TAMNURA Automatic welding device GAW33-36ST
FEATURES
l Spray fluxer is built into equipment with special low-pressure nozzle.
l Top and bottom exhaust filter minimize flux spread contamination.
l 1.5m long powerful far infrared pre-heater
l Titanium solder bath provide energy saving with double layered heatinsulations.
STANDARD FUNCTIONS
l Independent inlet insertion conveyor
l Fluxer automatically adjust spraying to follow the conveyor speed and width.
l Sirocco fan is used for fluxer forced ventilation.
l Flux liquid shortage detect function
l Solder bath overheat detector is built in.
l Variable conveyor angle by 4-5 degrees
OPTION
l Proportioning pump method, flux supply
l Electric bath lifter, motored pulling out
l Claw washer liquid shortage detection
l Intermittent solder jet
l Solder shortage detector
l Solder inner bath leak detection
l PCB warp prevention in solder bath block
l Exterior color can be specified
l Automatic supply of wire solder
l 3-color signal tower
l Outlet conveyor
l PCB cooling fan with variable air flow and direction
SPECIFICATION
|
|
GAW33-36ST |
|
Applicable boards |
MAX W330×L350×t1.6 (mm) MIN W 50×L120×0.6 (mm) |
|
Component hight |
Above Upper MAX.150mmFollowing Below Lower MAX.6mmFollowing |
|
Input Power source |
AC380V±10%-50Hz-3φ 32kVA49A |
|
Conveyor angle |
4~5° |
|
Dimensions of machine |
W1320×L4200※1×H1570※2(mm) |
|
Weight(Excluding solder) |
About Approx.1400kg |
|
Soldering capacity |
About Approx.490kg |
※1 Except inlet and outlet sprockets ※2 Except Exhaust Duct, Signal Tower and LCD Monitor
