LR165D双色（双物料）橡胶鞋底专用注射机

技术参数表Technical
Parameters

产品优势介绍：

1,全世界第一台双色（双物料）橡胶鞋底注射机，可用于注射生产双色橡胶鞋底，配合嵌色技术可生产三色以上橡胶鞋底。

2,欧洲最先进的橡胶鞋底生产技术，针对橡胶鞋底专门设计，结构紧凑，全自动化生产，一个工人可操作4台

3，只需将橡胶条送入喂料口，即可实现自动计量、预热、注射，自动移出模具、开模，全自动化生产流程，大大提高了生产效率，降低了工人劳动强度，最大化保护模具。

4，采用先合模再注射的成型工艺，极大的减少产品飞边及修边成本，产品致密性好，提高了产品的内在质量。

5，人性化操作界面，可设置硫化时间、注射量、预热温度、硫化温度、放气等参数，并有故障诊断系统，可以指导维修人员在最短时间内排除故障。

6，配备自动换模系统，5分钟内可以更换一套模具。

7，先进节能的液压控制系统，适合24小时连续运转、高速响应，节能高效。

8，单色注射机做嵌色产品，有效的解决橡胶混色问题，大大提高了嵌色产品的成品率、质量，并减少了后续的人工再处理成本。

9，可选配抽真空系统，彻底解决胶料内窝气问题。

10，可选配电加热和油加热两种加热系统。

Advantages for LR165D
rubber injection for shoe sole:

1, the first
two-color (material) rubber soles injection molding machine can be used for
injection to produce two-color rubber soles in the world, with embedded color
technology to produce more than three-color rubber soles.

2, Europe's most
advanced technology of rubber soles production, designed special for rubber
soles, compact, fully automated production, one worker can operate six
stations.

3, only put the
rubber strip into the feeder, you can achieve automatic metering, preheating,
injection, and automatically moving out the mold, opening mold, fully automated
production process, greatly improving production efficiency, reducing labor
intensity, protecting the mold.

4, the process of
injection after clamping, greatly reducing the product flash and trimming
costs, the product is more compact, to improve the intrinsic quality of the
product.

5, With human
interface, you can set the curing time, injection volume, preheat temperature,
curing temperature, exhausting parameters, and fault diagnosis system that can
guide the maintenance staff to solve the problem in the shortest time.

6, equipped with
automatic die change system, and a mold can be replaced within five minutes.

7,Advanced
energy-saving hydraulic control system can support 24 hours’ continuous
operation, with quickly response, energy efficiency.

8, for insert color
process, single color injection machine will solve the rubber mixing problem
easily, greatly improving the yield of the embedded color products, quality,
and reduce costs of artificial re-treatment.

9, Optional vacuum
system, completely solve the problem of products with air.

10, two kinds of
heating systems is available, electrical heating and oil heating.