CSD Series Current Devices
Code No. LIT-1900454
Issued August 12, 2008
Description
The Current Switch Device (CSD) Series of
digital output current switches are
non-intrusive devices designed to detect
current flowing through a cable or wire. A
cost-effective solution for monitoring on and
off status or proof of operation, these units are
ideal for monitoring very small current loads
on motors driving fans, blowers, pumps,
heating coils, and lighting.
The CSD models with command relays not
only monitor the current flowing through the
cable but also facilitate the start and stopping
of the motor.
These units also provide a universal
solid-state output and do not require a power
supply. Completely self-powered, these units
draw their power from current induced from
the cable or line being monitored.
CSD Series Current Devices are available in
the following types:
?solid core, setpoint fixed
?solid core, setpoint adjustable
?solid core with command relay,
setpoint adjustable
?split core, setpoint fixed
?split core, setpoint adjustable
?split core with command relay,
setpoint fixed
?split core with command relay,
setpoint adjustable
Refer to the CSD Series Current Devices
Product Bulletin (LIT-12011292) for important
product application information.
Features
?dual function ?monitors current and motor
start and stop
?100% solid-state output ?has no moving
parts to fail
?polarity insensitive output ?provides
easier wiring
?snap-in mounting bracket ?simplifies
installation
?small size ?fits in tight enclosures
Fixed Setpoint Models
CSD-SF0C0-1 (solid core)
?Setpoint fixed at 0.25 A
?Current range ?0.25 to 200 A
CSD-CF0A0-1 (split core)
?Setpoint fixed at 0.15 A
?Current range ?0.15 to 200 A
CSD-CF0J0-1 (split core)
?Setpoint fixed at 1.5 A
?Current range ?1.5 to 200 A
CSD-CF0J1-1 (split core with command relay)
?Relay Single Pole, Single Throw (SPST),
Normally Open (NO), 10 A @ 260 VAC, 5A
@ 30 VDC
?Actuation coil ?20-30 VAC/DC,
32.5 mA maximum
?Setpoint fixed at 1.5 A
?Current range ?1.5 to 200 A
Adjustable Setpoint Models
CSD-SA1E0-1 (solid core)
?Multi-turn potentiometer ?adjust setpoint
for application
?Adjustable setpoint ?wide range from
1.0 to 135 A
?Two status Light-Emitting Diodes (LEDs)
?provide visual indication of off and on
status
CSD-SA1E1-1 (solid core with command
relay)
?Multi-turn potentiometer ?adjust setpoint
for application
?Adjustable setpoint ?wide range from
1.00 to 135 A
?Relay SPST, NO, 10 A @ 260 VAC,
5 A @ 30 VDC
?Actuation coil ?20-30 VAC/DC,
32.5 mA maximum
?Two Status LEDs ?provide visual
indication of off and on status
CSD-CA1G0-1 (split core)
?Multi-turn potentiometers ?adjust setpoint
for application
?Two status LEDs ?provide visual
indication of off and on status
CSD Series Current Device
?Adjustable setpoint ?wide range from 1.25
to 135 A
CSD-CA1G1-1 (split core with command
relay)
?Multi-turn potentiometers ?adjust setpoint
for application
?Adjustable setpoint ?wide range from
1.25 to 135 A
?Relay SPST, NO, 10 A @ 260 VAC,
5 A @ 30 VDC, 12.8-26mA
?Actuation coil ?20-30 VAC/DC,
32.5 mA maximum
?
?Two status LEDs ?provide visual
indication of off and on status
Repair Information
If the CSD Series current device fails to
operate within its specifications, replace the
unit. For a replacement CSD, contact the
nearest Johnson Controls?representative.
Selection Chart
Code Number Core Type Setpoint
Threshold
LED Display Low Setpoint
(Amperes)
Output Relay
CSD-SF0C0-1 Solid Fixed No 0.25 No
CSD-SA1E0-1 Solid Adjustable Yes 1.00 No
CSD-SA1E1-1 Solid Adjustable Yes 1.00 SPST, NO, 10 A @ 260 VAC, 5 A @ 30 VDC
CSD-CF0A0-1 Clamp/Split Fixed No 0.15 No
CSD-CF0J0-1 Clamp/Split Fixed No 1.5 No
CSD-CA1G0-1 Clamp/Split Adjustable Yes 1.25 No
CSD-CF0J1-1 Clamp/Split Fixed No 1.5 SPST, NO, 10 A @ 260 VAC, 5 A @ 30 VDC
CSD-CA1G1-