电流热敏电阻是为了对电容器、电热器、马达的负荷施加电压时所产生的冲击电流把它抑制在所希望的值，以便延长电源回路的寿命以及提高信赖性而使用。
Specifications(Disk type)
| Part NO. | R25*1
(Ω) | Maximum
rating
current
at 25℃
(A) | Residual*2
resistance
(Ω) | Dissipation
factor
(mw/℃) | Thermal*3
time
constant
(S) | Rating
temp
(℃) |
| 5D2-05 | 5 | 2.0 | 0.436 | 14 | 15 | -40~200 |
| 8D2-05 | 8 | 1.3 | 0.693 | 14 | 16 | -40~200 |
| 10D2-05 | 10 | 1.2 | 0.864 | 14 | 19 | -40~200 |
| 12D2-05 | 12 | 1.4 | 0.614 | 14 | 16 | -40~200 |
| 16D2-05 | 16 | 1.0 | 0.821 | 14 | 18 | -40~200 |
| 3D2-07 | 3 | 2.4 | 0.264 | 17 | 21 | -40~200 |
| 5D2-07 | 5 | 3.0 | 0.251 | 17 | 21 | -40~200 |
| 8D2-07 | 8 | 2.0 | 0.401 | 17 | 25 | -40~200 |
| 10D2-07 | 10 | 2.0 | 0.504 | 17 | 27 | -40~200 |
| 12D2-07 | 12 | 1.7 | 0.557 | 17 | 25 | -40~200 |
| 16D2-07 | 16 | 1.5 | 0.804 | 17 | 27 | -40~200 |
| 22D2-07 | 22 | 1.0 | 1.105 | 17 | 30 | -40~200 |
| 2D2-10 | 2 | 5.0 | 0.076 | 18 | 30 | -40~200 |
| 3D2-10 | 3 | 4.0 | 0.114 | 18 | 32 | -40~200 |
| 5D2-10 | 5 | 4.0 | 0.191 | 18 | 32 | -40~200 |
| 8D2-10 | 8 | 3.0 | 0.305 | 18 | 42 | -40~200 |
| 10D2-10 | 10 | 3.0 | 0.381 | 18 | 45 | -40~200 |
| 12D2-10 | 12 | 2.0 | 0.557 | 18 | 32 | -40~200 |
| 16D2-10 | 16 | 2.0 | 0.671 | 18 | 45 | -40~200 |
| 2D2-14 | 2 | 5.0 | 0.074 | 18 | 54 | -40~200 |
| 3D2-14 | 3 | 5.0 | 0.114 | 18 | 48 | -40~200 |
| 4D2-14 | 4 | 5.0 | 0.152 | 18 | 57 | -40~200 |
| 5D2-14 | 5 | 5.0 | 0.191 | 19 | 66 | -40~200 |
| 8D2-14 | 8 | 4.0 | 0.336 | 19 | 48 | -40~200 |
| 10D2-14 | 10 | 4.0 | 0.421 | 19 | 57 | -40~200 |
| 12D2-14 | 12 | 4.0 | 0.507 | 19 | 63 | -40~200 |
| 16D2-14 | 16 | 3.0 | 0.671 | 19 | 69 | -40~200 |
*1 R25:Rated zero-power resistance value at 25℃
*2 Residual resistance is the maximum value when maximum rating current is applied.
*3 Time when thermistor temperature reaches 63.2% of the temperature difference.The value is measured in the air.
其他规格可根据客户要求生产。
