T8041 CO2Duct Probe Sensor

Datasheet

TelaireÒVentostatÒT8041 CO2 Duct Probe Transmitter – Simple Installation!!

The T8041 is a CO2 transmitter designed to be installed in HVAC return air ducts. This product offers simplicity in design and installation. Available with analog 0-10V output only. Includes mounting hardware and installation instructions.

MeasurementRange:
0-2000 PPM factory calibrated

Duct Air Velocity:
0 to 1500 ft/min

Temp Dependence: 0.2% of full scale per ºC

Stability:

<2% of full scale over the life of the sensor (15 years typical)

Accuracy:
±40 PPM+3% of reading @22ºC (72ºF) when compared with a factory certified reference.

Non-linearity:
<1% of full scale @22ºC (72ºF)

Pressure Dependence:
0.13% of reading per mm of mercury

Calibration:
Sensors will be calibrated at zero and span at the factory. Calibration in the field will not be required. Sensors will be shipped with ABC Logic™ turned on.*

Response Time:
3 minutes typical for a 90% step change at low duct speeds.

Sampling Rate:
Every 2 seconds, 25% duty cycle

Warm up time:
< 2minutes (Operational) 10 minutes to achieve maximum accuracy.

Operating Conditions:
Temperature: 0ºC to 50ºC (32ºF to 122ºF)

Humidity:
0 to 95% Relative Humidity, non-condensing

Storage Conditions:
-20ºC to 70ºC (-40ºF to 158ºF)

Output:
Analog 0 to 10 VDC (100 ohm output impedance)

Power Sup Reqmts:
18 to 30 VAC RMS, 50/60 Hz or 18 to 42 VDC, polarity protected.

Power Consumption:
Typical values (1.65 Watts Peak, 0.65 Watts Avg. @ 42 VDC)

*Note: Automatic Background Calibration or ABC Logic™ is a patented self- calibration technique utilized in applications where concentrations will drop to outside ambient conditions (Approximately 400 PPM) at least 3 times in a 14-day period, typically during unoccupied periods. Full accuracy is achieved after two weeks of operation.

Size:

Dimensions:

Probe Length: 4.12”

Probe Diam:
 1.24”

 .

Junction Box Depth:
1.6”

Height:
3” square approximately

Color:
701 Black

Flammability Classification:UL 94V-5