OUR-REF: 635517 Gentlemen: Please quote the following ITEM: 1-EA 2204.010.0034 P...

• Make: Terex
• Model: Unknown
• Part No: 22040100034
• Category: Forklift Parts

Aluminium body hydraulic gear pumps and motors

Virtual 360° view Pdf in Reserved Area Multimedia in Reserved Area Features Gear pumps and motors built in three pieces with an extruded body in high resistance aluminium alloy. The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in an infinite variety of applications. Displacements from 0.07 in³/rev (1,07 cm³/rev) to 5.56 in³/rev (91,10 cm³/rev) available in groups 10, 20 and 30 Max. peak pressure up to 4350 psi (300 bar) Max. speed up to 4000 min-1 High efficiencies Integrated outboard bearings for heavy duty applications Multiple units available in standard version, common inlet and separated stages Electro-hydraulic fan drive system Custom design Built-in valves Anti-cavitation valves Maximum pressure relief valves Priority valves “Load sensing” priority valves By-pass electric valves Proportional relief valves Reverse valves     Virtual 360° view Other informations Features Gear pumps built in three pieces with an extruded body in high resistance aluminium alloy. WHISPER is a new and original technology protected by international patents and applied to a family of external gear pumps and motors that feature low noise emissions. The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in an infinite variety of applications. Displacements from 0.07 in³/rev (1,12 cm³/rev) to 5.91 in³/rev (96,85 cm³/rev) available in groups 10, 20 and 30 Max. peak pressure up to 4350 psi (300 bar) Max. speed up to 4000 min-1 High efficiencies Low noise emission Integrated outboard bearings for heavy duty applications Multiple units Custom design 铸铁体液压齿轮泵及马达 Cast iron body hydraulic gear pumps and motors     Pdf in Reserved Area Features Gear pumps and motors built in three pieces with cast iron body. The new gear pumps and motors "PH" series is an evolution of the "POLARIS" series. "POLARIS PH" has a new body made of cast iron to have higher operating parameters and keep the full POLARIS versatility regarding shafts, flanges, ports and built-in valves. This project is targeted for forklifts, skid steer loaders and all those applications where traditional aluminium pumps are being pushed close to their limits. The possibility to mate the body with the cast iron covers further reduces noise levels, in addition to increasing strength. Displacements from 1.16 in³/rev (19,09 cm³/rev) to 2.01 in³/rev (33,03 cm³/rev) Max. peak pressure up to 4350 psi (300 bar) Max. speed up to 3500 min¹ High working pressure also for high displacements Long service life Low noise level High volumetric efficiency also at high temperature Inlet & Outlet optimization – High speed Combination in multiple pumps Built-in Valves simplify circuit design Built-in valves Anti-cavitation valves Maximum pressure relief valves Priority valves “Load sensing” priority valves By-pass electric valves Proportional relief valves Reverse valves     Virtual 360° view Pdf in Reserved Area Pdf in Reserved Area Features Gear pumps and motors made of cast iron in two pieces. A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space. Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30 and 40 Max. peak pressure up to 4785 psi (330 bar) Max. speed up to 4000 min-1 High operating pressures High efficiency at high temperature Low noise emission Exceptional working life expectancy Solid and compact design Custom design Built-in valves Antishock and anti-cavitation valves Priority valves “Load sensing” priority valves By-pass electric valves     Virtual 360° view Pdf in Reserved Area pdf in Reserved Area Features Gear pumps made of cast iron in two pieces. Ideal for truck application. Displacements from 0.50 in³/rev (8,26 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30, 35 and 40 Max. peak pressure up to 4713 psi (325 bar) Max. speed up to 3000 min-1 High performance also at very low speed Different ports position availability Low noise emission Shaft seal system no leakage guarantee Modular design Direct mounting on the PTOs     Virtual 360° view Pdf in Reserved Area Features Gear pumps and motors made of cast iron in three pieces. An extremely versatile and reliable design, also in the most extreme operating conditions. Displacements from 1.05 in³/rev (17,28 cm³/rev) to 7.66 in³/rev (125,63 cm³/rev) available in groups 30 and 35 Max. peak pressure up to 4640 psi (320 bar) Max. speed up to 3000 min-1 Wide range of drive shafts and flanges in SAE version More choices of port locations Integrated outboard bearings for heavy duty applications Multiple units available in standard version, common inlet and separated stages Exceptional working life expectancy 内置阀门的液压齿轮泵和马达 Built-in valves for hydraulic gear pumps and motors      BUILT-IN VALVES Pdf in Reserved Area Features Anti-cavitation valves, maximum pressure relief valves, priority valves and “load sensing” priority valves built in the following series of gear pumps and motors: POLARIS, WHISPER, KAPPA, New KAPPA Compact Reduced overall dimensions Simplified plant design Wide choices of ports position 