朋友还在为开车时手机不知如何放置而烦恼吗，
还在因为手机看电视需拿在手上而苦恼嘛，
还在因为手机当导航时不方便查看而郁闷吗，
等等。。。。。。。。
神奇的手机车载支架将一一为你解决！


自粘手机支架、手机通用支架、车载手机支架、手机架、手机座
 
【品名】自粘手机支架
【型号】xct-004
【颜色】黑色、绿色
【样式】多种固定方式，可旋转的百变车载支架
【材质】优质高强度塑料
【固定方式】挡风玻璃、出风口、平台3种固定方式
【适合机型】7-11寸 平板电脑 数码产品等
【产品组成】主体、靠枕背夹、数据线、吸盘底座(可以粘贴在仪表板上)      
【包装】彩盒包装
中文说明：
产品特点：
 
FM参数：发射频率：７６ＭＨＺ－１０８ＭＨＺ全波段
　　　　　立体声信噪比：６５ＤＢ
　　　　　自动音频输入传感：６０Ｓ没有音频输入自动FM关断。
　　　　　超低功耗：7MA
蓝牙参数：
【蓝牙参数 频率】：2.402-2.4835GHZ
【蓝牙参数 最大传输功率】：2级,4DBM
【蓝牙参数 接收灵敏度】：85DBM
【蓝牙参数 传送范围】：10M
【蓝牙参数 数椐传输率】：115200BPS
【蓝牙参数 操作功耗】：＜26MA
【蓝牙参数 睡眠状态】：＜1MA
按键功能：
S1---CH-/VOL- 按一下向下调ＦＭ波段，长按音量减
S2---暂停/播放 按一下蓝牙控制终端暂停，按一下播放。
S3　 CH+/VOL+　按一下向上调ＦＭ波段，长按音量加
 
 
ＬＥＤ工作指示：（这个软件可以修改状态指示的）一般情况是蓝牙启动的时候 红灯闪烁亮，进配对的时候红灯，蓝灯交替闪烁。播放音乐的时候可以让红灯常亮，也可以闪烁的，这个时候蓝灯不亮的。
充电时红灯长亮，充饱后红亮熄灭
蓝牙版本：Ｖ２.１
蓝牙接收距离：１０Ｍ
ＦＭ发射距离：１０Ｍ　
支架供电方式：内置高性能锂电池　８００ＭＡＨ
充电时间：约２个小时
可工作时间：约１５个小时
待机时间：　约８０0个小时
工作温度：-5-85.C
 
 
ＬＥＤ工作指示：蓝牙启动的时候 红灯闪烁亮，进行配对的时候红灯及蓝灯交替闪烁，配对成功红灯闪烁亮，播放音乐的时候红灯闪烁亮。 
充电时红灯长亮，充饱后红灯熄灭。
 
供电：
立体声蓝牙接收器采用两种供电模式:
１　电源适配器供电（标准适配器，输出５Ｖ　５００mA USB MINI接口）
２　内置高性能聚合物电池（800mA），ＰＣＢ板上有对电池设置充电保护，可以边充电边工作。（充电时红灯常亮，充饱电后红灯熄灭）
开关机：
将电源开关拨到ＯＮ，开机状态，红灯亮，蓝灯闪。
将电源开关拨到ＯＦＦ，关机状态，灯熄灭。
配对与连接：
１将接收器开机，开机后自动进行对码状态，红灯及蓝灯交替闪。
２启动手持设备的蓝牙功能，搜索蓝牙设备。
３选择蓝牙设备（以ＳＭＡＲＴ　ＢＬＵＥＴＯＯＴＨ为例，选择此设备）
４输入密码（００００）配对并对机器授权。
５配对成功，红灯闪烁亮。
产品参考
蓝牙协议：Bluetooth Ver.2.1
功率标准：Class 2
通讯距离：10M
频宽：2.4GHZ(2.402-2.483.5MHZ)
发射灵敏度：约2dBm
接收灵敏度：-85dBm
音频输出接口：3.5mm音频接口
ＭＩＣ距离：约１Ｍ左右
DAC信噪比：98dB
LED指示：电源/对码/充电
连续使用时间：５小时
工作电流：35-55mA
充电时间：约2小时(在第一次使用前请先充电)
外型尺寸：62*28*13ＭＭ
工作温度范围：-10-50度 
工作湿度范围：10-90%
Car Bluetooth FM transmitter adapter bracket
Product Model: H-BF18
Product Certification: ROHS, CE, FCC, BQB
Product Description:
Currently, Tablet PC is hot-selling, especially for the Apple IPAD. Other companies also followed this trend to launch a wide range of Tablet PCs for getting profit from market.


