自来水处理用 煤质颗粒活性炭 一吨起订
煤质颗粒活性炭简介
黑色颗粒状，有孔隙率发达、比表面积大、吸附力强、机械强度高、易反复再生、造价低等特点。广泛用于有毒气体净化、废气处理、工业和生活用水的净化处理、溶剂回收等方面，能经受高温、高压作用，不易破碎灰，使用寿命长等特点。
颗粒活性炭分为不定型颗粒活性炭、煤质颗粒活性炭，广泛应用于引用水，工业用水和废水深度净化；成本低，使用寿命长，易再生。
颗粒活性炭活性炭是一种多孔性的含炭物质,它具有高度发达的孔隙构造,是一种极优良的吸附剂,每克活性炭的吸附面积更相当于八个网球埸之多.而其吸附作用是藉由物理性吸附力与化学性吸附力达成.其組成物质除了炭元素外，尚含有少量的氢、氮、氧及灰份，其結构则为炭形成六环物堆积而成。由于六环炭的不规则排列，造成了活性炭多微孔体积及高表面积的特性。
煤质颗粒活性炭用途
1.水处理行业：自来水、工业用水、污水处理，纯净水、饮料、食品、医药用水
2.空气净化：除杂、除味，吸咐，除甲醛，苯、甲苯、二甲苯、油气等有害气体物质
3.工业:脱色，提纯,空气净化
4.养鱼:过滤
5.试剂：催化剂及催化剂载体
煤质颗粒活性炭分类介绍
脱硫用煤质颗粒活性炭，GB-7701．1-97
1、特性及用途：脱硫用煤质颗粒活性炭主要用于脱除煤气中硫化氢及其他硫化物；在加入适量的添加剂后，亦可用于脱除烟道气或天然气中的硫化氢及其他硫化物。
2、脱硫用煤质颗粒活性炭技术指标应符合下表要求：
孔容积，cm3/g ≥0.60
比表面积，m2/g≥800
饱和硫容量mg/g850~899
水分%≤5
强度%≥90
PH 8-10
穿透硫容量,mg/g实测
装填密度g/L 400~550
回收溶剂用煤质颗粒活性炭,GB7701．2-97
1、特性及用途：回收溶剂用煤质颗粒活性炭主要用于苯、甲苯、二甲苯、醚、乙醇、丙酮、汽油、三氯甲烷、四氯化碳等有机溶剂之回收。
2、回收溶剂用煤质颗粒活性炭技术指标应符合下表要求：
孔容积，cm3/g ≥0.65
比表面积，m2/g≥850
饱和硫容量mg/g850~899
四氯化炭吸附率≥70%
四氯化炭脱附率≥80%
着火点 ≥350
水分%≤5
强度%≥90
PH 8-10
穿透硫容量,mg/g实测
装填密度g/L 350-500
粒度mm
＞5.60≤5% 2.5~5.6≥79% 1.00~2.5≤15% ≤1.00 ≤1%
媒载体用煤质颗粒活性炭，GB7701．3-97
1、特性及用途：触媒载体用媒质颗粒活性炭主要用于合成工业中的触媒或触媒载体。
2、其技术指标应符合下表要求：
水容量 ≥75%
比表面积 ≥850m2/g
饱和硫容量 850~899mg/g
四氯化炭吸附率≥70%
四氯化炭脱附率≥80%
着火点 ≥350
水分%≤5
强度%≥90
PH 8-10
穿透硫容量,mg/g实测
装填密度g/L 400-600
粒度mm
＞6.3 mm≤5% 3.15~6.3≥79% 2.5~3.15≤15% ≤2.5 ≤1%
净化水用煤质颗粒活性炭，GB7701．4-97
1、特性及用途：净化水用媒质颗粒活性炭主要用于工业用水的脱氯、除油，以及污水的深度净化处理。
2、净化水用煤质颗粒活性炭技术指标应符合下表要求：
孔容积cm3/g ≥0.65
比表面积，m2/g≥900
漂浮录，%≤2
Ph 6~10
水分%≤5
灰分%≤10
强度%≥85
苯酚吸附值≥140mg/g
碘吸附值≥1050mg/g
装填密度380~500g/L
亚蓝吸附≥180mg/g
粒度%
＞2.5 mm≤2% 1.25~2.5 ≥83% 1.0~1.25 ≤14% ≤1.00 ≤1%
净化空气用煤质颗粒活性炭, GB7701.5-97
1、特性及用途净化空气用煤质活性炭主要用于脱除空气的污染物,以及用于气体的分离和提纯
2、其技术指标应符合下表要求：
孔容积，cm3/g≥0.55
比表面积，m2/g≥750
Ph值8~10
水分%≤5
强度%≥90
四氯化炭吸附率，%≥45
碘吸附值mg/g≥700
装填密度g/L450~600
粒度mm
＞6.3 ≤5%
3.15~6.3≥90
<3.15≤5%
防护用煤质颗粒活性炭，GB7701.6-97
1、特性及用途：防护用煤质颗粒活性炭主要用于装填各种工业防毒器具。
2、护用煤质颗粒活性炭技术指标应符合下表要求：
孔容积≥0.7cm3/g
比表面积≥930m2/g
Ph值6~10
水分≤5%
强度≥85%
对苯的防护时间≥50min
对氯乙烷的防护时间45~49min
装填密度430~530g/L
粒度mm
＞2.5 ≤2%
1.25~2.5~6.3≥87%
1.00~1.25 ≤10%
<1.00≤1%
高吸附用煤质颗粒活性炭
1、特性及用途：适用于吸附气相有害物质，液相有害物质，脱除各种有机蒸汽，滤除有害气体及空气中的臭味等用的煤质颗粒活性炭。
2、技术指标应符合下表要求
孔容积≥0.08cm3/g
比表面积≥950m2/g
Ph值6~10
焦糖脱色率%≥90
水分%≤5
强度%≥90
四氯化炭吸附率%≥80
碘吸附值mg/g≥1050
装填密度g/L300~480
粒度%￠1.5mm￠4mm
煤质颗粒活性炭的运输及储存
