【供应对焊机(图)台湾式碰焊机】价格_厂家

供应对焊机(图)台湾式碰焊机

1台起批

￥16500.00

点此议价

东莞市金航祥机械厂

东莞市寮步镇上底工业区上中路QQ：1004618863

全部商品

查看联系方式

产品属性

图文详情

品牌推荐

品牌/型号

金鸿翔/50KVA

采用IC数码控制箱控制，进口晶闸管分解电流。让你为所欲为，电流控制到最理想状态。采用进口硅钢料。可焊接∮10 10mm以下铁线。\

2. 采用气动杠杆式加压
具备更大夹紧力, 确保在工件顶锻焊接时不打滑，焊接性能更稳定；
顶锻移动滑座采用双导轨导向，精度高、耐磨性好、运动顺畅平稳，确保工件对焊接口的一致性。
3. 成型好
电阻对焊工艺简单，焊件的缩短量小、毛刺少，有利于简化后道工序。
4. 用途广泛
适用于低碳钢、纯铜、黄铜、不锈钢、铝等金属的线材或直径小于18mm的棒材的对焊。

Performance characteristic
Performance characteristic
1. K-Ⅱ series controller
Welding process can be realized on the clamp, welding, upset, maintenance, rest, and other parameters of conditioning control, the equipment is simple, easy grasp.
2. use of pneumatic lever-type pressurized
Have greater clamping force to ensure that the workpiece upset welding is not slippery, welding of a more stable;
Top mobile sliding on ing a dual track-oriented, high precision, wear resistance, and smooth movement smooth, welded interface to ensure the consistency of the workpiece.
3. Forming a good
Resistance welding process is simple, welding pieces of the small amount of shortening, less burr, is conducive to simplified procedures.
4. extensive use
Applicable to low-carbon steel, copper, brass, stainless steel, aluminum and other metal wire or the diameter of less than 18 mm in the welding rod.

Technical parameters:
	JE-35	JE-50	JE-75	JE-100
Input supply Input Power	380V±15%, 1-Ph, 50/60 Hz
Input supply Input Power	380V±15%, 1-Ph, 50/60 Hz
Rated output capacity Max short circuit current	35KVA / 25%	50KVA / 25%	75KVA / 25%	100KVA / 25%
Rated output capacity Max short circuit current	35KVA / 25%	50KVA / 25%	75KVA / 25%	100KVA / 25%
The largest short-circuit currentRated Input Current	15000A	19000A	23500A	26000A
The greatest pressure Max pressure	3900 N	3900 N	6100 N	6100 N
Top of the greatest ax upsetting force	1500 N	1500 N	2500 N	2500 N
Weight	180Kg	280Kg	350Kg	380Kg
Dimension H x W x D (mm)	1000500700	1000500700	10007001000	10007001000