太阳能充电器规格

太阳能充电器使用说明书

前言

感谢您使用本公司产品，本产品是一款多功能太阳能应急充电器，内置高容量可充电聚合物锂电池，铝合金外壳设计，携带方便，环保节能，使用安全。

太阳能充电

当太阳能充电器置于光源下，光伏电池板即自动将光源转换为电能进行蓄电工作。光源的强弱变化，相应的太阳能充电的效率也会不同，对此我们只需将太阳能放置于强光的位置即可，SOLAR指示灯亮，表示正在进行蓄电工作，通过百分比指示灯，可以看到本机的容量。

太阳能充电器输入功能

当我们需要出差、旅行、夜行或者是野外作业时，我们带上太阳能充电器，他将在我们需要的时候对我们的电子设备进行应急充电，以及夜间照明，非常适用、重要。

我们可以使用以下的方法给太阳能充电器进行快速充电：

1. 我们可以选择其他方法快速对本产品进行充电。首先，我们可以使用本产品自带的电源适配器进行充电，将电源适配器插入家用或者办公电源插座（110V~240V）再用附件USB线连接至本产品，将本产品拨动开关至IN位置，即可进行快速充电，充电时USB指示灯亮。当充电完成后，太阳能充电器将自动关闭电路，此时，拔去连接线即可。
2. 本产品也支持USB充电，使用附件中的USB一端连接至电脑或者带有USB端口的设备，再将MINI USB的一端连接至本产品，将本产品的开关拨动至IN位置，即可进行快速充电。当充电完成后，电量指示灯显示100%，太阳能充电器将自动关闭电路，此时，拔去连接线即可。

注：本产品在初次使用时，请在使用前对本产品进行两次以上的长时间完全充电、放电，以提高太阳能充电器内置电池的使用效率及寿命。

太阳能充电器输出功能

LD360(S600)太阳能充电器附带的转接头可支持大部分手机、苹果iPhone4、mp3/mp4、数码相机、游戏机，PDA、GPS、PSP、IPAD、DV，LED台灯、小风扇等电子产品充电和使用。如何正确的给我们的手机或者是其他电子设备充电呢？

首先，我们使用前要仔细的查看手机产品的适配充电器规格或者或明书，确定额定充电电压（大部分为5.5 V）确认后，将功能拨动开关调至OUT位置，（在10秒钟内没有连接充电设备，本充电器会自动断电，需重新拨动开关击活）再用USB连接线连接至手机，我们那就能在手机屏幕上看到正在充电的状态，充电的同时，我们一样可以正常的使用手机。

LED照明灯功能

当我们夜间出行或者是停电时，我们可以使用太阳能充电器LED照明功能，使用非常简单，将功能拨动开关调至LED位置即可，高亮度远视距LED照明灯，可超长照明达300多小时，握在手上如同手电筒一般方便，适合夜间及应急使用。

注意事项

1. 当用电源适配器对太阳能充电器充电时，将功能开关调至IN位置。
2. 不要用尖锐物体刮擦太阳能电池板的表面。
3. 产品放置时将光伏电池板朝上置于阳光下或者强光直射处，随时保持充电状态。
4. 请将本产品置于干燥处保存，注意防潮。
5. 如发现本产品启动电路保护不能正常工作时，请拔出连接线，将开关调至IN位置，用电源适配器充电或太阳光下充电击活之后即可继续使用。

太阳能充电器规格

Thanks for using our product.

This product is a multi-function solar
charger for emergency situation, which has built-in High-capacity rechargeable lithium
polymer battery. It’s an aluminum alloy appearance design, extremely portable
to carry, also energy-saving and environment friendly, very safe to use.

Solar charging

When put the solar charger under the light,
the photovoltaic solar panel will automatically convert the light into
electrical energy for reserving energy. As to the different solar charging efficiency
is caused by corresponding different intensity of light, what we need to do is
just place the product under the light, and the solar indicators will be
working, that means the product is on working status, also we can judge the
battery capacity by check the indicator’s status, it will tell us the statues
of the product’s battery capacity.

The solar charger’s input function

When you on a business trip, have a tour,
travel at night or working in fields, it will be a good choice for us to bring
this solar charger; it can be used to recharge our electronics when necessary,
whatever for emergency power or flashlight.

That is very useful and important; but,
when we need the charger be filled with full capacity within a short time, or
it cannot meet our time schedule because it’s too long recharging time. How can
we manager that?

1. Fast charging with the product’s
   power adapter:

First, plug the power into the outlet (generally 100V-240V)
at your home or office, and connect it into the charger with USB cable, then
adjust the switch to the position “in” is OK. When charging finished the
charger will power off and shut the currency automatically, just pull the cable
out and finished the charge.

1. The charger also apply to the
   USB devices, for the fast charging, we just connect the end of the USB cable
   into the computer or other devices with a USB port, and then connect the other
   end of the USB cable into the charger, and adjust the switch to the position “in”.
   When charging finished the charger will power off and shut the currency automatically,
   just pull the cable out and finished the charge.

Remark: in order to improve the efficiency of the built-in battery
and prolong the lifetime, Please make a long charging & discharging tome at
least twice.

Solar charger’s output function

Our products and the matched adaptors
(include in package) can applied to almost all kinds of cell phones over the
market; and it is very easy to use.

Also, our product design with
auto-protection function for managing the power, so it is very safe to be used.

And then how much more safely charge our
cell phones and other electronics with the solar charger?

1. First of all, please carefully
   check the manual or the power specification of the cell phone or other
   electronics before we charge it. And then confirm the rated charging voltage
   and current (generally 5 V1000ma), after the confirming, please adjust the
   charger’s output voltage to the position of 5.5 V, and adjust the function
   switch to “out”, then connect cell phone and the charger with USB cable, you
   may be check the cell phone if it is in charging statues. And of cause, you are
   able to use your cell phone as normal.
2. As to other electronics, just
   follow the above stapes.
3. The solar charger will
   automatically shut down after the charge is finished, then pull out the cable.

LED flashlight function

When we travel at night or came across a
blackout, it’s a good option for us to make full use of the LED function of the
solar charger. It is very easy to be operated, just adjust the switch to the
position of LED is OK. And then this Far-horizon & high-brightness LED
lighting will last more than 30 hours. It can be carried easily like a small
torch, very convenient to use at night or emergency. As usual, just adjust the
switch button on “IN” when you don’t use it.

Notice

1. Do not use the sharp objects
   scratching the surface of the photovoltaic panel.
2. In order to maintain it on
   recharging states at any time, please make the photovoltaic panel upward to the
   sunlight or direct light when placing the product.
3. Please do use the original
   power adaptor for charging, and do not use other different power adaptors.
4. Please place the charger under
   dry environment.
5. When the short-circuit
   protection happened, and the charger has already stop working normally, please
   pull the cable out, the charger will automatically restored in 10 seconds, and
   it is ok to be used again.

Specification