|
送纸部（PAPER FEED UNIT）
◆ 采用真空吸附辅助后踢式送纸系统，可视不同纸板尺寸，调整吸力，将纸板吸附
◆ 在送纸台上，使纸板平整顺利送入印刷部。
◆ 侧档位置电动调整，调整快捷、准确、方便。
◆ 送纸上辊包裹耐磨橡胶，并做平衡校正，下送纸辊压花镀硬铬。
◆ 设有生产数量设定装置，无需人工计数。
◆ 隔张送纸装置（可根据选择连续或隔张送纸）方便大型号纸板印刷。
◆ 普通纸箱使用自动归零装置时，试印两张即可调整至正确位置，减少纸板浪费。
◆ 有毛刷除尘，可清除纸板面上的杂质，提高印刷品质。
◆ 控制面版的功能简明而集中，操作方便。
◆ Applies vacuum absorption auxiliary back-kicd paper feeding system;the absorption force is adjustable to
different cardboard thickness and absorbs the cardboard onto the feeding table, then enters into the printing
section smoothly.
◆ The positions of side blocking plate,is electrically adjustable; prompt,accurate and easy.
◆ The uppe paper-feeding roller is wrapped with wearable rubber and subject to balance alignment;the lower
paper-feeding roller is empaistic and chromeplated.
◆ Production number setting device is fitted.needs no manual,accounting.
◆ Has interval paper feeding device(continuous or interval manner is optional),convenient for large-sized
cardboard printing.
◆ When auto 0 position return device is used for ordinary cartons,the position can be correctly adjusted by means
of trial printing two pieces of cartons,thus reduces the waste of cartons.
◆ Has brush,can remove the impurities on the cardboard to improve printing quality.
◆ The functions on the control panel are clear and centralized,easy for operation.
印刷部（PRINTING UNIT）
◆ 采用挂版印刷系统，换版操作方便，并设有脚踏开关，方便挂版。
◆ 网纹辊配合送纸系统气压式自动升降装置。（送纸时网纹辊下降与印版接触，停止送纸时网纹辊上升与印版分离）。
◆ 印刷滚筒周向调整机构采用行星式齿轮构造。齿轮经多次热处理后精磨齿，齿面硬度达HRC58~60°。
◆ 印刷相位采用变频器、触摸屏控制及电动数字式360°调整(运转、停止状态下均可调整)。
◆ 着墨辊采用高精度硬铬耐磨网纹辊。
◆ 橡胶辊采用钢管表面包裹耐磨橡胶，经中高特殊研磨，传墨效果好。
◆ 横向位移，左右调整距离共10mm。
◆ Applies hanging plate printing system,easy for plate changing;and has pedal switch, easy for plate hanging.
◆ Has anilo roller plus paper feeding system auto lifting device(ln feeding anilox roller drops and contacts
printing plate,whereas in stop,it rises to separate from the printing plate).
◆ The circumferential adjustment mechanism of the printing plate applies planetary gear structure.
◆ The printing phase can be subject to a 360-degree adjustment by means of a transducer a touch screen control
or in an electric numeral way(in both running and stop statuses).
◆ The inking roller uses wearable high-precision rigid chrome anilox roller.
◆ The rubber roller is formed by means of wrapping a steel pipe with wearable rubber and has good ink transfer
effect.
◆ The transverse position can be adjusted,with total distance adjustable from right to left being 10mm.
模切部（DIE CUTTER UNIT）
◆ 模切相位，电脑及电动数显调控。
◆ 模切压力间隙电动数显调整。
◆ 胶垫辊自动位移机构，延长胶垫使用寿命。
◆ 进口快换式胶垫、调换方便、耐磨损。
◆ 精密型“设控式”速差补偿系统，确保模切精度。
◆ 胶垫研磨修正机构，增加胶垫使用率，降低消耗。
◆ Circumferential position is adjusted by both computer and motorized with digital display.
◆ Die cutting pressure gap is motorized adjusted with digital display.
◆ Auto displacement control device to adjust anvil roll,it can prolong usage time of anvil roll.
◆ Replaceable rubber anvil with good wear-ability,it is easy to replace operation.
◆ Speed difference compensation system ensure die cutting precision.
◆ Anvil roll repair device to convenient prolong usage time of anvil roll and reduce Consumption.
开槽部（SLOTTING UNIT）
◆ 压线轮、送纸轮、开槽刀座轴向移动采用滚动直线导轨导向，移动平稳，定位准确。（高档机）。
◆ 开槽相位采用变频器、触摸屏控制及电动数字360°调整（运转、停止状态下均可调整），并有复位功能；并可存储订单。
◆ 控制面板装有触摸屏，可控制送纸部、印刷部、开槽部，操作方便。
◆ 中刀移动，可生产大型两片式纸箱（特殊订货）。
◆ 刀轴、送纸轮轴均经镀硬铬精磨，寿命长。
◆ 视用户需要可配打孔装置。
◆ The scoring roller,the feeding roller and the slotter seat move axially,guided bya rolling straight guiding
track so that movement is stable and positioning is accurate.
◆ The slot phase applies transducer and touch screen control,can be electrically regulated within 360-degree
in numeral(both in running and stop),has restoration function;
◆ A touch screen is set on the control panel that can control the feeding section,printing section and sloting
section,easy to operate.
◆ Has central knife moving,being able to produce large-sized 2-piece cartons.
◆ The slotter shaft and the feeding roller shaft are hard-chrome plated and finely polished,enjoying long
lifespan.
◆ Punching device is optional according to users' necessity.
收纸部（STACKING UNIT）
◆ 接纸臂可手动或自动操作，设有保险机构，防止接纸臂突然下落，保证操作人员安全。
◆ 床台升降强力链条带动。
◆ 堆叠高度为1600mm、1800mm、2000mm。
◆ 床台随纸板堆高自动调整倾斜高度，升降电机，附刹车功能，床台得以保持固定位置，不会下滑。
◆ 气压式抬纸机构，在纸板堆叠到预定高度时，接纸托板自动打开，支座托住纸板。
◆ 平面皱纹皮带，防止纸板下滑。
◆ Installed with safeguard mechanism the paper-receiving arm can be operated by hand or automatically in order
to prevent the sudden falling down of the paper-receiving arm for the safety of the operating personnel.
◆ The rising and descending of the machine tool platform is driven by the powerful chain.
◆ The high of heap up is 1600mm、1800mm、2000mm.
◆ With the paperboard's piling to the higher level the MACHINE tool platform automatically adjusts the tilting
hight,Lifting and descending the electrical machinery.Equipped with the brake function,so the MACHINE tool can
keep the fixed position to prevent falling down.
◆ The organization of lift the papery pneumatic motion.The paper receiving tray will automatically open and
catch thepaperboard while the paperboards are piled to the planned height.
◆ The surface corrugated belt can prevent the sliding of the paperboard.
|