Listening to music can release the tension and also has a supporting role in improving traffic safety during the driving. Radio is set up with the vehicle standard in all kinds of car stereo radio and it is the most common one.


Installing a bracket (H-BF18) in the car can help fix different kinds of 7-10.1 inch Tablet PCs or IPADs in car when you want to enjoy music by the stand itself. Bluetooth FM transmitter can connect to a car stereo system via wireless adapter; Realizing the function of car sound system to play music; Embodies the perfect acoustics of your car and experience the beautiful music spin rate; It can also lead your route if you need GPS navigation function by connecting to car audio system through the Bluetooth FM transmitter function of bracket to make the voice navigation.
 
Therefore, the Car Bluetooth FM transmitter adapter bracket greatly enhance the car's audio function and make it easy to access a variety of Bluetooth-enabled devices to enjoy more comfortable and safer driving.


Usages and steps:
1. Adjust the height and width of the bracket, completely fasten the different size of tablets. Different width can be adjusted by pulling the four parts of icon "1" in order to achieve getting the tablet fixed; Pull icon "2" can freely adjust for different height up and down .When you get the height you want , then press "2" to lock it;
2. Open the power switch "3", indicator light "4" and digital screen "5" will light up. Bluetooth FM transmitter function will start normally;
3. Open the Bluetooth function of the Tablet or IPAD product searching and matching Bluetooth successfully and connected
A. Turn on H-BF18, it will be in a code matching status automatically. Red light and blur light flashes alternatively
B. Active Bluetooth functions of tablet pc or ipad and start searching Bluetooth device.
C. Choose Bluetooth device (take SMART BLUETOOTH as an example, choose this device)
D. Input PIN code: "0000" and authorizes the machine.
E. When it says“Connected”，pairing successfully. Red light is on.


4. Adjust the switch button "S1" and "S3" to reach the corresponding FM Frequency (FM Frequency: 87.50MHZ-108.00MHZ full-wave band, try to get a FM frequency as far away as possible from the point of normal playback frequency) in order to achieve connecting with the car FM radio frequency. Press "S2" the product will be in normal service condition, and then play the beautiful music
5 Use the lock button "9" to make the fastener mounted on the headrest, then match supporting adapter "10" with locking-up frame "11" position , then successfully get the whole set installed.
6. Adjust the Plum knob "12" in bracket, you can get the different point of view, in order to achieve the different angle of viewing to watch the contents on play.
7. Turn off:  Slide power switch to OFF, it will be in off status. Indicator light"4"will go off and FM transmission function will stop, too.
8. Charging: Using standard adapter, output 5V 1000mA USB MINI interface to connect product and charge it (built-in high-performance polymer battery800mA). Charging time is around 2 hours. Red light is on when charging，after fully charged the red light is off.


Product main parameters:
1.Bluetooth parameters:
【frequency】:2.402-2 .480 GHZ
【Maximum transmission】: grade 2, 4DBM
【Receiver sensitivity】: 85DBM
【Transmission range】: 10M
【Transmission rate】: 115200BPS
【Operating power consumption】: <55MA
【sleep state】: <10MA


2. FM transmitter parameter
【FM transmitter frequency】:87.50-108.00MHZ full-wave band
【Stereo signal-to-noise ratio】: 65DB
【Transmission range】: 10M
【Operating power consumption】: <7mA
【The input transducer】: Automatic audio input sensor, FM will turn off automatically if no any audio input within 60 seconds


3 .Charging time: about 2 hours.
4. Continuing operation period: about 15 hours
5. Stand-by time: about 800 hours
6. Working temperature range: -5~85 degree
7. Working humidity range: 10-90%
8. Key function:
S1---(CH-) Press and adjust the FM wave band downward. Long press to changing channels quickly
S2---(Pause/Play) Press to pause Bluetooth control terminal. Then press to start again.
S3---(CH+) Press and adjust the FM wave band upward. Long press to changing channels quickly
9. LED Work instructions:
The red light flashes after Bluetooth activated; the red and blue light flashes alternately when pairing; red light flashes after pairing successfully; the red light flashes when playing music; red light is on when charging; the red light is off after fully charged
10. Power supply:
a. Power adapter charging（Standard adapter ，Output 5V 1000mA USB MINI interface）
b.By built-in high-performance polymer battery(800mA). PCB board has set up the battery charging protection that makes it can work while charging. (Red light is on when charging，after fully charged the red light is off)


 
Quality and after-sales service
Warranty: 1 year