l VKB型开槽机是传统设备的升级产品,它与传统设备相比,主要特点是重载、高速、高效。
l 本设备采用框架结构设计,高强度螺栓连接,整体刚性好,变形小。
l 本设备横梁固定不动,工件由送料机构送进工作台面可更换。保证工作台面的平面度在±0.03mm以内。
l 本设备采用碳素工具钢制工作台,淬火后硬度达到HRC55以上。所以工作台磨损很小且可以换面,延长了设备的使用寿命。
l 本设备4KW走刀电机,刀架体同时安装5把切削刀,最大切削深度1.2mm,是传统设备效率的5倍。
l ? VKB type slot machine is the traditional equipment upgrade the product, it with the traditional equipment, compared to the main characteristic is heavy, high speed, high efficiency.
l ? This equipment adopts frame structure design, high strength bolt connection, whole rigid good, small deformation.
l ? This equipment beam fixed motionless, workpiece by feeding mechanism sent to work table can be replaced. Guarantee of workbench face flatness in within±0.03 mm.
l ? This equipment adopts carbon tool steel table, quenching hardness reach above HRC55. So table wear is small and can change face, extend the life of the equipment.
l ? This equipment 4 KW feeding machine, head body at the same time the cutting knife install 5, the maximum cutting depth of 1.2 mm, is a traditional equipment efficiency five times.
主要技术参数Main Technical parameter
加工板厚 | Thickness range for plate to be processed | 0.6mm-4mm |
加工板长度 | Length for plate to be Processied | 4000mm |
加工板宽度 | Width for plate to be Processied | 1220mm |
切削速度 | Cutting velocity | 15m/min-60m/min |
送板速度 | Feed rate | 2m/min-0m/min |
Y轴最小设定单位 | Y axis minimum unit set | 0.01mm |
Y轴最小定位精度 | Y axis minimum positioning accuracy | ±0.05mm |
Z轴最小设定单位 | Z axis minimum unit set | 0.01mm |
Z轴最小定位精度 | Z axis minimum positioning accuracy | ±0.05mm |
气源压力 | Pneumatic pressure | 0.4Mpa-0.6Mpa |
外型尺寸 | Dimension | 5700mm*2200mm*2050mm |
设备重量 | Weight | 9.5T |
主要配置
数控系统 | 中达电通 |
直线导轨 | 台湾上赢或ABBA |
滚珠丝杆 | ABBA |
主轴电机 | 德国SEW |
机床电缆 | 德国易格斯 |
冷却系统 | 贝奇尔 |