INTRODUCTION
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Our series of HDMI converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.
TheYT-TXRX60M-CAT6Extenderuse one cat-6 cables up to 60 meters instead of HDMI cable to transmit high definition signal, for cutting down cost. Long distance transmission of high definition signal is very difficult because HDMI cable is very expensive. The Extender is designed to supply for long distance transmission of high definition signal.
Our devices offers solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
FEATURES
lSupport HDMI 1.3 protocol，Support 3D
lHDCP 1.2 protocol compliant
lSupport video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
lSignal transmission: Single cat-6 cable up to 50 meters is connected between TX and RX of the Extender. The HDMI cable length between the source and the TX or the Sink and the RX will be up to 5-15m. The cat cable length and the HDMI cable length add most up to 60-80m.
lSupport video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
lAudio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
lLED indication: when power is supplied or device is working, LED related with will go bright.
lSupport up to15metres AWG26 cable length between extender and source & sink device
lNo loss of quality
lInstalls in minutes
lNeed DC5V/2A power supply
The accessories with the device lists as picture：
1、5V Power Adaptor
2、one pc of Manual
Power Adaptor
Physical Connection Showing Picture：
Figure 1.0Front Panel Showing Picture
HDMI IN: Signal Source Input.
HDMI OUT:Receiver to connect the HDTV or other display.
Figure1.1the rear and side board showing picture
To use single cat6 to connect the sender and receiver(with RJ 45 port)
DC 5V:5V DC-DC Power Adaptor Interface.
Operating and Connecting：
- Connect one HDMI 1.3 cable up to 15 meters between source device and TX Extender
- Connect one HDMI 1.3 cable up to 15 meters between sink device and RX Extender
- Connect one cat-6 cables up to 50 meters between TX and RX Extender
- Connect 5V power supply to theYT-TXRX60M-CAT6Extender
SPECIFICATIONS: YT-TXRX60M-CAT6
Length of CAT-6 cable between Rx and TX…..…3D Up to 50 meters/2D Up to 60 meters
HDMI Input…..…………………...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input..………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output…..…………….…...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output...……. DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth……………………………………………………………………………165MHz
Max baud rate……………….…….………………….………….………………………4.95Gbps
InputVideosignal ………….…………………………..…………………….… 0.5~1.5Volts p-p
Output DDC signal ……………………………………………………………… 5Volts p-p (TT1L)
Input/Output HDMI1.3 cable distance………….…...≤15m AWG26 HDMI 1.3 standard cable
Max working current………………………………………………………………………...800mA
Power adapter format………...………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature range……..…………….………………………………… (-15 to +55℃)
Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)
Dimension (L x W x H) ……………………………….……………………99*73*27(mm)(RX/TX)
Weight…..………………………………………………………..…………………0.43kg/pcs *2
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
Serial NO | Trouble Description | Cause and Ways to deal with |
1 | Non-Power-Connencted | 1、Check if the power adaptor head is truly and correctly inserted the power socket. 2、Check the power switch if it is in on status. |
2 | No Picture | 1、Pls to make sure that the TV is on and has been connected with the machine,. 2、To check if the signal source is on and well connected. 3、Check the system connection quality. 4、Check if the line is all good quality. 5、Check the cable quality( to see if the cable is compliant with the HDMI V 1.3.. |
3 | Obscure Picture | 1、To try again to connect the cable to be free from the unsuccessful connection. 2、HDMI Cable Quality(HDMI Cable is compliant with the HDMI V1.3) |
