5200系列管夹阀
产品特点:
结构材料:
红阀5200系列控制阀具有在精确控制和免维护前提下的最好的耐麿性。高承载能力的管夹机构使套管可以在很宽的流量范围内实现精确控制。阀门没有密封填料需要维护、没有阀座磨损,橡胶套管的使用,省去了昂贵的合金阀体。
4”以上的阀门,用一个下管夹杆预夹套管使之成D型流道,从而减小阀门的行程。D型流道对控制信号反应更用时,而且没有流通能力损失。
锥形套管可用于进一步强化控制性能,并达到想要的准确Cv值。通过气动定位器和阀杆的直接联接可实现实时反馈定位,所以定位器输出不会间断。红阀5200系列控制阀的实时反馈定位的优点是:能将反馈信号的微小变化传送到定位器上,从而使阀门实际位置产生相应的变化,极大地提高了控制精确度。

5200 series pipe clamp valve
Features:
l Air cylinder drive
l No filler
l Locator directly connected, real-time position feedback
l Switch if long life
l Repeatable control
l A variety of casing rubber material selection
l Bidirectional zero leakage close
l External stroke adjustment
Structural material:
Ductile iron body
Actuator: ATO/ATC
ATO/FC, ATC/FO
Casing---natural rubber, chlorine butyl rubber, EPDM, viton
Flange drilling according to ANSI B16.5 Class 150
The red valve 5200 series controlling valve is of the best abrasion resistant in the premise of precise control and free maintenance. The pipe clamp mechanism of high load carrying capacity could ensure the casing pipe realize the precise control in a wide range of flow. There is no seal filler in valve that is needed to maintain, there is no seat wear and the use of rubber casing pipe, so it eliminates the need for expensive alloy body.
The valve that is bigger than4”is made to be D-type runner by using a down pipe clamp bar that is pre jacketed, therefore, it reduces the valve stroke. D-type runner takes more reaction time to controlling signal, and there is no loss of flow capacity.
The tapered sleeve can be used to further strengthen the controlling performance, and achieve the needed Cv value. By direct connection between pneumatic positioned and valve stem, it can realize real time feedback position, so the locator output will be uninterrupted. The advantages of the red valve 5200 series of real time feedback controlling valve is: it can transmit the slight change of feedback signal to locator, so that the valve actual position changes correspondingly, greatly improve the controlling accuracy.