中文介绍：我公司生产的橡塑发泡保温材料系引进国外最新技术及工艺，采用自动化生产线，以性能优异的丁晴橡胶、聚氯乙烯为主要原料，经密炼、硫化发泡等特殊工艺制成，适用温度范围广，自-40℃至105℃且抗老化性能好，经久耐用。阻燃效果达到国家B1级标准。
其主要特点为：
低密度，密闭式气泡结构，导热系数低
水汽透过率极低，吸水率低
阻燃性好，抗老化性能优
富柔软性施工方便。
环保性能
绿色环保：不产生废气，废水，废渣，烟火等污染物，完全符合ISO14000 国际环保认证要求
应用领域
基于上述特性本品被广泛中央空调冷冻机房、建筑、船舶、车辆等行业的各类水汽管道的保温、隔热。并获得了理想的使用效果。由于本材料的柔软、耐屈绕等特点，可加工制作健身器材、医疗器械、日用品的把套、扩套。
使用说明
安装简易快捷
本品材质柔软，施工安装方便。对于管道的安装，可随管道及安装进度套上后一起安装，也可以将管材剖开后，再用专业胶水粘合而成。对于阀门、弯头、三通等复杂形状，将板材及管材按实际要求切割，再依据不同形状选型包上，粘合即可。由此可确保整个系统的气密性且外形美观。
基本操作规程
建议使用我公司生产的“绿都”牌橡塑专用胶水及胶带。
所有的割隙接头都需用胶水粘接密封。
粘接时先了解管道规格，由大到小，先弯头、三通、后管道、再阀门法兰。
粘接胶水适量、材料接口应轻微挤压。
保温厚度大，需要叠保温的情况下每层的割口相互错开。
安装时切勿拉伸材料，应适当余出10mm 详询华美格瑞玻璃棉 英文介绍：
Foam rubber insulation materials produced by our company is the introduction of foreign technology and process, the use of automated production line, with Ding Qing rubber, polyvinyl chloride excellent performance as the main raw material, made by a special process mixing, foaming, wide applicable temperature range, from -40 ℃ to 105 ℃ and anti-aging performance is good, durable. Flame retardant effect reached thenational standard B1.
Its main features:
Low density, the closed-cell foam structure, low coefficient of heat conductivity
Water vapor transmission rate is extremely low, low water absorption rate
Good fire resistance, anti-aging performance
Rich softness and convenient construction.
Environmental performance
Green environmental protection: does not produce waste gas, waste water, waste residue, smoke and other pollutants, in full compliance with international ISO14000 environmental protection certification requirements
Field of application
Based on the characteristics of the product are widely central air conditioning refrigerating plant room,building, ships, vehicles and various industries such as steam pipeline insulation, thermal insulation. And obtained the ideal use effect. Because the material is soft, anti-bending characteristics, processing production fitness equipment, medical equipment, daily necessities of the jacket, jacket.
Instructions for use
Easy installation fast
This product is made of soft material, convenient construction and installation. For the installation of pipelines, pipeline installation schedule with and installed after assembling, can also be pipe open, thenprofessional glue bonding. For the valve, elbow, three links and other complex shape, the plate and pipeaccording to the actual requirements of cutting, and then according to the different shape selection of packages, adhesion to. This ensures that the entire system of air tightness and beautiful.
The basic operation rules
Recommend the use of my company production of "green" brand special rubber glue and adhesive tape.
Seal cutting joint all need glue adhesive.
When bonding first understand the pipe size, from small to big, the first elbow, three, after the pipeline,and then the valve flange.
The amount of adhesive glue, material interface should be slight squeeze.
Insulation thickness, need to cut stagger each stacked insulation condition.
When installed do not stretch material, should be more than 10mm in detail and green glass wool
