第五代FFC成型設備（OMC－F5）在第三代（OMC－F3）的基礎上對機械結構、電氣程式進行了完善，對機電配件進行了優化（基本全部采用日本等進口配件）。此設備具有生產穩定，速度快，產品精度高，損耗低，操作舒適，調試方便等特點，生產模式靈活可變，外形美觀協調，操作介面更人性化，附加的安全功能可以更好地保護設備及操作人員。
OMC－F5產品精度數據如下：
間距P(相鄰兩條導體中心線之間的距離) +/- 0.04
邊距M(最外部一條導體中心線到排線邊緣之間的距離) +/- 0.04
總間距TP(最外部兩條導體中心線之間的距離) +/- 0.04
總寬度W(排線兩邊緣之間的距離) +/- 0.05
總長度TL(排線兩端的距離) +/- 0.4
補強板飄移TM(補強板貼合位置前后動的距離) +/- 0.4
*以上數據在如下條件下測得：L型態，43u絕緣層，導體0.035x0.3鍍錫，間距0.5，80PIN，長度150mm，速度2.5m/min，良品率95%以上.
The 5th generation FFC forming equipment (OMC-F5) is an updated product basing on the 3th generation (OMC-F3) with improvement in mechanical structure & electrical procedure, and optimization in electro-mechanical parts & essories (e.g. mostly using the parts imported from Japan). As a result, the new equipment has some outstanding characters as:
l Stable running, high speed,high precision of outputand low loss
l Easy operation and convenientdebugging
l Flexible production model
l Friendly user menu
l Extra safety functions available to better protect the equipment as well as operator
Belowaredata of output precision from OMC-F5:
l Pitch (P) : extent of space between the centerlines of two neighboring conductors +/-0.04
l Margin (M): extent of space from centerline of outermost conductor to edge of flat cable +/-0.04
l Total Pitch (TP): extent of space between the centerlines of two outermost conductors +/-0.04
l Total Width (TW): extent of space between the two edges of flat cable +/-0.05
l Total Length (TL) : extent of space between the two ends of flat cable +/-0.4
l Total Migration (TM): extent of forward & backward migration of reinforcing tape’s attaching position +/-0.4
*The above data are obtained under the conditions below:
- Pattern: L
- Insulation : 43u
- Conductor: 0.035x0.3 tinning
- Pitch: 0.5
- Pins: 80
- Length: 150mm
- Speed: 2.5m/min
Yield rate: above 95%
