气体净化脱硫活性炭 承德活性炭
脱硫活性炭简介：
脱硫活性炭是一种含硫材料制成的外观呈黑色、无味、无毒，内部孔隙结构发达。比表面积大，吸附能力强的一类微晶质碳素材料，是一种常用的吸附剂。 活性炭按外观形状分为：粉状、颗粒状、不规则颗粒状、圆柱形、球型和纤维状等。脱硫活性炭指的是在汽油精制过程中，利用活性炭负载磺化钛氰钴，对原油中超标硫醇进行脱除，从而减少汽油含硫量，提高品质。符合国家环保排放的要求。
脱硫活性炭特点：
① 比表面积大、吸附值高。作为装载磺化钛氰钴的活性炭，要求亚甲蓝吸附值要高，中孔发达，负载量超过普通活性炭。
② 强度好，不易碎。由于负载磺化钛氰钴活性炭，要在固定床中反复接受压力考验，溶液浸泡，所以要求强度要高，颗粒最好是自然形状。
③ 灰份杂质含量少。为了确保催化剂顺利进行化学反应，要尽量减少炭中灰份，金属离子等各种杂质含量。提高活性炭孔隙利用率。
④ 水分低。尽可能保持活性炭最低水分，避免影响其功能发挥。
脱硫活性炭理化指标：
型号 | 粒度 | 碘值 mg/g | 四氯化碳 % | 灰份 % | 堆积重 g/L | 强度 % | 水份 % |
HXT-4.0(A) | Ф4.0 | ≥900 | ≥55 | 6-12 | ≥400 | ≥95 | ≤5 |
HXT-4.0(B) | Ф4.0 | ≥1050 | ≥70 | 8-12 | ≥380 | ≥90 | ≤5 |
HXT-4.0(C) | Ф4.0 | ≥1100 | ≥80 | 8-15 | ≥360 | ≥90 | ≤5 |
HXT 8x16 | 8x16 | >1000 | ≥60 | 8-12 | ≥400 | ≥95 | ≤5 |
HXT 4x10 | 4x10 | >1050 | ≥70 | 8-15 | ≥380 | ≥90 | ≤5 |
脱硫活性炭按生产原料可分为：
活性炭脱硫剂有两种:一种是用于粗脱硫的普通活性炭脱硫剂,还有一种是用于精脱硫的改性活性炭脱硫剂.前者常以煤为原料,以焦油为胶粘剂挤条成型后经炭化处理,再用水蒸气活化,经筛分后制成.后者常选用已成型的活性炭,用活性炭金属盐容液等浸渍后,再经干燥、焙烧和过筛后制得.如在活性炭上涂渍上乙醇胺等可以使活性炭得以改性,能脱除大部分的有机硫醚.
脱硫活性炭用途：
广泛用于冶金、载银、电镀、轻工、石化、食品、医药、印染、味精、油脂脱色、溶剂回收、催化剂载体、空气净化、水处理、三聚氰氨、糖用、液相用、清塔、吸油、各种精脱硫等。对气体与液体的除臭、除毒、脱色有很好的效果。
脱硫活性炭规格：1.5mm 3.0mm 4.0mm 6.0mm 8.0mm 10.0mm其它规格可随用户需求调节。
脱硫活性炭包装：
小包：25公斤装，大包：吨袋。塑料编织袋外加内衬，产品应存放在室内干燥处。
联系方式：
平泉县鸿德活性炭厂
地址：河北承德平泉县杨树岭镇双庙村
联系人：陈曦
电话：15933675139
座机：0314-6030803
传真：0314-6030803
QQ：1840227310
邮箱：1840227310@
网址：
产品图片：
Desulphurization activated carbon description:
Desulphurization activated carbon is a kind of sulfur the appearance of the material in black, tasteless, non-toxic, internal pore structure are developed. Is greater than surface area, strong adsorption ability of micro crystalline carbon material, is a kind of commonly used adsorbent. ording to appearance shape can be pided into: activated carbon powder, granule and irregular granular, cylindrical, spherical, and fibrous, etc. Desulphurization activated carbon is in the process of refined gasoline, using activated carbon load sulfonated cobalt, titanium cyanide for crude oil in overweight mercaptan removal, thus reducing the gasoline sulfur content, improve the quality. In line with the requirements of state environment protection.
The desulfurization characteristics of activated carbon:
(1) large specific surface area, high adsorption. As activated carbon loading of sulfonated cobalt titanium cyanogen, methylene blue adsorption value is higher, the hole developed, load more than the normal active carbon. (2) good strength, not easy broken. Due to load sulfonated cobalt titanium with activated carbon, to ept the pressure test again and again in the fixed bed, solution soaked, so demand higher intensity, particle preferably natural shape. (3) ash less impurity content. Chemical reactions to ensure that the catalyst smoothly carries on, try to minimize carbon in ash, metal ion and other impurities. Raise the utilization ratio of the activated carbon pore. 4. Low moisture content. As far as possible keep minimum water activated carbon, avoid affecting its function.
Physical and chemical indicators: desulphurization activated carbon
Carbon tetrachloride model granularity iodine value mg/g % % ash umulation intensity of the g/L % moisture %
Ф HXT - 4.0 (A) 4.0 p 900 55 or more 6-12, 400, 95 or 5 or less or more
Ф HXT - 4.0 (B) 4.0 1050 or 70 or more 8-12, 380, 90 or 5 or less or more
Ф HXT - 4.0 (C) 4.0 1100 or 80 or more 8-15, 360, 90 or 5 or less or more
HXT 8 x16 x16 > 1000 or 60 8-12, 400, 95 or 5 or less or more
HXT 4 x10 4 x10 8 > 1050 or 70-15, 380, 90 or 5 or less or more
Desulphurization activated carbon in raw material can be pided into:
Activated carbon desulfurizer has two kinds: one kind is used for coarse desulfurization of activated carbon desulfurization agent, there is a kind of modified activated carbon desulfurization agent is used for fine desulfurization. The former often using coal as raw materials, article for tar adhesive squeeze molding after carbonization processing, again by steam activation, after screening. The latter often choose has formed activated carbon, activated carbon metal salt fluid after impregnation, after drying, roasting and sieving system. Such as ethanol amine on the coating on the active carbon can make the activated carbon was modified, and can be removal most of the organic sulfur ether.
Desulphurization activated carbon use:
, plating, silver is widely used in metallurgy, light industry, petrochemical, food, medicine, printing and dyeing, MSG, oil decolorization, solvent recovery, catalyst carrier, air purification, water treatment, melamine, sugar, liquid phase and qing, oil absorption, all kinds of fine desulfurization tower, etc. Of gas and liquid deodorization, except the poison, decoloring have very good effect.
Desulphurization activated carbon specifications: 1.5 mm to 3.0 mm to 4.0 mm to 6.0 mm to 8.0 mm to 10.0 mm to other specifications can be regulated with user's needs.
Desulphurization activated carbon packing:
Package: 25 kg pack, bag, ton bag. Plastic woven bag with liner, the product should be stored in a dry indoor place.
联系方式：
平泉县鸿德活性炭厂
地址：河北承德平泉县杨树岭镇双庙村
联系人：陈曦
电话：15933675139
座机：0314-6030803
传真：0314-6030803
QQ：1840227310
邮箱：1840227310@
网址：