齿轮流量分配器 Gear flow piders     Pdf in Reserved Area Features Gear flow piders made of high resistance aluminium alloy. These components can be used as flow equalizers, flow piders and pressure intensifiers. Displacements from 0.13 in³/rev (2,14 cm³/rev) to 2.01 in³/rev (33,03 cm³/rev) available in groups 10 and 20 Max. peak pressure up to 4060 psi (280 bar) Modular design Accurate pision of flow Built-in relief valves Combinations between different groups     Pdf in Reserved Area Features Gear flow piders made of cast iron. These components can be used as flow equalizers, flow piders and pressure intensifiers. Displacements from 1.05 in³/rev (17,28 cm³/rev) to 7.66 in³/rev (125,63 cm³/rev) available in groups 30 and 35 Max. peak pressure up to 4640 psi (320 bar) Modular design Accurate pision of flow High flow Combinations between different groups 固定排量轴向柱塞泵和马达 Fixed displacement axial piston pumps and motors     Virtual 360° view Pdf in Reserved Area Features Fixed displacement bent axis piston pumps. STRADA pumps are ideally suited for PTOs applications in vehicles. Displacements from 2.49 in³/rev (40,9 cm³/rev) to 6.71 in³/rev (110 cm³/rev) available in groups 32 and 37. Max. peak pressure up to 5800 psi (400 bar) Max. speed up to 2950 min-1 Low noise level Direct mounting on the PTOs Compact design High speed High volumetric, mechanical and overall efficiency Available in ISO and UNI standard     LF Pdf in Reserved Area Features Fixed displacement axial piston pumps and motors swash plate design for open circuit applications. The design is extremely compact and it can integrate many functions. An electrically controlled valve can be fitted on the pump and an electronic board controls the flow and the speed of the powered motor. Unidirectional pumps LFP48: displacements from 1.65 in³/rev (27 cm³/rev) to 2.94 in³/rev (48,2 cm³/rev) Reversible motors LFM30: displacements from 1.34 in³/rev (22 cm³/rev) to 1.84 in³/rev (30,2 cm³/rev) Max. peak pressure up to 5075 psi (350 bar) Pump Possibility to have on the pressure line a three-position electrically controlled valve with relief valve Possibility to mount an auxiliary gear pump with common suction Internal drain Motor Reversible rotation with integral antishock valves European and SAE standard mounting flanges Side or rear inlet options Compact size 变量轴向柱塞泵 Variable displacement axial piston pumps     LVP Virtual 360° view Pdf in Reserved Area Features Variable displacement axial piston pumps swash plate design. PLATA pumps are ideally suited for medium and high pressure open circuit applications Displacements from 1.74 in³/rev (28,49 cm³/rev) to 5.37 in³/rev (87,9 cm³/rev) Max. peak pressure up to 5075 psi (350 bar) Max. speed up to 3000 min-1 Energy savings Low noise emission Short response time Drive shaft bearing suitable for radial and axial loads Multiple combinations Controls Pressure compensator Flow and pressure compensator (Load Sensing) Torque limiter Electrohydraulics servocontrols     MVP Pdf in Reserved Area Multimedia in Reserved Area Features Variable displacement axial piston pumps swash plate design ideally suited for open circuit in mobile hydraulic applications. The compact design allows to be mounted directly on engine motors. Displacements from 28,5 cm3/rev (1.74 in3/rev) to 84 cm3/rev ( 5.12 in3/rev). Max. peak pressure up to 350 bar (5100 psi.) Max. speed up to 3000 min-1 Exceptional working life expectancy. Low noise emission. Drive shaft bearing suitable for radial and axial loads. Multiple combinations. Controls Min. and max. displacement limiter. Pressure compensator. Flow and pressure compensator (Load-Sensing). Torque limiter.     DVP Pdf in Reserved Area   SVP Pdf in Reserved Area Features Variable displacement axial piston pumps swash plate design for open circuit applications. SVP single flow, DVP dual flow on piston pump and an additional piggybacked gear pump. The automatic overall torque limiter allows to optimize the performance of the machine. SVP and DVP pumps has been designed specifically for mini excavators where compactness and ease of installation are critical. Piston pump: displacements from 0.48 in³/rev (7,8 cm³/rev) to 0.91 in³/rev (30 cm³/rev) Gear pump: displacements from 0.30 in³/rev (4,95 cm³/rev) to 1.29 in³/rev (21,14 cm³/rev) Max. speed up to 2600 min-1 Compact design Torque limiter Energy savings Low noise emission Long service life Different combinations are available. 液压手动泵 Hydraulic hand pumps     Virtual 360° view Pdf in Reserved Area Features Double acting hand pumps providing flow in both directions of lever movement Displacements from 0.73 in³/cycle (12 cm³/cycle) to 2.75 in³/cycle (45 cm³/cycle) Max. pressure 4568 psi (315 bar) New interchangeable modular design for maximum flexibility Same pumping group with or without reservoir Suitable for auxiliary or emergency applications 过滤器 IKRON Filters   www.ikron.it Ikron “Fluid Filtration” from Casappa “Fluid Power Design” An accurate filtration expands the life of all components and improves the overall efficiency of your hydraulic system. Suction filters Return filters In line filters spin-on type In line medium and high pressure filters Accessories

