美国3G喷油嘴清洗保护剂加压型 3G PARTⅠ-NO8002
Nozzle cleaning protective agent-Pressure type
产品性能
适合高压喷射引擎系统；彻底清洗喷油嘴的胶质；减少废气排放；改善燃油效率，迅速恢复引擎动力；对氧传感器安全。
使用方法
需使用专用清洗设备
1启动引擎打开油箱，断开油泵，消耗掉油路里的残留汽油。
2确认油泵已断开，使用专业设备接通进油管，调整压力工作至空罐。
3清洗完毕，重新连接油路、油泵，盖上油箱，启动汽车引擎，观察是否有漏油现象。
Product effect 美国3G
Suitable for high pressure jet engine system; Thoroughly clean the nozzle of the colloid; Reduce greenhouse gas emissions; Improve fuel efficiency, rapid recovery engine power; The oxygen sensor is safe.
Using method
Need to use a dedicated cleaning equipment
1 start the engine, open the fuel tank, disconnect the pump, consume the residual gas in oil.
2 confirm the oil pump has been disconnected, using professional equipment connected to the tubing, adjust working pressure to empty cans.
3 After cleaning, reconnect the oil, oil pump, tank cover, start the car engine, observe whether there is a leak phenomenon.
Points for attention
Do not put this product into your mouth, and keep it away from away from children and store flammable!!
