详细介绍

HONDA INTERFACE MODULE是HONDA公司最新的检测仪器，软件覆盖1992年到最新生产的HONDA/ACURA所有车型，支持检测的系统包括：动力、车身、底盘、ABS、SRS、防盗等，并支持CAN数据总线车型，能够对汽车控制模块进行重新编程。HIM采用PC作为工作平台，通过HIM通讯模块与车辆进行通讯，中文操作界面，是检测本田汽车最理想的工具。

产品功能:HONDA INTERFACE MODULE是HONDA公司最新的检测仪器，软件覆盖1992年到最新生产的HONDA/ACURA所有车型，
支持检测的系统包括：动力、车身、底盘、ABS、SRS、防盗等，并支持CAN数据总线车型，能够对汽车控制模块进行重新编程。
HIM采用PC作为工作平台，通过HIM通讯模块与车辆进行通讯，中文操作界面，是检测本田汽车最理想的工具。

检测系统：
动力燃油喷射　
自动变速箱
安全气囊
防盗/防启动
防抱死系统
牵引控制系统
汽车稳定系统
4轮轮转向
扭矩变换器系统
电动助力转向
牵引模块
无钥匙进入
轮胎压力监控系统
控制模块
故障码
冻结数据框
集成的马达辅助
超级操纵-全部轮驱动
主要功能:
读故障码，清故障码
读数据流
<绘制数据流趋势曲线
系统设定
控制单元编程
自动检侧仪器内部状态
记录和回放
双向控制功能--在驱动执行元件同时，读取响应数据

产品特点:
1、有故障码冻结帧数据，可分析故障发生时数据，方便维修
2、有完善的动作测试及波形显示功能
3、可对现实数据和标准数据对比，分析故障
4、当系统存在故障时可通过仪器故障引导进行维修，相当于你请了一个专家一样，快捷准确
5、产品支持语言：加拿大，欧洲，美国，日本等区域所使用的语言
产品配置:
1 HIM主机1台(OBDII线)
2 DVD光盘1张
3 3Pin线条,Lin网线(RS232接头) 1根 电源1个

Product Name:    Honda Diagnostic System kit 
Part No.:              A105
Net Weight:         3.5KG

Description:  
This interface module kit works with the OEM-Honda Diagnostic PC Software (HDS). It can diagnose all Honda and Acura vehicle systems on models from 1992 to year 2008, including CAN-BUS system.

Functions supported by Honda/Acura protocols:
Reading and decoding fault codes from control blocks' memory;
Deleting fault codes;
Displays system's current parameters in digital form;
Displays system's current parameters in graphical form;
Combined displaying of data;
Management of executive devices;
Logs keeping - writing and keeping of digital parameters in memory;
Special functions - changing of permissible settings of blocks, programming etc.

Functions supported by OBD-II protocols:
Mode 1 - Displays system's current parameters in digital form (up to 8 parameters at once);
Mode 2 - Displays parameters of "freeze" frame;
Mode 3 - Reading and decoding of fault codes from control block's memory;
Mode 4 - Deleting of fault codes (memory clearing);
Mode 5 - Displays results of oxygen sensors;
Mode 6 - Displays results of changeably controled systems and components;
Mode 7 - Displays results of constantly controled systems and components;
Mode 8 - Management of executive devices;
Mode 9 - Displays car's identification info.

Hardware and software requirements:
PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to HIM (PC version software only)
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Internet connection (high-speed connection recommended)

Honda Diagnostic System kit includes:
1 x HIM with OBD II Cable
1 x DVD
1 x 3 Pin Cable
1 x RS232 Cable
2 x Selftest Adapter
1 x Storage Case