 (意大利CASAPPA)常用型号

同步分流马达
一、CASAPPA北极星系列铝合金齿轮泵PLP系列

PLP系列齿轮泵PLD10     PLD20     PLD30  

1.排量从1.07cc/rev~91cc/rev，最高转速4000min-1

2.最高压力280bar,峰值压力300bar

3.材质分为泵体铝合金，端盖铸铁或者铸铝

型号列表如下：

 型号         排量   最大连续工作压力   最大转速  

PLP 10系列  bar                      G psi              min 1  

     cm³/rev    G in/rev  

10•1         1,07     G 0.07 260 G 3750 4000  

10•1,5 1,60     G 0.10         260 G 3750 4000  

10•2         2,13     G 0.13 260 G 3750 4000  

10•2,5 2,67     G 0.16         260 G 3750 4000  

10•3,15 3,34     G 0.20         260 G 3750 4000  

10•4         4,27     G 0.26 250 G 3600 4000  

10•5         5,34     G 0.33 250 G 3600 4000  

10•5,8 6,20     G 0.38         230 G 3350 3500  

10•6,3 6,67     G 0.41         230  G 3350 3500  

 10•8 8,51     G 0.52         180  G 2600 3500  

10•10 10,67   G 0.65           140  G 2050   3500  

PLP20 系列           bar   G psi      min1  

  cm³/rev         G in/rev  

20•4          4,95         G 0.30 250  G 3600 4000  

20•6,3 6,61         G 0.40 250  G 3600 4000  

20•7,2 7,29         G 0.44 250   G 3600 4000  

20•8         8,26         G 0.50 250  G 3600 3500  

20•9          9,17         G 0.56 250  G 3600 3500  

20•10,5 10,90 G 0.66 250  G 3600 3500  

20•11,2 11,23 G 0.69 250  G 3600 3500  

20•14 14,53 G 0.89 250  G 3600 3500  

20•16 16,85 G 1.03 250  G 3600 3000  

20•19 19,09 G 1.16 200  G 2900 3000  

20•20 21,14 G 1.29 200  G 2900 3000  

20•24,5 24,84 G 1.52 170  G 2450 2500  

20•25 26,42 G 1.61 170  G 2450 2500  

20•27,8 28,21 G 1.72 130  G 1900 2000  

20•31,5 33,03 G 2.01 130  G 1900 2000  

PLP 30系列 bar            G psi min 1  

        cm³/rev   G in/rev  

30•22 21,99 G 1.34 250 G 3600 3000  

30•27 26,70 G 1.63 250 G 3600 3000  

30•34 34,55 G 2.11 240 G 3500 3000  

30•38 39,27 G 2.40 240 G 3500 3000  

30•43 43,98 G 2.68 230 G 3350 3000  

30•51 51,83 G 3.16 210 G 3050 2500  

30•61 61,26 G 3.74 190 G 2750 2500  

30•73 73,82 G 4.50 170 G 2450 2500  

30•82 81,68 G 4.98 160 G 2300 2200  

30•90 91,10 G 5.56 150 G 2200 2200

PLM20.25R5-4​

二、KAPPA紧凑型系列铸铁齿轮泵KP系列

KP系列齿轮泵KP25   KP30    KP35    KP40

1.排量从19cc/rev~151cc/rev，最高转速3500min-1

2.最高压力280bar,峰值压力300bar

3.泵体材质铸铁，端盖为铸铁

型号列表如下：

 型 号                    排量     最大连续工作压力   最大转速  

KAPPA 25系列 /rev 3 min 1  

         cm³         G in/rev            bar  G psi  

K. 25•19 19,00 G 1.16 280 G 4050 3500  

K. 25•21 21,07 G 1.29 280 G 4050 3500  

K. 25•23 23,06 G 1.41 280 G 4050 3500  

K. 25•25 25,04 G 1.53 280 G 4050 3500  

K. 25•27 27,03 G 1.65 280 G 4050 3500  

K. 25•31 31,09 G 1.90 275 G 4000 3000  

K. 25•34 34,03 G 2.08 275 G 4000 3000  

K. 25•38 38,00 G 2.32 230 G 3350 3000  

K. 25•43 43,01 G 2.62 210 G 3050 3000  

KAPPA30系列                                  

          cm³ G in/rev              bar  G psi  

K. 30•22 21,99 G 1.34 280 G 4050 3000  

K. 30•27 26,70 G 1.63 280 G 4050 3000  

K. 30•31 30,63 G 1.87 260 G 3750 3000  

K. 30•34 34,56 G 2.11 260 G 3750 3000  

K. 30•38 39,27 G 2.40 260 G 3750 3000  

K. 30•41 41,62 G 2.54 250 G 3600 3000  

K. 30•43 43,98 G 2.68 250 G 3600 3000  

K. 30•46 46,34 G 2.83 250 G 3600 3000  

K. 30•51 51,83 G 3.16 230 G 3350 2500  

K. 30•56 56,54 G 3.45 215 G 3100 2500  

K. 30•61 61,26 G 3.74 200 G 2900 2500  

K. 30•73 73,82 G 4.50 180 G 2600 2500  

KAPPA 35系列 /rev 3  

        G in/rev               bar  G psi  

KP 35•63 63,88 G 3.90 260 G 3750 3000  

KP 35•71 72,40 G 4.42 260 G 3750 3000  

KP 35•80 80,91 G 4.94 260 G 3750 3000  

KP 35•90 91,56 G 5.59 245 G 3550 2500  

KP 35•100 100,08 G 6.10 230 G 3350 2500  

KAPPA 40系列 /rev          min1  

                 G in/rev      bar  G psi  

K. 40•63 61,43 G 3.75 300 G 4350           2800  

K. 40•73 72,60 G 4.43 300 G 4350         2800  

K. 40•87 86,56 G 5.28 280 G 4050         2800  

K. 40•109 108,90 G 6.64  250 G 3600         2800  

K. 40•121 121,80 G 7.43  230 G 3350       2500  

K. 40•133 134,03 G 8.18  220 G 3200      2500  

K. 40•151 150,79 G 9.20  200 G 2900         2500  

三、北极星系列液压分流马达（齿轮分配器）PLD系列

PLD系列分为PLD10 PLD20

排量从2cc/rev ~ 31.5cc/rev 额定压力250bar, 峰值压力280bar

CASAPPA液压分流马达PLD系列由高强度铝合金制成，可以用作流量均衡器、分配器与增压器。

特点如下：模块化设计；精确分流；内置溢流阀；不同系列不同型号可组合使用。

型号列表如下：

 型号                     排量          最大连续工作压力  最大转速  

PLP 10系列  

                 (cm /rev   G in/rev)  

PLD 10•2             2,14   G 0.13 250 G 3600 4200  

PLD 10•3,15    3,34  G 0.20           250 G 3600 3990  

PLD 10•4            4,27  G 0.26  250 G 3600 3940  

PLD 10•5           5,34   G 0.33          250 G 3600 3680  

PLD 10•6,3   6,67  G 0.41 250 G 3600 3500  

PLD 20系列                (bar  G psi) min 1

          (cm³/rev  G in/rev)  

