Type introduction and application型号介绍及用途
MPF are constructed with metallized Polypropylene film dielectric, copper clad steel wire and powder epoxy coating.
MPF系列电容采用金属化聚丙烯膜卷绕，镀锡铜导线及粉体环氧树脂封装构成。
They are suitable for blocking,coupling , decoupling,filtering, by pass,timing,temperature control and idea for use in telecommunication equipments, data processing equipments, industrial instruments,automatic control systems and other general electronic equipments，Etc.
用途：隔直流，耦合，去耦，滤波，旁路，计时，温控，是用于通信设备，数据处理设备，工业设备，自动控制系统以及其他大型电子设备的理想元件。
Features特性:
●Metallized Polypropylene non-inductive structure MPP无感结构
●High reliability due to self-healing effect.自愈性好，寿命长
●Low loss at high frequence高频损耗小
●Flame retardent epoxy powder coating .阻燃环氧树脂粉末涂装。
Electrical specifications -电气特性
Unless otherwise specified, electrical characteristics refers to IEC 60384-16
如无其他说明，电气特性请参考IEC60384-16
Item项目 | Specification详述 |
Operating Temperature工作温度 | -40℃~+105℃ |
Capacitance Range 容量范围 | 0.0047µF~4.7µF |
Capacitance Tolerance容量偏差 | ±5%(J), ±10%(K) |
Rated Voltage额定电压 | 100VDC(2A),250VDC(2E), 400VDC(2G),630VDC(2J) |
Dissipation Factor散逸因素 | ≦0.1% (1KHz at 20~25℃) |
Insulation Resistance绝缘电阻 | ≧30000MΩ for C≦0.33µF;≧10000MΩ.µF for C>0.33µF |
Withstand Voltage between terminals 端子间耐压 | Add DC test voltage of 175% R.V for 1-5s , no breakdown or flashover (Voltage raising time 5~10sec,cut off current 10mA, ARC=OFF) -施加175% R.Vdc 1~5秒,无永久性击穿和飞弧为合格(升压时间5~10秒, 漏电流10mA,ARC关闭)。 |
