成型工艺
开卷→整平→夹送、冲孔→成型→定尺、切断→收料
设备结构概述：
本生产线可生产电缆桥架，不同规格通过更换冲模完成，辊弯机采用组合可调式，一套轧辊完成所有规格桥架产品，规格变化通过调整成型机开挡和轧辊完成。
设备性能
1, 可根据生产需要轧制个带钢宽度100mm≤§≤860mm多种规格的电缆桥架。
2, 在线冲孔时生产速度：2.5～5米/分钟。
3, 成型设备连续成型速度时：10～15米/分钟。
4, 板材料厚：1-2.5mm。
5, 材质要求：低炭钢、镀锌带钢卷。
6, 生产线分自动和手动两种操作方式，可实现联动和分段运转作业。
设备主要组成
全套设备由开卷机、ML-900整平机、伺服送料装置、JF21-200B冲床、冲模、导向机架、成型主机、定尺切断、收料台和电器控制等部件组成。
Production processing
Decoiler---flatting---feeding & punchine---forming---cut-to-length---collection table.
Equipment struction introduction.
This production line may produce the cable tray, the different sizes through the replace punching moulds to complete. Forming machine is combined and adjustable, one set of combined rollers complete all cable tray products, the change size through adjust distance of rollers to complete.
Equipment capacity
1, The production line can produce many sizes of cable tray according to producing requirement.(material steel width100mm≤§≤860mm)
2, Line speed:2.5-5M/min
3, Continuous forming speed:10-15M/min
4, Steel thickness:1-2.5mm
5 , Material : Mild steel 、galvanized steel coil
6, The production line pide into two operations: automatic &handle. It can work with linkage and subsection.
Equipment structure
The whole equipment consists of decoiler, ML-900 flatting device, servo feeding, JF21-200B punching, punching dies, guider, forming machine, cut-to-length device, collection table and electrical control.etc
