结构四大特点

1.单向轴承（德国制造）
  嵌有超硬合金，并配合滚柱轴承，具耐磨性、安全性、精度高、寿命长。
  齿轮经过热处理HRC600再精密研磨、传动精度高。
2.滚轮
  采用中空式、重量轻、回转惯性小，可即时停止，确保送料精度。经热处理HRC600镀硬铬再研磨，硬度高、耐磨性优、寿命长。
3.碟式刹车（一般刹车装置）
  采用高级离合器来令片两面完全接触，寿命长、稳定性佳、精度高。
4.逆向装置
   (1) 构造和单向装置一样，能相当精确地控制下轮，长时间使用亦不会使下轮有丝毫的倒退现象，稳定性和精度相当高。
   (2) 不会因为冲压时所溅出的残油，而使刹车失灵产生下轮倒转，送距不准现象。
   (3) 不易产生高热。
   (4) 附有超硬合金和滚柱，不易磨损。
   (5) 动作方式为滚柱作圆周运动，不会有咬死现象。
   (6) 磨擦力小，所需转动扭力相对减小，转动机构较不易损坏。
   (7) 逆向装置的配备时速度可达30米/分，一般为20米/分，提高50%的效率。
   (8) 特殊结构，增加了使用寿命。

Structurer Features

1.      Single-Direction Bearing (made in Germany)

Lnlayed cemented carbide alloy which coordinates with roller bearing,featuring good abrasive resistance,safety,high accuracy,and long service time.Gesrs are processed through heating treatment Hrc600 and then through high accurate grinding.hence high driving accuracy.

Grinding.hence high driving accuracy.

2.      Roller Processed through heating treatment HRC600 and then through grinding ;hollow structure,light in weight, weak gyration inertia,casual structure,light in weight,weak gyration inertia,casual stop,and with high feeding accuracy;featuring high hardness,good adrasive resistance and long service span

3.      Disk type brake(common brake device)

Adopted high-quality clutch disk lining whose two faces interconnected completely,featuring long service span,good stability,and high accuracy.

4.      Reversing Device:

(1)    The structure is the same as that of single-way device.lt controls the lower gear with high accuracy and can maintain the lower wheel a long-tinme stability and high accuracy..

(2)    The problem of the overurning of the lower wheel causde by sprayed oil when prdessde is avoided.

(3)    Not apt to cause high heat.

(4)    With cemented carbide alloy and roller bearing,free of abrasion.

(5)    That the roller bearing works in a circular motion way can avoid bearing seizure.

(6)    Lt has weak frictional force and needs low torque fore.lts rotating drive is not apt to be damaged..

(7)    The reversal device’s speed can reach to 30m/min,increasing50%compared with common speed of 20m/min.

(8)    Special structure is adopted to extend its service span.

滚轮送料机优点

1、持续性：可多工程连续加工 

2、高速性：每分钟可达600次  

3、泛用性：无论材料之宽度与厚度，只需调整送料机去配合模具即可使用。

4、构造简单经济实用 

5、故障率低，保养容易

Advantage of roller feeder:

1.      Durative:many project continuous processing is available.

2.      High Speed:can reach 600 times per minute.

3.      Fargoing using:for different width and thickness material,only need toadjust feeder to match mold.

4.      Compact structurer,economical using.

5.      Low malfunction,easy maintenance.

送料精度

依回转数及送料长度而有所不同，一般其精度在0.03m,若是道梢作定位时，更可得0.01mm的精度。

Format:

Single style:suitable for coil(thickness is sbove 0.15mm),single manu facturing product or continuous pressing pressing products.

形式

单式：适用于卷料（厚度0.15mm以上），单制品或连续冲制品时用之。

复式：适用于卷料（厚度0.15mm以下），短尺材料、单制品连续冲制品时用之。

Format:

Single style:suitable for coil(thickness isabove 0.15mm ),single manufacturing product or continuous pressing products .

Double style:syutable for coli (thickness isunder 0.15mm ),short inch material,single..

Manufacturing product continuous pressing..

规格表