本试验装置为桌上型, 符合UL 2556标准要求。适用于检测电线绝缘体和被覆体的哑铃状试片厚度。

测量范围：0.01～10mm,最小分度:0.01mm。（日本三丰百分表）

荷重砝码：85±3g

试样测头：ø6.4±0.2mm

下 测 帖：2×9mm

大理石台座：150×200mmm

试验方法

1、松开大理石台座固定旋钮，调整上下高度使百分表的指针指到零位。

2、取哑铃状被测样品，按下百分表的提升杆，将样品放在6.4mm测头

下，放下提升杆，直接读取百分表的数值。即被测样品的绝缘厚度。

UL 2556标准参考

4.2 Physical properties (ultimate elongation and tensile strength)

e) a dial micrometer having a 6.3 to 6.4 mm (0.248 to 0.252 in) diameter flat presser foot

exerting a total force of 0.83±0.03 N (3.0±0.1 ozf) on a rectangular anvil measuring

approximately 9 x 2 mm (0.35 x 0.08 in). The face of the anvil on the minor dimension shall be slightly convex. Alternatively, these measurements shall be made with a dead-weight dial micrometer having a presser foot 6.4±0.2 mm(0.248±0.010 in) in diameter and exerting a total of 85±3 gf or 0.83±0.03 N (3.0±0.1 ozf) on the specimen – the load being applied by means of a weight. The presser foot shall be at least 2 mm (0.08 in) onto the edge of the specimen for each measurement. Micrometers shall have a resolution and accuracy of 0.01 mm (0.001 in);