东莞市金颗粒塑胶化工有限公司
姓名：张帅为
手机：13827245422 电话：0769-82119687 82115736
传真：0769-87126971 QQ:303348442
邮箱：303348442@qq.com
网址：www.sylsj.com
地址：东莞市樟木头塑胶原料市场3期A36号
东莞市金颗粒塑胶化工有限公司 供应新一代共聚聚酯材料-TRITAN<IMG title="美国伊斯曼TRITAN PCTG TX1001 耐高温食品级不含双酚A 奶瓶专用塑胶原料" alt="美国伊斯曼TRITAN PCTG TX1001 耐高温食品级不含双酚A 奶瓶专用塑胶原料" src="/appstyle/expression/emimage/ee94b7.png" width=20 height=20>：美国伊斯曼TX1001，吹瓶级、高透明、耐高温、符合国际FDA认证，食品级不含双酚A，做婴儿奶瓶专用料！高韧性，高抗冲，水煮不变形。 供应新一代共聚聚酯材料-TRITAN™的详细描述：90%,雾度
PCTG有PC的冲击强度，PMMA的透明度，不含双酚A。可用于婴儿奶瓶，耐开水蒸煮。
Eastman TritanTX1001 is an amorphous copolyester with excellent appearance and clarity.
EastmanTritanTX1001 contains a mold release derived from vegetable based sources. Its most
outstanding featuresare excellent toughness, hydrolytic stability, and heat and chemical
resistance. This new-generation copolyester can also be molded into various applications without
incorporating high levels of residual stress. Combined with Tritancopolyester’s outstanding
chemical resistance and hydrolytic stability, these features give molded products enhanced
durability in the dishwasher environment, which can expose products to high heat, humidity and
aggressive cleaning detergents.TritanTX1001 copolyester may be used in repeated use food
contact articles under United States Food and Drug Administration (FDA) regulations.Tritan
TX1001 copolyester is certified to NSF/ANSI Standard 51 for Food Equipment Materials.
Typical Properties (Preliminary)
Specific Gravity D 792 1.18
Mold Shrinkage D 955 0.005-0.007mm/mm
(0.005-0.007in./in.)
Tensile Stress @ Yield D 638 43MPa (6200psi)
Tensile Stress @ Break D 638 53MPa (7700psi)
Elongation @ Yield D 638 6%
Elongation @ Break D 638 210%
Tensile Modulus D 638 1550MPa (2.25)
Flexural Modulus D 790 1550MPa (2.25)
Flexural Yield Strength D 790 62MPa (9000psi)
Rockwell Hardness, R Scale D 785 112
Izod Impact Strength, Notched @ 23°C (73°F)D 256 980J/m (18.4ft·lbf/in.)
Impact Strength, Unnotched @ 23°C (73°F) D 4812 NB
Deflection Temperature
@ 0.455 MPa (66 psi) D 648 99°C (210°F)
@ 1.82 MPa (264 psi) D 648 85°C (185°F)
Total Transmittance D 1003 90%
Haze D 1003 <1%
Drying Temperature 88°C (190°F)
Drying Time 4-6hrs
Processing Melt Temperature 260-282°C (500-540°F)
Mold Temperature 38-66°C (100-150°F)
Comments
Properties reported here are based on limited testing. Eastman makes no representation
thatthe material in any particular shipment will conform exactly to the values given.
