立式单刀切胶机，主要用于切割天然橡胶、合成橡胶及其它塑性材料，尤其适合于安装在接近炼胶机处，用于切割小块橡胶。

单刀切胶机主要有切胶刀、机架、工作油缸、底座、辅助工作台及液压系统、电气系统等部分组成，切胶刀下面的底座上装有尼龙垫板，以保护切胶刀的刀刃。切生胶时，用热工将胶料放在切胶刀的下方，然后按下启动按钮，则切胶刀在活塞杆的带动下沿机架上的滑道落下将切胶料切开。机架上装有上下两个限位开关，以控制换向阀改变切胶刀的运动方向，同时，也可保护活塞缸缸盖

This machine is mainly used to cut the natural rubber,synthetic rubber and other plastic materials,especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.

This rubber cutter mainly consists of cutting knife,frame,cylinder,base,auxiliary table,sydraulic system and electric system.The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife.When cutting the raw rubber,put the raw rubber under the cutting knife,the press the start button,the knife can cut the rubber.Two limited switches are installed on the frame to control the reversal valve to change the movement direction of the knife,at the same time,it protects the cover of the cylinder.

技术参数Technical Parameters