PLD 20•4          4,95 G 0.30 250 G 3600 4100

PLD 20•6,3 6,61 G 0.40 250 G 3600 3970

PLD 20•8          8,26 G 0.50 250 G 3600 3850

PLD 20•11,2 11,23G 0.69 250 G 3600 3660

PLD 20•14 14,53G 0.89 250 G 3600 3460

PLD 20•16 16,85G 1.03 200 G 2900 3335

PLD 20•20 21,14G 1.29 200 G 2900 3125

PLD 20•25 26,42G 1.61 200 G 2900 2900

PLD 20•31,5 33,03G 2.01 200 G 2900 2660

四、HDD系列液压分流马达（铸铁齿轮分配器）

HDD系列分为HDD30  HDD35

排量从17cc/rev ~ 125cc/rev 额定压力310bar, 峰值压力330bar

CASAPPA液压分流马达HDD由铸铁制成，可以用作流量均衡器、分配器与增压器。

型号列表如下：

                 排量      最大连续工作压力  最大转速  

HDD 30系列  

                         cm³         G in/rev    bar  G psi rpm     

HDD 30•17 17,28 G 1.05 280 G 4050 3000  

HDD 30•22 21,99 G 1.34 280 G 4050 3000  

HDD 30•27 26,70 G 1.63 280 G 4050 3000  

HDD 30•34 34,56 G 2.11 270 G 3900 3000  

HDD 30•43 43,98 G 2.68 260 G 3750 3000  

HDD 30•51 51,83 G 3.16 230 G 3350 2500  

HDD 30•61 61,26 G 3.74 200 G 2900 2000  

HDD 30•73 73,82 G 4.50 190 G 2750 1700  

HDD 30•82 81,68 G 4.98 170 G 2450 1500  

HDD 35系列                        

                cm³         G in/rev    bar  G psi rpm   

HDD 35•50 51,10 G 3.12 270 G 3900 3000 转/MIN 

HDD 35•63 63,88 G 3.90 270 G 3900 3000  

HDD 35•71 72,40 G 4.42 250 G 3600 3000  

HDD 35•80 80,91 G 4.94 250 G 3600 3000  

HDD 35•90 91,56 G 5.59 230 G 3350 2700  

HDD 35•100 100,08 G 6.10 210 G 3050 2700  

HDD 35•112 112,85 G 6.88 190 G 2750 2700  

HDD 35•125 125,63 G 7.66 170 G 2450 2500

PLP10.6,3L0-81E1-PGD/GD-V-EL                          PLP10.4 S0-36R9-POB/OA-N-L                                                                    

PLP10.3,15S0-36W9-LOB/OA-N                           PLP10.6,3S0-36W9-LOB/OA-N                                                                      

PLP10.8 D0-36R8-LOC/OB-N-L-VPIF(100)               PLP10.2D0-81**-LGC/GC-N-FS                                                                    

PLP10.3,15 D0-81**-LGC/GC-N-FS                       PLP10.4D0-81**-LGC/GC-N-EL

PLP10.4 S0-30S0-LOB/OA-N-EL-C                        PLP10.1 S0-02S0-POB/OA-N-EL                    

 PLP10.3,15 S0-81E1-LGC/GC-N-EL-VPIF(80)         PLP10.3,15 D0-30**-LOB/OA-N-L FS                                                               

PLP10.4 D0-30**-LOB/OA-N-L FS                         PLP10.2 D0-30**-LOB/OA-N-FS-SCP                                                               

PLP10.5 D0-86E1-LBB/BA-N-EL FS                       PLP10.6,3 D0-86E1-LBB/BA-N-EL FS                                                              

PLP10.8 D0-86E1-LBB/BA-N-EL FS                      PLP10.2 D0-81**-LGC/GC-N-FS SCP                                                               

PLP10.3,15 D0-81**-LGC/GC-N-FS SCP               PLP10.1 D0-30S0-LGC/GC-N-EL FS                                                                 

PLP10.2 D0-30S0-LGC/GC-N-EL FS                     PLP10.3,15D0-30S0-LGC/GC-N-EL FS                                                              

PLP10.4 D0-30S0-LGC/GC-N-EL FS                     PLP10.5 D0-30S0-LGD/GD-N-EL FS                                                                

PLP10.6,3 D0-30S0-LGD/GD-N-EL FS                  PLP10.8 SO-29E7-L

PLP10.4 D0-81E1-LBB/BA-V-EL-VPIR/TV              PLP10.1 S0-30R9-LGC/GC-N                                                                      

PLP10.2 S0-30R9-LGC/GC-N                             PLP10.1 D0-36R8-LBB/BA-N-L                                                                    

PLP10.6,3-S0-36R8-LBA/BB-N                           PLP10.3,15D0-81E1-LEA/EA-N-FS                                                                 

PLP10.4 D0-81E1-LEA/EA-N-FS                         PLP10.5 D0-81E1-LEA/EA-N-FS                                                                    

PLP10.6,3 D0-81E1-LEA/EA-N-FS                      PLP10.8 D0-86E1-LBB/BA-N-EL-FS-SCP                                                            

PLP10.10 D0-86E1-LBB/BA-N-EL-FS-SCP             PLP10.3,15 D0-86E1-LBB/BA-N-EL                                                                

