-S40 | BiDi SC , Single-Mode, 40km , 1550/1310nm |
|