一
1. 光纤专用激光切割头，内置高精度高度传感器，自适应板材不平整。内置保护镜片，保护光学镜片长时间稳定
使用。
Specifically for optical fiber laser cutting head, internal installed high precision height sensor which can make
the laser cutting head adapt plate unevenness. Also it installed protection glass which can protect the optical
glass to be used long time.
2. 磁悬浮直线电机驱动，速度达350m/min，加速度达3g，无任何机械磨损；全闭环控制，运转精度高。
Maglev linear motor drive, the speed can reach 350m/min and the acceleration can reach 3g.No mechanical
wear. Full-loop control. High running accuracy.
3. 光纤激光器，无需工作气体，运行成本低；光电转换效率25％，低能耗；可连续切割铝、黄铜等高反射有色金
属材料；配有全封闭防辐射罩壳，确保人员安全。
The machine uses fiber laser which need no gas. The operating cost is low; Photoelectric conversion
efficiency is 25%, with low energy consumption; Continuous cutting high reflection metal such as aluminum,
brass; It is equipped with fully enclosed radiation-proof cover to guarantee the personal security.
二
1. LCF系列数控激光切割机是济南铸造锻压机械研究所有限公司在三十多年来开发数控激光切割机基础上最新开发研制的具有国际
先进水平的新一代激光切割系统，该产品采用目前国际流行的飞行光路切割系统，自动调焦，恒光路高速运动定位加最佳控制方
式使生产效率达到最高。激光器与数控系统一体化集成设计，内部通过光纤通讯，激光的功率大小及启停均能与伺服运动完美匹
配。
LCF-1530 CNC Laser Cutting Machine is new generation of our laser series, with the modern laser flying-optic cutting system,
automatic focusing high-speed motion position and the optimum controlling mode. LCF mode adopted the new technology
based on approx 30 years researching experience. These features make a big step in increasing productivity. Integrated design
of laser generator and CNC system. Inside communication is via fiber optic. The power volume and start & stop of laser can
perfectly match the servo motion.
2.采用世界著名的
FANUC公司、
FAGOR公司高档激
光加工专用数控系
统，机床运动与激光
输出完美匹配，内置
完整的激光加工工艺
库，无需人工调整。
激光器的开关、保养、报警、工作状态实时显示及控
制，并具备RS－232、RJ－45网络、USB等通讯接
口，使程序、参数的传输更加灵活方便。
World famous special CNC system is from FANUC
or FAGOR. The action of machine perfectly match
the output of laser. Integrated processing technology
library doesn't need any manual adjustment, RS-232,
RJ-45 network and USB allow communication with
computer.
CNC的高速控制与激光器的功率输出响应性得到飞跃提高，避免边角过烧现象的发生。
The great improvement of responsiveness between CNC high-speed control and
output power avoid overburning of the edge.