PLP10.6,3 D0-86E1-LBB/BA-N-EL                       PLP10.8 D0-86E1-LBB/BA-N-EL                                                                   

PLP10.8 S0-86E1-LBB/BA-N-EL                        PLP10.1 S0-02S0-LOB/OA-N-EL                                                                    

PLP10.2 S0-02S0-LOB/OA-N-EL                        PLP10.3,15 S0-02S0-LOB/OA-N-EL                                       

PLP10.5 S0-02S0-LOB/OA-N-EL                       PLP10.10 D0-02S0-LOC/OB-N-EL                                                                  

PLP10.10 S0-02S0-LOC/OB-N-EL                       PLP10.1,5 S0-02S0-LOB/OA-N-EL                                                                 

PLP10.2,5 S0-02S0-LOB/OA-N-EL-VPIF-(175)      PLP10.3,15 S0-02S0-LOB/OA-N-EL-VPIF                                                 

PLP10.4 S0-02S0-LOB/OA-N-EL-VPIF(100)          PLP10.6,3 D0-30S0-LOC/OB-N-EL                                                                 

PLP10.2 D0-30S0-LOB/OA-V-EL FS                    PLP10.8 D0-30S0-LOC/OB-V-EL-FS                                                                

PLP10.6,3 D0-02R8-LOB/OA-N                           PLP10.8 S0-02R8-LOC/OB-N-L                                                                     

PLM10.4 R0-81E1-LGC/GC-N-EL                         PLM10.5,8R0-81E1-LGC/GC-N-EL                                                                 

PLM10.4 R0-86S0-LGD/GD-N-EL                         PLM10.5R0-86S0-LGD/GD-N-EL                                                                   

PLP10.1.5R0-81E1-LGC/GC-N                            PLP10.3,15D0-30B1-LGD/GC-N-EL                                                                 

PLP10.4D0-30B1-LGD/GC-N-EL                          PLP10.6,3D0-30B1-LGD/GC-N-EL                                                                   

PLP10.1,5 D0-30B1-LGC/GC-N-EL                      PLP10.1,5 D0-30B1-LOB/OA-N-EL                                                                 

PLP10.1,5 S0-30B1-LOB/OA-N-EL                     PLP10.1 D0-86E7-LBB/BA-N-EL-FS                                                                

PLP10.1 D0-86E7-LBB/BA-N EL                        PLP10.1,5 D0-86E7-LBB/BA-N-EL-FS                                                              

PLP10.3,15 D0-86E7-LBB/BA-N EL                   PLP10.2,5 D0-86E7-LBB/BA-N-EL-FS                                                              

PLP10.5,8 D0-86E7-LBB/BA-N-EL-FS                 PLP10.2 D0-86E7-LBB/BA-N-EL-FS                                                                 

PLP10.3,15 D0-86E7-LBB/BA-N-EL-FS                PLP10.8 D0-86E7-LBB/BA-N-EL                                                                   

PLP10.8 S0-86E7-LBB/BA-N-EL                         PLP10.6,3 D0-86E7-LBB/BA-N-EL-FS                                                              

PLP10.2,5 D0-81E1-LBB/BA-F-EL                      PLP10.2,5 D0-81E1-LOB/OA-N                                                                    

PLP10.8 D0-81E1-LOC/OB-N-EL                        PLP10.1 D0-86E7-LGC/GC-N-EL-FS                                                                 

PLP10.2D0-86E7-LGC/GC-N-EL-FS                     PLP10.2S0-86E7-LGC/GC-N-EL-FS                                                                 

PLP10.3,15 D0-86E7-LGC/GC-N-EL-FS               PLP10.3,15 S0-86E7-LGC/GC-N-EL-FS                                                             

PLP10.4 D0-86E7-LGC/GC-N-EL-FS                   PLP10.5 D0-86E7-LGD/GD-N-EL-FS                                                                

PLP10.5 S0-86E7-LGD/GD-N-EL-FS                    PLP10.8 D0-86E7-LGD/GD-N-EL-FS                                                                 

PLP10.10 S0-86E7-LGD/GD-N-EL-FS                  PLP10.3,15D0-30S0-LOB/OA-V                                                                    

PLP10.1 D0-81E1-LBB/BA-N-EL-FS-SCP             PLP10.2 D0-81E1-LBB/BA-N-EL-FS-SCP                                                            

PLP10.3,15 D0-81E1-LBB/BA-N-EL FS SCP        PLP10.4 D0-81E1-LBB/BA-N-EL-FS-SCP                                                            

