自干金属系列油墨

油墨特性：
拥有高光高色泽，主要用于金属表面、白铁表面、不锈钢表面、玻璃表面、UV表面、强化表面、电镀表面等材料上，具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。

印刷：丝印移印均可。

表干及实干时间：表干时间自然挥发5-10分钟；实干时间在24小时以内(加专用固化剂)。

稀释及清洗：SV3慢干开油水、UVK1（移印开油水）同时可使用718洗网水清洗。

测试方法（完全干燥后）：
1、3m胶纸粘在画有百格的油墨表面，45度角迅速拉起不脱油;
2、纯度99%的工业酒精，一千克砝码用棉布包住在油墨表面，以水平力来回拉200次无脱色;
3、 耐磨：橡皮擦500g力水平来回擦500次。

使用方法：
1、使用前应充分搅拌，用后随时封闭；
2、搅拌时加开油水10-15%，稀释到印刷粘度如需自干加专用固化剂5%-10%.
3、网板塞网时可用洗网水清洗；
4、不得与其它类型油墨混合使用。

注意事项：
1、塑胶材料的外观相似，但可能会是不同的材料，客户需试印确定其符合要求后，再批量印刷；
2、在移印过程中，如出现拉丝或散开，可适当加入一些慢干膏即可;
3、环境温度过高，将会影响油墨原有质量；
4、根据气候变化，请远离火源，阴暗环境下存放。
Since the dry metal series ink printing ink characteristics: have highlights high colour and lustre, mainly used for metal surface, and tin surface, stainless steel surface, glass surface, UV surface, strengthen the surface, electroplating materials such as surface, with its high colour and lustre, high color, high covering power, high stability, resistant to alcohol and friction resistance characteristic. Printing, screen printing moving printing all can. Table dry and work time: dry time table natural volatilize 5-10 minutes; Work in time within 24 hours (plus special curing agent). Dilution and cleaning: SV3 slowly open oil and water, dry UVK1 (moving printing open oil and water) and can use clean water to wash the nets 718. Test method (dry) : 1, 3 m tape is stuck in the picture has the case of printing ink surface, 45 degree Angle quickly pull up not to take off the oil; 2 and purity, 99 � and � � industrial alcohol, a kilogram of Jordan farmar cover with cotton cloth in ink surface, with the level force and 200 times back and forth without decoloring; 3, wear-resisting: the eraser 500 g force level wipe 500 times back and forth. Method of use: 1, before the use should be fully mixing, after using closed at any time; 2 when the oil and water, stir number 10-15 � F � � dilution to printing viscosity should do with the special curing agent 5 � 0 � 20 3, sheet stuffed nets can be used when washing nets water cleaning; 4, not with other kinds of printing ink mixed use.