光纤检测笔 optical fiber test pointer
红色激光器, 操作简单, 携带方便。可用来对 光纤,光缆,光纤连接器做可视测试, 当被测光纤有一个断点, 沿光纤传播的激光将在断点显示红光,可判定断点位置。单模, 多模均可用此方法。
光纤检测笔,是光纤现场施工及维护人员的必备检测工具之一。
| 光纤检测笔 型号:FT650P | 光纤检测小手电 型号:FT650H |
输出波长(nm) 功率(mW) | 650±10nm,1-20mW | 650±10nm,20-40mW |
调制 | 2Hz / CW | |
安全级别 | CLASSⅢA ; CLASSⅢb ; | |
电源 | 2节,7号干电池 | 2节,5号干电池 |
光纤类别 | 单模/多模(SM/MM) | |
测试接口 | 2.5mm通用接口(FC/SC/ST), 可选购FC2.5毫米转LC1.25毫米 转接头 | |
检测距离 | 1 Km ~20 Km | 20 Km ~40 Km |
外壳材料 | 铜 | 铝 |
产品使用寿命(h) | >3000h | |
工作温度 | -10℃~+50℃ | |
贮存温度 | -20℃~+70℃ | |
产品重量(g) | 60g(不含电池) | 80g(不含电池) |
工作湿度 | <90% | |
尺寸(mm) | φ14mm* L161 mm | Φ23.5mm* L180 mm |
产品功能:
光纤断裂、弯曲等故障定位,
OTDR盲区内故障检查
端到端光纤识别,
机械接续点优化
产品应用:
电信、广电CATV工程与维护,综合布线施工与维护
光器件生产与研究,其他光纤工程
日常维护:
1.仪表使用完毕后,请及时切断电源,盖上光纤接头保护盖,并置于通风干燥处。
2.长期不使用时请取出电池,以免电池腐烂。
3.经常清洁光纤连接器保持光路干净。
4.每年校准一次,以确保测量精度。
5.请勿自行拆卸设备,这可能导致永久性损坏并失去保修资格。
GV-10(1)
日常维护:
1.产品使用后,请及时取出电池,盖上光纤接头保护盖,并置于通风干燥处。
2.长期不使用时请取出电池,以免电池腐烂。
3.经常清洁光纤连接器保持光路干净。
4.请勿自行拆卸设备,影响保修。
laser pointer for fiber test
The laser pointer for fiber test series, well-production, are for long-distance optical fiber fault test, it can be used for long distance,with high quality and long using life, test tools for engineers and outside operation workers.
| Laser pointer for fiber test FT650P | Handheld laser for fiber test FT650H |
Wavelength /(nm) power (mW) | 650±10nm,1-20mW | 650±10nm,20-40mW |
Frequency | 2Hz / CW | |
Laser class | CLASSⅢA ; CLASSⅢb ; | |
power source | 2 pieces of AAA battery | 2 pieces of AA battery |
Fiber mode | SM / MM | |
Optical Connector | 2.5mm FC, SC, ST general interface , we sell FC2.5mmto LC1.25mmadapter | |
Using distance | 1 Km ~20 Km | 20 Km ~40 Km |
Material of shell | Bronze | Aluminum |
Laser diode lifetime(h) | >3000h | |
Operating temperature | -10℃~+50℃ | |
Storage humidity | -20℃~+70℃ | |
Weight (g) | 60g( without batteries ) | 80g( without batteries ) |
Operating humidity | <90% | |
Dimension (mm) | φ14mm* L161 mm | Φ23.5mm* L180 mm |
Features:
650nm LD laser source, Operating mode: CW and MOD
2.5mmFC, SC, ST general interface
higher power output, Long inspection distance
Rechargeable battery
Convenient for use and carry
Function:
1) Positioning the fiber breaking point, such as fracture and bend.
2) Inspection in OTDR blind zone
3) Fiber recognition from head face to end face
4) Mechanical transition point optimization
Application:
1) Optical communication,CATV project
2) PDS construction and maintenance
3) Optical component manufacture and research
4) fiber project production