本产品获得ISO9001-2001国际认证
LF-TS6脱水防锈油
一、作用广泛
本公司生产的LF-TS6脱水防锈油主要应用于各种行业的钢铁件表面防锈防腐蚀处理。例如：轴承，液压件，液压管道，冲压件，五金，钣金，紧固件，等重要机械零部件。
二、特性
本脱水防锈油拥有很好的脱水性能，表面有一层致密的保护膜，能提高被封闭钢铁零件的耐腐蚀强度。
三、主要参数
颜色：棕红色 形态：油性液态 酸碱度：7.02±0.0005
比重值：0.876±0.001 粘性度（38度时）：4.01~7.35 mm2/s
四、储藏和包装
20公斤/桶，采用塑料桶装。本脱水防锈油储存的温度2~38°C，严禁高温、暴晒，可以长期储存而不变质。
客户须知：
机械零部件的浸油处理，使得整个表面保持一种油层，大大地提高了零件的抗
腐蚀性能。
一般情况下是不浸油的三倍甚至更高。
假设不浸油的锌锰系磷化防锈性能是18个月，而浸油后的零件可以防锈性能达到2-3年。
又比方说不浸油的锌系磷化耐盐雾实验4小时，浸油后在磷化膜不变的情况下却能大大地提高耐盐雾腐蚀能力。
耐腐蚀能力可以提高20倍以上。
如果用更好的防锈油可以进一步提高耐腐蚀性能。
如果浸的是差品质的防锈油，虽然也有一定的防锈性能，但是耐盐雾实验会很差，满足不了客户的要求，严重的会丢掉客户。
可见，防锈油的质量的好坏，是影响零件的耐腐蚀性能的关键。
Customer instructions:
Mechanical parts of the immersion oil processing, make the whole surface keep a kind of reservoir and greatly enhance the resistance of the parts
Corrosion resistance.
Usually is not oil-immersed three times or more.
Assume that not oil-immersed zinc manganese series phosphating antirust performance is 18 months, and immersion oil after the parts can be antirust performance reach 2-3 years.
And say not oil-immersed zinc series phosphating resistance to salt fog experiment 4 hours, immersion oil after phosphating film in the same situation but it can greatly improve the ability of corrosion resistance to salt fog. 宁波脱水防锈油厂家
Corrosion resistant ability can improve more than 20 times.
If better use of the anticorrosive oil can further improve the corrosion resistance performance. 嘉兴脱水防锈油厂家
If immersion is poor quality of rust-preventative oil, though there are also certain rust resistance, but resistance to salt fog experiment will be very bad, can't satisfy the customer requirements, serious lose customers.
Visible, rust-proof oil quality is good or bad, is affects the components of the corrosion resistance performance of the key.
