供应气液增压机FBY-Z02供应 C型压机
玉环方博机械有限公司
中国 台州
产品属性
图文详情
品牌推荐
供应 C型增压机 多功能气液增压机 玉环气液增压机 可定制非标型气液增压机，欢迎来电咨询气液增压机价格，免费保修一年（小型气液增压机） 产品特点
1.小型气液增压机C型机身设计，占用空间小，方便操作。
2.小型气液增压机利用空油增压原理，达到动作速度快，高出力的要求。
3.小型气液增压机没有油压系统待机时所产生的噪音，可节省电力消耗从而降低生产成本。
4.小型气液增压机出力调整容易，只要调整气压压力，就能达到所需压力。
5.安全设计，采用双手操作，设有紧急停止按钮及上下点动功能。
6.按键与脚踏两种循环启动方式，可任意调整下压速度与时间。
7.小型气液增压机广泛用于零部件的压型、压弯、冲孔、压印，及轴类零件的校正和压装等。Product feature1.The C-bodydesign, use small space and easy to operate.2.Using the Principle of supercharger, get high speed and large output forces.3. No hydraulic system noise, can save electricity consumption and thus reduce production costs.4. Output adjustment as easy as adjusting the air pressure, can achieve the required pressure.5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.6. Key and Foot Switch two cycle start modes. Pressure Speed can be adjusted.7. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc. 技术参数 Technical parameters 规格单位FBY--Z02SpecificationsUNIT最大工作高度mm260Max working height总行程 Total strokemm100增压行程 Pressure strokemm15工作台尺寸 mm280x280The size of the working table使用压力 pressureMpa0.4-0.7模柄孔径mm φ25Mold mounting hole电源规格 Power (3ΦAC,50Hz)VAC220V,50HZ使用压力单位理论压力Using pressureUNITTheory pressure0.4Mpa13.49KN(181kfg)0.5Mpa16.93KN(227kfg)0.6Mpa20.33KN(272kfg)0.7Mpa23.61KN(317kfg)
1.小型气液增压机C型机身设计，占用空间小，方便操作。
2.小型气液增压机利用空油增压原理，达到动作速度快，高出力的要求。
3.小型气液增压机没有油压系统待机时所产生的噪音，可节省电力消耗从而降低生产成本。
4.小型气液增压机出力调整容易，只要调整气压压力，就能达到所需压力。
5.安全设计，采用双手操作，设有紧急停止按钮及上下点动功能。
6.按键与脚踏两种循环启动方式，可任意调整下压速度与时间。
7.小型气液增压机广泛用于零部件的压型、压弯、冲孔、压印，及轴类零件的校正和压装等。Product feature1.The C-bodydesign, use small space and easy to operate.2.Using the Principle of supercharger, get high speed and large output forces.3. No hydraulic system noise, can save electricity consumption and thus reduce production costs.4. Output adjustment as easy as adjusting the air pressure, can achieve the required pressure.5. Safety designed, using both hands to operate, with emergency stop button and jog up and down function.6. Key and Foot Switch two cycle start modes. Pressure Speed can be adjusted.7. Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc. 技术参数 Technical parameters 规格单位FBY--Z02SpecificationsUNIT最大工作高度mm260Max working height总行程 Total strokemm100增压行程 Pressure strokemm15工作台尺寸 mm280x280The size of the working table使用压力 pressureMpa0.4-0.7模柄孔径mm φ25Mold mounting hole电源规格 Power (3ΦAC,50Hz)VAC220V,50HZ使用压力单位理论压力Using pressureUNITTheory pressure0.4Mpa13.49KN(181kfg)0.5Mpa16.93KN(227kfg)0.6Mpa20.33KN(272kfg)0.7Mpa23.61KN(317kfg)
