BURNS 100 TIMES LONGER THAN NORMAL TORCHES
100,000 + HOURS OF LED LIFE
(NO NEED TO REPLACE LED AGAIN).
300+ HOURS OF PLEASANT LIGHT
WITH RECHARGEABLE FUNCTION.
POWERED BY 33 PCS OF ULTRABRIGHT MULTIPLE
CHIP LED WHICH ACTS AS LED TORCH LIGHT
ALSO POWERED BY ADJUSTABLE SLIDING
GLASS COVER WHICH MAKES IT WORK AS
EMERGENCY LIGHT & ALSO AS NORMAL TORCH.
INCREASED DISCHARGE TIME DUE TO TRIPPLE
FUNCTION MODE.
STRONG ABS BODY.
WATER RESISTANT AND SHOCK PROOF.
USING HIGH CAPACITY 4V 1200MAH SEALED LEAD ACID BATTERY, MORE PRACTICAL THAN ALKALINE BETTERY.
MORE ENVIRONMENT FRIENDLY.
1.“OFF” is in the middle of the handle. When pushing the ON/OFF button upwards till it touches the upper end, 5LED is lighting; pushing the ON/OFF button further downwards, the 28LED burns; pushing the ON/OFF button further downwards till it touches the lower end, the 33LED all is bright.
2.To change the focus light so as to make it work as a torch, please push the adjustable glass cover upwards till it touches the upper end. To change focus of the light so as to make it work as normal emergency light, please push the adjustable glass cover downwards till it touches the lower end. Please note that the focus of the light can be changed from torch to emergency light in all the 3 modes mentioned above.
3.To charge the torch light, just open the plastic cover at the base of the torch light & unwind the charging wire. Plug the 220 V pin in any standard AC outlet which in turn will charge the LED torch light.
4.There is a small indicator near the brightness control knob, indicating the status of the charge. Once fully charged unplug the wire from the AC outlet and wind it again and place it under the base of LED torch light with plastic cover on top.
5.Avoid looking directly into the Led’s as it has a strong beam.
6.Charge the torch light only in OFF position or else it may damage the LEDs.
比传统电筒寿命长一百倍。
十万小时以上的LED寿命（无须更换LED）。
三百小时以上的照明时间。
可充电功能。
LED电筒带33个高亮度的LED灯。
还带有可调节的聚光灯板，作为应急灯使用，也可作普通电筒。
三种功能模式。
ABS外壳。
防水，防震。
使用内置高容量4V 1200mAH铅酸蓄电池，比使用碱性电池更实用。
更环保。
1.手把上开关的中间位置是“关”。当往最前位置推动开关时，5个LED灯亮了；往后推动两个档位时，28个LED灯亮了；继续再往后推动一个档位至最后位置时，33个LED灯全部亮了。
2.要转换成电筒使用时，请推动可移动的聚光灯板到最上面的尽头。要转换成应急灯使用时，请推动可移动的聚光灯板到最下方尽头。请注意灯的聚光可以由电筒与应急灯之间相互转换更改，如上所述三种模式。
3.给电筒充电时，只要打开电筒底部的塑料盖子，取出电源线。插在标准AC 220V的插座上，就能给电筒充电了。
4.在亮度控制按钮旁边有个小指示灯，标识着充电的状态。当电筒充满电时，拔出插头，把电源线再缠绕起来，放进底部，并盖上盖子。
5.请避免直视电筒，因为光源非常强。
6.充电时请保持电筒在关闭状态，否则会损坏LED。
东莞市康照电器科技有限公司，专门从事插卡音箱，插卡播放器，LED产品等电子产品的研制﹑开发与生产。公司下设产品研发中心﹑市场开发中心等多个专业部门，同时拥有多个配套零件生产工厂。
公司以“质量求生存，创新求发展”为宗旨，注重集约经营和“成本概念”,产品从设计开发到生产﹑印刷﹑包装均自行配套完成，从而大大降低生产成本，提高生产效率和产品质量，也因而赢得了客户，赢得了市场。近年来，公司生产规模不断扩大，经营理念不断更新，产品以“高质量﹑低价位”远销东南亚﹑非洲﹑中东欧美等国家和地区。
进入21世纪，公司加大科技投入﹑提高品牌意识，斥资建设生产基地﹑引进先进设备和人才，完善内部专业机构和质量检测体系，为赢得客户﹑占领市场打下坚实的基础。
