首熙速冷速热模温机特点

优点：

1、可完全清楚产品表面夹水纹，熔接痕，银丝纹

2、可以解决塑料产品表面缩水问题

3、提高产品表面光洁度，使产品表面光洁度可达到镜面效果

4、高光产品不需要喷油加工，相应环保，提高成品率20-30%

5、在速冷速热的情况下，使成型周期大大缩短

特点：

1、三菱触摸式电脑控制，全中文界面，操作简单

2、全闭环系统控制输入输出温度的检测，以模具实际温度反馈PLC，数彩图变化显示，确保输出准确稳定

3、高温蒸汽，冷水，空气温度及压力六项报警，用时间和动作与注塑机信号互锁

4、单变路模具温度检测（可选），输入输出管道采用不锈钢管，多组输入输出接口

Advantages

1、Remove seam trace,wrinkle and silver stread from product surface

2、Eliminate shrinkage of plastic product surface thoroughly

3、Increase product surface smoothness just likea mirror surface

4、Do not need post-puocessing for this puoduct,and increase the yield of
finished product between 20~30%

5、Eliminate floating fiber of fiber-reinforced products and makeproduct more
complete

6、In case of thin wall forming,increase injection moulding
flowability,product quality,and strength;incase of thick

7、Wall forming,decease the injection moulding period by more than 60%

Characteristics

1、8 inch LCD(optiona),touch type Chinese digital input,Chinese interface,easy
operation

2、Full-closed loop system to control input and output temerature
detection,feed back actual temperature of the mouldto PLC,indicate digital color
figure change,and assure correct and stable output

3、High temperature water,cool water,air temperature and pressure
alarms,injection moulding,Machine signal interlock with time and action

4、Double-way mould temperature detection,input and output pipe available in
40 stainless steel,12 groups of input and output interfaces