机型特点Model features

一．结构Structure

1.高强度、高精密的机架，采用钢板焊接及消失模HT250铸铁2种，并经退火处理，消除床身内应力，增加机身韧性及强度。

High strength, high precision of the rack, is welded by steel plate and EPC cast iron2HT250, and after annealing treatment to eliminate internal stress, bed, increase the toughness and strength.

2.结构件负荷均匀，刚性平衡。

Pieces of the structure of uniform load, rigidity balance.

3.传动中心与机器整体的中心趋于一致，确保冲压的精确、稳定。

Transmission center and the whole machine centers tend to be consistent, ensure the stamping precision, stable.

二．安全Safety

1. 金合力所有机器都配备了先进的干式刹车离合器，再加上精确敏锐的双联电磁阀能在最大限度内缩短刹车时间。另外，刹车辅助系统二度落装置在突发事件中，当检测到刹车刹不住时，会再次提供刹车信号，以再次提供刹车信号，以提供足够动力保证及时准确刹车。

Jinheli all machines are equipped with advanced dry braking clutch, coupled with precise sharp double solenoid valve can in maximum shortening braking time. In addition, brake assist system two degree drop device in the event of an emergency, when detecting the brake does not live, will again provide the brake signal, to once again provide the brake signal, in order to provide sufficient power to ensure timely and accurate brake.

2. 最高程度的保护使用者是我们的最大目标。因此，双手操作按钮之间以及与机身之间都留出足够空间，以保护人手的安全，同时，在系统设计中规定了双手同时操作才能起动，以确保以免误操作造成的人身伤害。光电保护装置或者防护网的加装都进一步提高了对使用者的保护。

The highest degree of protection of users is our greatest goal. Therefore, the hands operation button and between the fuselage and leave enough space between, in order to protect the people 's safety, at the same time, in the system design are provided in both hands simultaneous operation to start, in order to ensure to avoid misoperation caused personal injury. Photoelectric protection device or a protective net which can further improve the protection to users.

3. 金合力冲床都标准配置了进口的过负载装置以保护冲床由于过载冲压，造成模具的变形损坏，同时，还可以加装误送检测装置可配合自动冲压模具装置，以更好的保护模具。

Jinheli presses are standard configuration of the imported over load device to protect the punch due to overload caused by stamping, mold damage, at the same time, can also be added to fault detection device can be matched with automatic punching die device, in order to better protect the mold.

三．精度高High precision

1.精密度高达0.05mm，生产更具安全、稳定和效率。

High precision of 0.05mm, the production of more safety, stability and efficiency.

2.所有的零部件（含机身、曲轴、滑块等）都经过各类不同的工艺处理，如去应力等，以保证产品精度的稳定。

All of the parts (including the fuselage, crank, slider ) through various processes, such as stress, to ensure product accuracy and stability.

3. 所有材料都是同类产品中最高级别的材料，以确保机器的稳定性和精密度。

All materials are similar products in the highest levels of material, to ensure the stability of machine and precision.

四、加工自动化Process automation

可搭配任何的自动送料机构，设定好各参数，配置好相关感应后，一人可以管理5-8台机器，进行自动化生产、降低成本，提高效率。

Can match any of the automatic feeding mechanism, setting the parameters, configuration related to induction, one person can manage5-8 machines, automatic production, reduce costs, improve efficiency.

五、环保Environmental protection

外形美观，低噪音、低消耗、节省能源，流畅简洁的外观更能体现出先进的设计理念。

Beautiful appearance, low noise, low consumption, energy saving, smooth and neat appearance to reflect more advanced design concepts.

配置To configure

Technical Parameter技术参数：