NILE利莱 RH型低速度铆钉锤器 RH-80
* 低速强击.
* 噪音小，无损伤.
* 请不要空转打进
* 使用完后请排放出箱内的空气。
?
- 使轴针、套管、轴帽、油封等的打进作业合理化及标准化.
- It is especially useful when assembling engines.
|
RH20 |  |
RH80 |
RH100Z | |
Standard rivet snap |
- Single blow type: Strikes once each time the lever is pressed.
Main unit:RH20, RH80, RH90, RH100ZandRH200 - Continuous blow type: Strikes essively when the lever is pressed.
Main unit:RH60( continuous blow version ofRH20)
To carry out a single blow operation, release the lever for each strike.
*The striking power is reduced slightly from the second strike. - It is also possible to perform marking, riveting, chipping and drilling jobs by speparetelly ordering a rivet snap.
|
| 型号 | 总长
(mm) | 重量
(g) | 握把尺寸
(Diameter=mm) | 空气消费量
(cm3/stroke) | 空气压力
(Mpa) | 敲击能量
(kgf/m) | 行程
(mm) |
| RH20 | 213 | 900 | 37 | 220 | 0.5-0.7 | 0.23 | 12 |
| RH60 | 294 | 1400 | 45 | 180 | 0.5-0.7 | 0.23 | 12 |
| RH80 | 254 | 1300 | 45 | 650 | 0.5-0.7 | 0.32 | 12 |
| RH90 | 328 | 1600 | 43 | 1200 | 0.5-0.7 | 0.60 | 18 |
| RH100Z | 330 | 2100 | 43 | 1500 | 0.5-0.7 | 0.90 | 18 |
| RH200 | 341 | 2100 | 51 | 2500 | 0.5-0.7 | 1.30 | 18 |