1、活性炭在运输过程中，防止与坚硬物质混状，不可踩、踏，以防炭粒破碎，影响质量。
2、储存应储存于多孔型吸附剂，所以在运输储存和使用过程中，都要绝对防止水浸，因水浸后，大量水充满活性空隙，使其失去作用。
3、防止焦油类物质在使用过程中，应禁止焦油类物质带入活性炭床，以免堵塞活性炭空隙，使其失去吸附作用。最好有除焦设备净化气体。
4、防火活性炭在储存或运输时，防止与火源直接接触，以防着火、活性炭再生时避免进氧并再生彻底，再生后必须用蒸汽冷却降至80℃以下，否则温度高，遇氧，活性炭自燃。
工厂简介
温县星月活性炭厂坚持开拓创新，精益求精，产销量逐年增长，成为国内活性炭行业的先进企业。为进一步提高活性炭产品的科技含量，增加产品的附加值，公司在保持活性炭工业销售市场稳定的基础上，进一步开拓活性炭产品的改良技术。坚持“质量第一信誉第一服务第一”以“优质产品优惠价格真诚合作”的宗旨为国内外客户服务。产品主要有果壳活性炭、椰壳活性炭、杏壳活性炭、煤质活性炭、木质活性炭等、粉状活性炭、柱状活性炭、水烟炭、机制木炭、炭雕等产品。主要用于纯净水、酒业、化工、工业、电力、医药、食品、饮料的净化，黄金及贵重金属的提取，石油化工脱色提纯，废水处理及空气净化等领域，产品销售覆盖全国十几个省市自治区，并远销至欧洲及东南亚各国。温县星月活性炭厂的诚信、实力和产品质量获得业界的认可。
活性炭销售服务
活性炭售前服务
根据客户需要耐心同客户沟通，反复询问确定客户需要产品用途，并根据用途推荐最合适的产品，做到物美价廉。
活性炭售中服务
从产品的选料、加工、包装现场跟进，并在生产后给与检验，并出具检验报告。发货时确认货物后发货，并时刻跟踪货物去向，直到客户手中。
活性炭售后服务
产品到达目的地时，让客户验货，对于产品部合格的，及时换货。对于产品使用方法不明了由技术进行现场指导。
联系方式
厂名称：温县星月活性炭厂
工厂地址：河南省焦作温县番田镇前杨垒村
联系人：李花蕾
手 机：18768857326
电 话：13323869815
Q Q ：1295230430
邮 箱：1295230430@qq.com
网址：http://xyt666666.cn.alibaba.com
英文翻译
Introduction to the coal particle activated carbon
Black granule, have developed porosity, large specific surface area, strong adsorption capacity, high mechanical strength, easy to repeated regeneration, low cost, etc. Widely used in toxic gas purification, gas processing, industrial and domestic water purification treatment, solvent recovery and so on, can endure high temperature and high pressure, not easy broken, long service life, etc.
Granular activated carbon can be pided into amorphous granular activated carbon, granular activated carbon, coal is widely used in drinking water, industrial water and waste water depth purification; Low cost, long service life, easy regeneration.
Granular activated carbon activated carbon containing carbon is a porous material, it has a highly developed pore structure, is an extremely good adsorbent, per gram of activated carbon adsorption area equivalent to eight tennis more mins. And the adsorption is by physical adsorption and chemical adsorption force. The material in addition to carbon element, it contains a small amount of hydrogen, nitrogen, oxygen and ash, its structure is carbon formed six ring up. Due to the irregular arrangement, six ring carbon over activated carbon pore volume and high surface area.
