更多产品资料可来电咨询：周先生 13524226693 /021-64286281
Bypass
Bypass Ethernet ports on Power lose
•
Reliable Passive solution
•
High speed switching
•
Low insertions loss
•
Throughput not affected and no added delay
•
PBSSF-M50
Supports Fiber Gigabit Ethernet (1000Base-SX)
•
Supports Short Range Fiber 10 Gigabit Ethernet (10GBase-SR)
•
Fiber Gigabit Ethernet General Technical Specifications - (1000BaseSX)
IEEE Standard / Network topology
Fiber Gigabit Ethernet, 1000Base-SX (850nM)
Cables and Operating distance
Multimode fiber:
550m at 50 um **
**Theoretical Distance – Defined as half a distance as stated by the IEEE 802.3 standard
Insertion loss (Normal)
Typical: 0.97 dB
Maximum: 1.8 dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.3+1.2+0.3=1.8dB)
Minimum: 0.9dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.1+0.7+0.1=0.9dB)
Insertion Loss (Bypass)
Typical: 1.69 dB
Maximum: 1.8 dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.3+1.2+0.3=1.8dB)
Minimum: 0.9dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.1+0.7+0.1=0.9dB)
Fiber 10Gigabit Ethernet Technical Specifications - (10GBase-SR) Adapters
IEEE Standard / Network topology
Fiber Gigabit Ethernet, 10GBase-SR (850nM)
Data Transfer Rate
20Gbit/s in full duplex mode per port
Cables and Operating distance
Multimode fiber:50um
50um, 400MHz/Km 66m
50um, (OM2)500 MHz/Km 82m
50um, (OM3)2000MHz/Km 300m **
Theoretical Distance – Defined as half a distance as stated by the IEEE 802.3 standard
Insertion Loss (Normal)
Typical: 0.97 dB
Maximum: 1.8 dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.3+1.2+0.3=1.8dB)
Minimum: 0.9dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.1+0.7+0.1=0.9dB)
Insertion Loss (Bypass)
Typical: 1.69 dB
Maximum: 1.8 dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.3+1.2+0.3=1.8dB)
Minimum: 0.9dB (Sum of insertion losses: LC/LC+ fibers and optic switch+LC/LC=.0.1+0.7+0.1=0.9dB)
PBSSF-M50 : General Technical Specifications
Size
x 152mm x 120.5mm x 24mm (6" x 4.75" x 1")
Voltage
+5V
Weight
690 gram (24.4 oz)
Power Consumption
(0.184W) 40mA at 4.6V
Operating Humidity
0%–90%, non-condensing
Operating Temperature
0°C – 50°C (32°F - 122°F)
Storage Temperature -20°C–65°C (-4°F–149°F)
EMC Certifications ClassB
MTBF* > 50 years
PBSSF-M50 : LED Connector Specifications
LEDs (1) LED
Blue LED indicating Power /Bypass
Connectors (2) Quad LC per segment
RJ45 Control connector – Pin 5 5v, Pin 4 GND, pin 1 and pin 2 are shorted
P/N Description
PBSSF-M50-R 10 /1 Gigabit (MM) Fiber Bypass Switch Stand Alone Unit
RK-1U-3-PBSS 1U Rack Mount Kit for Three PBSS products
Note: Model P/N /-RoHS
-R: RoHS Compliant / Lead free adapter
1V0aa
