供应MCS7810 -- USB 2.0 to Serial Controller
|
MCS7810 -- USB 2.0 to Serial Controller New! |
|
| The MCS7810 is a USB-2.0 to Serial Port device. It has been developed to connect a wide range of standard serial devices to a USB host.
Support for the following serial communication programs is included: HyperTerminal, PComm, Windows direct connection, Windows dial-up connection through modem, Networking over IrDA and Windows direct connection over IrDA, Minicom.
|
 规格:
- USB-2.0 Device Controller
- On-Chip USB-2.0 PHY
- On-Chip Voltage Regulators
- 16c450/16c550 compatible UARTs
- Supports SIR IrDA Mode
- Supports RS-232, RS-485 and RS-422 Serial Port
- 5, 6, 7 and 8-bit Serial Data support
- Hardware and Software Flow Control
- Serial Port speeds from 50 bps to 6 Mbps
- Custom BAUD Rates supported through external clock and/or by programming the internal PLL
- On-Chip 512-Byte FIFOs for upstream and downstream data transfers for each Serial Port
- Supports Remote Wakeup and Power Management features
- Serial Port Transceiver Shut-Down support
- Two-Wire I2C Interface for EEPROM
- EEPROM read/write through USB
- iSerial feature support with EEPROM
- On-Chip buffers for Serial Port signals to operate without external Transceivers over short cable lengths
- Bus-Powered Device
- 48-pin LQFP Package RoHS compliant
- Operating temperature range: 0°C to +70°C
|
| 目标应用: |
| |
- Serial Attached Devices
- Modems, Serial Mouse, Generic Serial Devices
- Serial-Port Server
|
- Data Acquisition System
- POS Terminal and Industrial PC
| |
|
|
| MCS7810 Demo Board |
|
|
 |
可提供 |
| |
This is a USB 2.0 to Serial adapter for MCS7810 USB 2.0 to Serial application |
|
