Feasa LED寿命测试仪加速了LED从-65°C到125°C的测试和检验。用于测试的光纤已经经过了很专业的挑选，可以在-65°C to +125°C的温度下进行使用。Fease光学头材料也是经过精挑细选的，使其能够承受极限温度。当寿命测试仪在进行运行时，测试仪置于烤箱外面对LED进行连续检测。

Feasa's LED Life Tester offers elerated testing and monitoring of LEDs from -65°C to +125°C.The Fiber used in the tester has been specially selected and prepared for use in temperatures of -65°C to +125°C. The Feasa Optical Heads have been designed from selected materials to withstand extreme temperatures. The Tester sits outside the oven and the LEDs are monitored continuously during the Life Time Test.

INTERFACES接口:

提供一个简单方便的USB接口到测试仪，不需要额外的外部供电，波特率高达460800。

USBoffers a very simple interface to the LED Analyser with no requirement for an additional power supply. Very high baud rates, up to 460800 baud, are available.

RS232接口易用于最大波特率为115200，需要一外部电源供电。

TheRS232 Serial Portis easy to use with a max baud rate of 115200. It requires the use of an external power supply.

多个LED测试仪可以使用Daisy Chain接口串联，而只需使用一个USB或者RS232接口连接到电脑，最多可支持30个LED测试仪串联。

Multiple LED Analysers can be connected together using the Daisy Chain Connectors. Only one RS232 Serial Port or USB Port is required to connect up to 30 LED Analysers.

TEST SOFTWARE测试软件：

测试软件能在固定的时间间隔内连续不断的对LED进行测试，在1秒和数小时之内的数据能及时存到硬盘，以备以后查看报告和绘制图形。

The Test Software has the ability to continuously test LEDs at fixed time intervals. Between 1 second and multiple hours data can be saved to disk for later retrival, reporting and graphing of results.

 测试软件可以配置发送邮件，当测试出现错误和测试结束时发送一封邮件。

The Test Software can be configured to send an email on error and also at the end of a test sequence.

SPECIFICATIONS参数：

Model and Type型号：