PLP10.5 D0-81E1-LBB/BA-N-EL-FS-SCP            PLP10.6,3D0-81E1-LBB/BA-N-EL-FS-SCP                                                            

PLP10.1,5D0-81E1-PGC/GC-N-EL                    PLP10.2,5 D0-81E1-PGC/GC-N-EL                                                                 

PLP10.6,3 S0-81E1-PGD/GD-V-L                     PLP10.5 S0-30S0-LBB/BA-N                                                                      

PLP10.1 D0-30S0-LOB/OA-N-EL FS                PLP10.1 S0-30S0-LOB/OA-N-EL FS                                                                

PLP10.2 D0-30S0-LOB/OA-N-EL FS                PLP10.2 S0-30S0-LOB/OA-N-EL FS                                                                 

PLP10.3,15D0-30S0-LOB/OA-N-EL FS             PLP10.3,15S0-30S0-LOB/OA-N-EL FS                                                              

PLP10.4 D0-30S0-LOB/OA-N-EL FS                PLP10.5 D0-30S0-LOB/OA-N-EL FS                                                                

PLP10.5 S0-30S0-LOB/OA-N-EL FS                 PLP10.6,3 D0-30S0-LOB/OA-N-EL FS                                                              

PLP10.8 D0-30S0-LOC/OB-N-EL-FS               PLP10.6,3 S0-30S0-LOB/OA-N-EL FS                                                              

PLP10.10 D0-30S0-LOC/OB-N-EL-FS             PLP10.8 S0-30S0-LOC/OB-N-EL-FS                                                                

PLP10.10 S0-30S0-LOC/OB-N-EL-FS             PLP10.1 D0-36R8-LOB/OA-N-L                                                                    

PLP10.2 D0-36R8-LOB/OA-N-L                    PLP10.3,15 D0-36R8-LOB/OA-N-L                                                                 

PLP10.4 D0-36R8-LOB/OA-N-L                     PLP10.5 D0-36R8-LOB/OA-N-L                                                                     

PLP10.4D0-36R8-LGD/GD-N-L                     PLP10.6,3 D0-36R8-LOB/OA-N-L                                                                  

PLP10.8 D0-36R8-LOC/OB-N-L                    PLP10.10 D0-36R8-LOC/OB-N-L                                                                   

PLP10.1 D0-29E8-LGC/GC-N-EL                  PLP10.2 D0-29E8-LGC/GC-N-EL                                                                   

PLP10.3,15 D0-29E8-LGC/GC-N-EL              PLP10.4 D0-29E8-LGC/GC-N-EL                                                                   

PLP10.5 D0-29E8-LGD/GD-N-EL                  PLP10.5 S0-29E8-LGD/GD-N-EL                                                                    

PLP10.6,3 D0-29E8-LGD/GD-N-EL               PLP10.1 R0-86E7-LGC/GC-N-EL                                                                   

PLP10.2 R0-86E7-LGC/GC-N-EL                  PLP10.3,15 R0-86E7-LGC/GC-N-EL                                                                

PLP10.4 R0-86E7-LGC/GC-N-EL                  PLP10.5 R0-86E7-LGD/GD-N-EL                                                                   

PLP10.6,3 R0-86E7-LGD/GD-N-EL               PLP10.8 R0-86E7-LGD/GD-N-EL                                                                    

PLP10.8 D0-86E7-LBB/BA-N-FS                  PLP10.2,5 D0-81**-LBB/BA-N-EL FS                                                              

PLP10.1 D0-81**-LBB/BA-N-EL FS             PLP10.2 D0-81**-LBB/BA-N-EL FS                                                                

PLP10.3,15 D0-81**-LBB/BA-N-EL FS        PLP10.3,15 S0-81**-LBB/BA-N-EL FS                                                             

PLP10.4 D0-81**-LBB/BA-N-EL FS            PLP10.5 D0-81**-LBB/BA-N-EL FS                                                                 

PLP10.5 S0-81**-LBB/BA-N-EL FS             PLP10.6,3 D0-81**-LBB/BA-N-EL FS                                                              

PLP10.8 D0-81**-LBB/BA-N-EL                 PLP10.10 D0-81**-LBB/BA-N-EL                                                                  

PLP10.1 D0-86E7-LGC/GC-N-FS                 PLP10.2 D0-86E7-LGC/GC-N-FS                                                                   