Detailed application:
1. The water treatment industry, tap water, industrial water, sewage treatment, pure water, beverage, food, medicine and water
2. Air purification: except miscellaneous, in addition to flavor, adsorption, in addition to formaldehyde, benzene, toluene, xylene, harmful gases such as hydrocarbon substances
3. Industry: decolorization, purification, air purification
4. Fish farming: filter
5. Reagents, catalysts and catalyst support
Classification of coal particle activated carbon is introduced
Desulfurization in coal granular activated carbon, GB - 7701.1-97
1, the characteristics and USES: desulfurization in coal granular activated carbon is mainly used for removal of hydrogen sulphide in the gas and other sulfide; After adding suitable amount of additives, can be used for removing the hydrogen sulfide and other sulfide in flue gas or natural gas.
2, the desulfurization in coal granular activated carbon specifications should comply with the requirements listed in the table below:
Pore volume, cm3 / g 0.60 or higher
Specific surface area, 800 m2 / g p
Saturation sulfur capacity/g850 ~ 899 mg
Moisture % 5 or less
The strength of the % 90 or higher
PH 8-10
Penetrates the sulfur capacity, measured mg/g
Packing density of 400 ~ 550 g/L
Recovered solvents with a coal activated carbon particles, GB7701.2-97
1, the characteristics and USES: recovered solvents used coal granular activated carbon is mainly used for benzene, toluene, xylene, ether, ethanol, acetone, petrol, chloroform, carbon tetrachloride and other organic solvent recycling.
2, recovered solvents used coal granular activated carbon specifications should comply with the requirements listed in the table below:
Pore volume, cm3 / g 0.65 or higher
Specific surface area, 850 m2 / g p
Saturation sulfur capacity/g850 ~ 899 mg
Carbon tetrachloride adsorption rate of 70% or higher
Carbon tetrachloride stripping rate of 80% or higher
Ignition 350 or higher
Moisture % 5 or less
The strength of the % 90 or higher
PH 8-10
Penetrates the sulfur capacity, measured mg/g
Packing density 350-500 g/L
Particle size in mm
> 5.60 5% 2.5 ~ 5.6 or greater or less 79% 15% or less of 1.00 ~ 2.5 1.00 or less 1% or less
Medium carrier with a coal activated carbon particles, GB7701.3-97
1, the characteristics and USES: catalyst carrier with medium granular activated carbon is mainly used for catalyst or catalyst carrier in synthetic industry.
2, its technical indicators should comply with the requirements listed in the table below:
Water capacity is 75% or higher
Than the surface area of 850 m2 / g or more
Saturation sulfur capacity of 850 ~ 899 mg/g
Carbon tetrachloride adsorption rate of 70% or higher
Carbon tetrachloride stripping rate of 80% or higher
Ignition 350 or higher
Moisture % 5 or less
The strength of the % 90 or higher
PH 8-10
Penetrates the sulfur capacity, measured mg/g
Packing density 400-600 g/L
Particle size in mm
3.15 ~ 6.3 > 6.3 mm or less 5% 79% 15% or less of 2.5 ~ 3.15 or higher or less 2.5 1% or less
Purifying water by coal granular activated carbon, GB7701.4-97
1, the characteristic and application: water purification with medium granular activated carbon is mainly used for dechlorination of industrial water, oil removal, and the depth of the sewage purification treatment.
2, water purification with coal granular activated carbon technology indexes should comply with the requirements listed in the table below:
0.65 cm3 / g p hole volume
Specific surface area, 900 m2 / g p
Floating, % 2 or less
Ph 6 ~ 10
Moisture % 5 or less
Ash % 10 or less
The strength of the % 85 or higher
Phenol adsorption or 140 mg/g
The iodine adsorption value or 1050 mg/g
Packing density of 380 ~ 500 g/L
The blue adsorption or 180 mg/g
The granularity of %
1.25 ~ 2.5 > 2.5 mm or less 2% 83% 14% or less of 1.0 ~ 1.25 or higher or less 1.00 1% or less
Purify air with a coal activated carbon particles, GB7701.5-97
1, the characteristics and USES purify air with coal activated carbon is mainly used for removal of air pollutants, and used for the separation and purification of the gas
2, its technical indicators should comply with the requirements listed in the table below:
Pore volume, cm3 / g 0.55 or higher
Specific surface area, 750 m2 / g p
Ph 8 ~ 10
Moisture % 5 or less
The strength of the % 90 or higher
Carbon tetrachloride adsorption rate, the % p 45
The iodine adsorption value of mg/g, 700 or more
G/loading density L450 ~ 600
Particle size in mm
> 6.3 5% or less
3.15 ~ 6.3 p. 90
< 3.15 5% or less
Protection with a coal activated carbon particles, GB7701.6-97
1, the characteristics and USES: protective coal granular activated carbon is mainly used for filling all kinds of industrial gas appliances.
