本产品是公司最新的科研成果之一，主要采用高纯度芳烃混合物为基础油，以最新的MAX-TOP®的导热油专用配方加入多种专用复合添加剂制造而成。
This product is one of the latest research results of the Company. It mainly uses the high purity
aromatic hydrocarbon mixture as the base oil and is made with the latest MAXTOP ®heat
transfer oil added with a variety of special composite additives.
该型导热油分子结构稳定，在闭式系统工作极高的稳定性，年结焦率小于0.1%，年酸值增加量小于0.05mgKOH/g，凝点低，使用温度范围宽泛，对系统无腐蚀，使用寿命长，性价比高，完全可以替代矿物导热油，对长期处于300℃以上工况条件予以重点推荐，极限温度可达330℃。
This type of heat transfer oil has stable molecular structure and very high stability in a closed system.
Its annual coking rate is less than 0.1% and annual increase of acid value less than 0.05mgKOH/g.
It has low condensation point and a wide range of use temperature. It causes no corrosion to system
and has long service life and cost performance. It can completely replace mineral heat transfer oil
and is mainly recommended to be used in the working conditions with the temperature more than 300℃.
The extreme temperatures can be up to 330 ℃.
典型数据
Typical Data
外观 淡黄色透明液体
Appearance Light yellow transparent liquid
主要成分 合成芳烃油
Main component Modified alkane oil
闪点 170℃
Flash point 170℃
自燃点 410℃
Spontaneous Ignition Point 410℃
倾点 -30℃
Pour point -30℃
酸值 0.02 mgKOH/g
Acid value 0.02 mgKOH/g
残炭 0.02 %
Carbon residue 0.02 %
水份 181 ppm
Moisture 181 ppm
硫含量 0.001 %
Sulfur content 0.001 %
氯含量 5 mg/kg
Chlorine content 5 mg/kg
使用状态 液相
Use Status Liquid
最低使用温度 -10℃
Minimum use temperature -10℃
最高使用温度 320℃
Maximum use temperature 320℃
油心温度 320℃
Oil center temperature 320℃
油膜温度 350℃
Oil film temperature 350℃
热稳定性试验 通过
heat stability test Passed 本公司主要提供导热油相关服务,高温导热油 HTF & HTO以及MTFD 320合成芳烃导热油也是公司主要的业务执业，有需要的请与我们联系...
028-85750236 13808019629(胡先生) 13808092661(周经理) 公司网址