PLP10.3,15 D0-86E7-LGC/GC-N-FS            PLP10.4 D0-86E7-LGC/GC-N-FS                                                                    

PLP10.5 D0-86E7-LGD/GD-N-FS                PLP10.6,3 D0-86E7-LGD/GD-N-FS                                                                 

PLP10.2 D0-36R9-LOB/OA-N                      PLP10.3,15D0-36R9-LOB/OA-N                                                         

PLP10.3,15S0-36R9-LOB/OA-N                 PLP10.4 D0-36R9-LOB/OA-N                                                                      

PLP10.4 S0-36R9-LOB/OA-N                    PLP10.5 S0-36R9-LOC/OB-N                                                                       

PLP10.6,3D0-36R9-LOC/OB-N                  PLP10.6,3D0-36R9-LOB/OA-N                                                                     

PLP10.1 R0-91E1-LBB/BA-N                    PLP10.2 R0-91E1-LBB/BA-N-EL                                                                   

PLP10.3,15 R0-91E1-LBB/BA-N                PLP10.5 D0-86E7-LBB/BA-N-EL FS                                                                

PLP10.8 D0-86E7-LBB/BA-N-EL FS             PLP10.10 D0-86E7-LBB/BA-N-EL FS                                                                

PLP10.6,3 D0-81E1-LEA/EA-N-EL FS         PLP10.3,15 D0-81E1-LEA/EA-N-EL                                                                

PLP10.4 D0-81E1-LEA/EA-N-EL                PLP10.4 S0-81E1-LEA/EA-N-EL                                                                   

PLP10.6,3 D0-81E1-LEA/EA-N-EL             PLP10.6,3 S0-81E1-LEA/EA-N-EL                                                                 

PLP10.8 D0-81E1-LEA/EA-N-EL                PLP10.8 S0-81E1-LEA/EA-N-EL                                                                    

PLP10.10 D0-81E1-LEA/EA-N-EL              PLP10.2 S0-29E8-LGD/GC-N-EL                                                                   

PLP10.1 S0-29E8-LBB/BA-N-EL                PLP10.2 S0-29E8-LBB/BA-N-EL                                                                   

PLP10.3,15 D0-29E8-LBB/BA-N-EL          PLP10.3,15 S0-29E8-LBB/BA-N-EL                                                                

PLP10.4 S0-29E8-LBB/BA-N-EL               PLP10.5 D0-29E8-LBB/BA-N-EL                                                                   

PLP10.5 S0-29E8-LBB/BA-N-EL               PLP10.6,3 D0-29E8-LBB/BA-N-EL                                                                  

PLP10.6,3 S0-29E8-LBB/BA-N-EL             PLP10.4 S0-23K3-LOB/OB-V-EL                                                                   

PLP10.1 D0-30S0-LGC/GC-N-EL               PLP10.1 S0-30S0-LGC/GC-N-EL                                                                   

PLP10.2 D0-30S0-LGC/GC-N-EL               PLP10.2 S0-30S0-LGC/GC-N-EL                                                                   

PLP10.3,15D0-30S0-LGC/GC-N-EL            PLP10.3,15S0-30S0-LGC/GC-N-EL                                                                  

PLP10.4 D0-30S0-LGC/GC-N-EL               PLP10.5 D0-30S0-LGD/GD-N-EL                                                                   

PLP10.6,3 D0-30S0-LGD/GD-N-EL            PLP10.6,3 S0-30S0-LGD/GD-N-EL                                                                 

PLP10.8 D0-30S0-LGD/GD-N-EL               PLP10.10 D0-30S0-LGD/GD-N-EL                                                                  

PLP10.1 D0-81E1-LBB/BA-N-EL FS            PLP10.1 S0-81E1-LBB/BA-N-EL FS                                                                 

PLP10.2 D0-81E1-LBB/BA-N-EL FS           PLP10.2 S0-81E1-LBB/BA-N-EL FS                                                                

PLP10.3,15 D0-81E1-LBB/BA-N-EL FS       PLP10.3,15S0-81E1-LBB/BA-N-EL FS                                                              

PLP10.4 D0-81E1-LB

CASAPPA铸铁型同步马达分为二个系列，分别是HDD30和HDD35这两种，HDD30系列的同步马达有17、22、27、34、43、51、61、73、82这九种排量可选，HDD35的同步马达有50、63、71、80、90、100、112、125这八种排量可选，连续工作压力可达310BAR，最高工作压力可达335BAR，可以分十二路同步，同步精度小于2%，转速500，最高3000，可以适用各种不同的介质，如果矿物油，水乙二醇。广泛用于钢铁冶金。下面是一个标准17排量四联的同步马达：HDD30.17-MB+17-MB+C30.30-MD+17-MB+17-MB-N

