AD Series Mini-Pneumatic/Inverter/Servo driven beam robots
AD系列轻型横走机械手(单截式)
AD系列轻型横走式机械手主要适用于50-200吨卧式射出成型机的成品或水口取出,上下手臂有单截式和双截式两种,横行驱动方式可采用气压驱动、变频马达驱动和AC伺服马达驱动,适合于两板及三板模.可提升产能(20%-30%)、降低产品不良率、节约人工、精确控制产量及保障操作人员的安全性。
AD Series Small beam robot is mainly suitable for 50-200 ton horizontal injection molding machine for finished product and runner removed from the mold , up and down arms with cut-and-two-sectional, stalking can be used pneumatic driven, inverter motor driven and AC servo motor driving, suitable for two and three platen molds. may improve productivity (20%-30%), lower product defective rates and save the output of manpower, precise control and protection of the operator's safety.
■横行可采用进口无杆缸、变频马达或AC伺服马达驱动,配合两组进口高刚性精密线性滑轨,运行平稳,噪音低,磨擦系数低,经久耐用;
■手臂采用单截式进口的高刚性精密线性滑轨上下结构,可选配双截式手臂,特殊的皮带倍速结构设计,只需一半的行程即可达到全行程大幅度缩短上下手臂的结构高度,提高上下行的速度及稳定性,并可配合厂房高度低的场所.
■自动检测报警安全保护,如气压不足或突发故障会自动报警,并自动弹出防落气缸,保证机械手臂和模具的安全;
■可选购CE机型,符合EUROMAP/SPI的标准及配置标准接口。
■Transverse can be used imported NON-Rod cylinder, inverter motor or AC servo motor driving, plus two sets of imported high rigid precision linear Rails,stable running,low noise,lower friction coefficient, durable;
■Stop using single-arm-importation of high rigid precision linear Rails and bottom structure,optional two-sectional-arm, special belt speed structure design, you only need half of the stroke to reach up and down the whole itinerary significantly shortened arm height of structure, improve the speed and top and bottom line, and be compatible with the stability of the plant height low places.
■Auto-detection of security, such as the pressure is insufficient or unexpected failure will automatically alarm and automatic ejection prevention into cylinder, guarantee the mechanical arm and mold safety;
■Optional CE models that conform to the standard EUROMAP/SPI and configure standard interfaces.
General Specification
一般规格
Main Specification
主要规格
( )表示选购规格，“P”表示成品臂，“R”表示料头臂
机型表示：单截式为“I”，双截式为“W”，成品臂+料头臂为“D”，成品臂为“S”
“M”为变频马达，“Y”为AC伺服马达。
)Denoted option spec.:“P”: product arm“R”: runner arm
Model denoted: I: single stage“W”: telescopic type“D”: product arm+ runner arm
“S”: product arm“M”: traverse axle driven by inverter motor
“Y”: traverse axle driven by AC servo motor
