DZX2-32N RangeMiniatureCircuitBreaker
一、用途 APPLICATION
DZX2-32N系列 小 型 断 路 器 适 用 于 交 流50Hz， 额 定 电 压 至220V,额 定 电 流
32A及以下的单相线路中，对电路的过载和短路进行保护。
DZX2-32Nrangeminiaturecircuit-breakeraresuitableforcircuitofAC
50Hz,ratedvoltageup to 220V, rated current up to 32A. They are mainly used in singe-pole lighting distribution system for overload and short circuit protection.
二、结构特点 STRUCTURE FEATUR
■产品体积小，重量轻，分断能力高，宽度仅18mm，有一个保护极和一个可开闭
中性极。
The breakers have the following characteristics: compact size, light weight, high breaking capacity，wideonly 18mm ,it have a protection pole and a open-close neutrality pole.
■产品符合IEC60898-1，GB10963.1等标准。
The products comply with the demands of the following standards: IEC60898-1、GB10963.1.
三、型号及其含义 TYPE AND MEANS
四、技术参数、工作条件及安装条件
WORKINGANDINSTALLATIONCONDITION
△环境温度：-5℃～+40℃，且在24小时内的平均温度不超过+35℃；
Ambienttemperature:-5℃～+40℃,theaveragehours of temperature not exceeding +35℃during24 hours.
△海拔高度：不超过2000ｍ； Elevation: ≤2000m
△环境条件：应无会引起爆炸危险的介质，也无腐蚀和破坏绝缘的有害气体和导 电尘埃；
Environmentcondition:Theremustbe not any explosive medium and there must be not any gas which would corrode metal or any conducting dust which would destroy the insulation.
△冲击和振动：应安装和使用在无明显冲击和振动的地方；
Impactand Vibration: products should be used in no significant impact and vibration place.
△安装类别：III；Installingcategories:ClassⅢ
△安装条件：采用35mm的标准卡轨安装，安装面与垂直面的倾斜度不大于5度。 Installing condition: mounted by 35mm standard rail track. The tilt gradient between installation face and vertical face should ≤5°