CASAPPA铝合金系的同步马达分为二个系列,分别是PLD10系列与PLD20系列两种,PLD10系列的同步马达有2、3.15、4、5、6.3五种排量可选，PLD20系列有4、6.3、8、11.2、14、16、20、25、31.5九种排量可选，连续工作压力由200BAR至250BAR不等，可以分十二路，可以带或不带溢流阀，下面是一个标准一个三路25排量不带溢流阀的同步马达型号：PLD20/3/CS-GE/25-GD/25-GD/25-GD

如果几台马达或液压缸仅由一台泵来驱动而不采取任何手段来控制它们各自的流量的话 , 那么只有具有压力要求的马达或液压缸会开始其工作进程。具有较高压力要求的马达或液压缸只有在最初工作的单元完成其全部工作进程后才能启动。一般情况下我们不会希望获得这种工作模式。因此将总的泵出流量进行分流是完全必要的

采用结构较简单的齿轮式分流马达未获得高水准的同步精度 ;

在很大的流量范围内获得高水准的同步精度 ;

在各自回路具有不同负载的情况下获得高水准的同步精度 ;

只要液压回路设计合理 , 分流马达的应用是非常简单易行的 , 而且不需要添加任何新的元件。

同步误差

无论是齿轮式分流马达还是柱塞式分流马达 , 其同步误差主要取决于以下一些参数 :

介质油的粘度和温度 ;

负载的不均衡程度 ;

系统的压力水平 ;

总流量 ;

只有在得到以上各参数的具体数值后才有可能精确计算出系统的同步水平。

我公司的同步马达系列分流精度大致水准为1~3%

代理意大利凯斯帕CASAPPA S.p.A.齿轮泵 马达过滤器

产品系列：

铸铁体液压齿轮泵及马达
内置阀门的液压齿轮泵和马达

齿轮流量分配器
固定排量轴向柱塞泵和马达
变量轴向柱塞泵
液压手动泵
过滤器

铝合金壳体液压齿轮泵及马达

PUMPS KAPPA CASAPPA

Gear pumps made of cast iron in two pieces. KAPPA is available with mountig flanges and side or rear ports according to SAE and European standard. The rigidity of assembly ensure reliability and high volumetric efficiency also at high operating pressures.

Displacements: from 0.30 in³/rev (4,95 cm³/rev) to 4.50 in³/rev (73,82 cm³/rev) available in groups 20, 30.
Max. peak pressure up to 4800 psi (330 bar)
Max. speed up to 4000 min-1

Description: 

High operating pressure

High efficiency at high temperature

Low noise emission

Product Code

意大利凯斯帕Casappa BAP32.80SO-16ZOPGF/GE-N

Zoom Ứng Dung Bơm Thủy Lực CASAPPA trong xe máy công Trình Mã CASAPPA apply Giá Liên Hệ Lượt xem 9936 Ứng Dung Bơm Thủy Lực CASAPPA trong xe máy công Trình Đặt hàng: Quý khách có như cầu đặt hàng xin vui lòng gửi email cho công ty chúng tôi theo địa chỉ: thienminh-che@vnn.vn . Trong Email đề nghị quý khách mô tả chi tiết yêu cầu kỹ thuật của bơm: xuất xứ, nhãn hiệu, loại bơm, model, số series, part number, lưu lượng làm việc, áp lực làm việc,….. Nếu là bơm đang sử dụng thì nói rõ thêm bơm đang được dùng cho loại máy gì, sản xuất năm nào?,… Chúng tôi cần thông tin chi tiết vì nếu bơm quý khách đang cần không có sẳn hàng trong kho thì chúng tôi có thể tính toán tư vấn chọn loại bơm tương đương phù hợp nhu cầu của quý khách. Quý khách cũng nên nêu rõ thông tin về công ty quý khách: Tên, địa chỉ, tel, fax, mail, ngươi liên hệ,, bộ phận, …. Chúng tôi chỉ báo giá khi có đủ thông tin về khách hàng. Chi Tiết: Vui lòng Gọi 0909 214 264. Sản phẩm cùng loại Càng Gắp Ống Cống KANGTO Mỏ Gắp Phế Liệu Thủy Lực Mỏ Gắp Đá Thủy Lực KANGTO Mỏ Gắp Gổ Thủy Lực KANGTO

Quảng Cáo