2, with coal granular activated carbon technology indexes should comply with the requirements listed in the table below:
Acuity 0.7 cm3 / g hole volume
Than the surface area of 930 m2 / g or more
Ph 6 ~ 10
Moisture content of 5% or less
Intensity of 85% or higher
Protection of benzene time 50 min or more
The ethyl chloride protective time 45 ~ 49 min
Packing density of 430 ~ 530 g/L
Particle size in mm
> 2.5 2% or less
1.25 ~ 2.5 ~ 2.5 87% or higher
1.00 ~ 1.25 10% or less
< 1.00 1% or less
High adsorption with coal granular activated carbon
1, characteristics and USES: applicable to the gas phase adsorption harmful material, liquid and harmful material, various organic vapor removal, filter out harmful gases and odor in the air with the coal particle activated carbon.
2, technical indexes should comply with the requirements listed in the table below
Acuity 0.08 cm3 / g hole volume
Than the surface area of 950 m2 / g or more
Ph 6 ~ 10
Caramel decolorizing rate % p 90
Moisture % 5 or less
The strength of the % 90 or higher
Carbon tetrachloride adsorption rate % p 80
The iodine adsorption value of mg/g, 1050 or more
G/loading density L300 ~ 480
￠granularity %￠1.5 mm4 mm
Coal activated carbon particles to the transportation and storage:
1, the activated carbon in the process of transportation, prevent and hard material mix, do not step on, step, in case of carbon grain breakage and influence the quality.
2, storage should be stored in multiple pass adsorbent, so in the process of transportation storage and use, will absolutely prevent water immersion, due to flooding, the water is full of activity space, so that it is not work.
3, prevent tar material in use process, should be banned from tar class material to the activated carbon bed, lest jam activated carbon, lose its adsorption. It is better for in addition to the coke gas purification equipment.
4, activated charcoal fire prevention during storage or transportation, prevent direct contact with fire, in case of fire, activated carbon regeneration into oxygen and recycled thoroughly, avoid when must steam regeneration after cooling down to under 80℃, otherwise the temperature is high, meet oxygen, activated carbon combustion.
Manufactory profile
County and activated carbon factory adhere to innovation, excellence, volume has increased year by year, as domestic activated carbon industry advanced enterprises. To activate carbon products, in order to further improve the technology content, increase the added value of products, the company in keeping the activated carbon industry sales market stability, on the basis of the further development of activated carbon products improved technology. Adhere to the "quality first credit first service first" to the tenet of "sincerely cooperate with high quality products, preferential price" to serve customers at home and abroad. Main products include nut shell activated carbon, coconut shell activated carbon, apricot shell activated carbon, coal activated carbon, wood activated carbon, powdered activated carbon, cylindrical activated carbon, hookah charcoal, mechanism charcoal, charcoal carving, etc. Is mainly used for pure water, alcohol, chemical, industrial, power, pharmaceutical, food, beverage purification, gold and precious metals extraction, petrochemicals decoloring purification, waste water treatment and air purification and other fields, product sales across the country a dozen provinces and autonomous regions, and exported to Europe and southeast Asian countries. County and activated carbon plant integrity, strength and product quality obtain industry acceptance.
Activated carbon sales and service
Activated carbon pre-sale service
According to the customer need patience to communicate with customers, product use repeatedly asked to determine the requirement of the clients, and to recommend the most suitable products according to utility, do good and inexpensive.
Activated carbon sale service
From the material of the product, processing, packing up, and gives the inspection after production, and issue inspection report. Confirm the delivery of the goods after delivery, and tracking the goods, until customer's hands.
Activated carbon after sales service
Product arrived at the destination, let the customer inspection, qualified for products pision, timely exchange. For the product method of use is unknown by the technology on-site guidance.
Contact way
The factory name: county and activated carbon plant
Factory address: jiaozuo in henan county tian town before Yang lei village
Contacts: LiuKaiTian
Hand machine: 18768857326
Telephone: 13323869815
Q Q: 1295230430
Mail box: 1295230430 @qq.com < mailto:1295230430@qq.com >
Url: < http://xyt666666.cn.alibaba.com >
产品展示
联系方式：
厂名称：温县星月活性炭厂
工厂地址：河南省焦作温县番田镇前杨垒村
联系人：李花蕾
电话：13323869815
手机：18768857326
QQ ：1295230430
邮箱：1295230430@qq.com
网址：http://xyt666666.cn.alibaba.com
