【韩国三星振动耐磨试验机手机外壳振动耐磨试验机原装正品】价格_厂家

韩国三星振动耐磨试验机手机外壳振动耐磨试验机原装正品

1台起批

￥1000.00

163.com

产品属性

图文详情

品牌推荐

品牌/型号

其他/TC - 15

型号

TC - 15

磨擦频率

3000rm

机台尺寸

W180mm x L530mm（mm）

品牌

其他

加工定制

否

测量行程

5mm（mm）mm

测量范围

5mm

温馨提示:此价格为了方便做排名，并非最终价，我们根据机械配置，尺寸大小等因素综合定价，情况不同，价格也不同。请与客服联系再拍。

振動耐磨試驗機　TC-15(SM-1502)

三星指定专用指定專用的手機表面塗層耐磨擦試驗機. 用於測試手機之外殼耐磨性.

三星指定专用指定專用振動耐磨試驗機的詳細說明:
通過將產品放進彩色石子和藥水混合的特殊液體中,進行振動磨擦,測試產品的耐磨擦性能.
型號：Trough vibrator TC-15(SM-1502)

主機：Trough vibratorTC-15(SM-1502)
（內置switch unit E51-0,65 和metering unit D1-4）
配套輔料：
1.綠色磨粒RKK 15P 2.黃色磨粒RKF 10K 3.測試藥水FC120

韩国三星振动耐磨试验机

MODEL : TC - 15 (SM - 1502)

First of all, thank you for buying one of our machines.

We are producing Vibratory Finishing Machines, Vibration applied machines, Precision processing special machines with our accumulated technology and thorough quality systems under our motto that we serve our customers with the best quality products

We would like to introduce, through this manual, how to properly use the machine, to perform its best function in operation that our development and production team have made with their endeavors.

This manual will guide the users to understand the equipment, how to use in the best conditions, how to increase productivity, how to maintain the equipment in the very simple way.

For anything that is not sufficiently described, please feel free to contact our office, then we will supply with further information that we can do.

We hope this equipment will do a good role in your business, Good luck!

From all the members of Jin Poong B.R. Tech.

WARRANTY

1.Warraty period of this equipment is 1 year or 2000 hours whichever comes first. and warranty period of the electrical parts is 6 months.

This is based on the normal operation, operator’s mistake or mishandling of the equipment, excessive operation beyond its capability and failure to maintain on time will release the warranty obligation.

2. In any case that the user has changed the machine parts or corrected without any prior agreement, this warranty will be invalid..

PAINTING DURABILITY TESTER MACHINE MODEL : TC - 15 (SM - 1502)

I. COMPOSITION OF THE EQUIPMENT

1. VIBRATORY TUMBLER

2. SOUND COVER

3. AUTO WATER & COMPOUND SUPPLY SYSTEM

4. CONTROL UNIT

II. SPECIFICATION OF THE EQUIPMENT

1. VIBRATORY TUMBLER

Tub interior dimension: W180mm x L530mm

In-put area dimension: W130mm x L530mm

LINING : Hot pour Polyurethane Casting, Thickness: 15mm

Motor : 220V x 1Hp x 3ph x 60Hz. (2 pole)

Motor R.P.M : 3500

2. SOUND COVER

L920mm x W620mm x H900mm+120mm

Top door with Gas Cylinder

3. AUTO WATER & COMPOUND SUPPLY SYSTEM

Water tank, metered to be 500ml

Water tank, metered to be 1000ml + addition of Compound 200ml

Water tank, metered to be 500ml + addition of Compound 20ml

Compound metering pump 300ml/min, adjusted to supply 200 ml by a timer.

Compound metering pump 20ml/min, adjusted to supply 20 ml by a timer.

III. UTILITY REQUIREMENT

1 Electrical Power: 220V x 1Ph (20A).

2 Tap water: 4L/Hr. (To be linked to the right side of the control unit by 8mm hose.)

IV. INSTALLATION

Just place on the flat concrete floor without any anchoring.

In case the equipment is not horizontally leveled, the mass in the tumbler can move to a side,

please be careful.

Please link 3 wires from the motor to the U.V.W. terminal in the control box.

Please link 2 wires from the main source of electrical power to the R.T. terminal in the box.

Please link tap water to the supply valve on the right side of the control box by 8mm hose.

In case Tap water contains some foreign substance, please install pre-filter before this hose.

Please link a hose(20mm) from the hose nipple on left side of the control box to the main machine.

A little longer hose is shipped with machine, please cut it off and adjust depending on

the site allocation

Please link the discharge valve on the rear side of machine to the laboratory discharge pipe line.

Please leave the discharge valve always open except for the maintenance.

A compound container needs to be placed in the room under the control box.

Please remove the top lid and place the container in the room and put a separate lid pre-drilled

on 3 places, 1 big hole in the center and 2 small holes on the right and left.

On the center hole, please place a level sensor which emit alarm when there is not enough

compound in the container,

and on the right and left holes insert 2 hoses that come from the metering pumps.

V. OPERATION

Supply the control box with power (put the Breaker switch ON, put the disconnect switch ON) and

put the selector switch ON, then you will have light on the Power lamp.

Fill the vibratory tumbler with media 15L (11.25L of Cone and 3.75L of Pyramid).

Put the Mode to Manu and push on Start.

If the mass turns from front to back, the motor direction is correct.

In case it turns in the opposite direction please correct by changing the wire.

1. PREPARATION COURSE

The media contains some flashes and burrs. This course is, prior to the main course of testing,

to condition the media by tumbling to the right purpose of the testing.

First of all, put MODE to Manu and push on PRE WATER-1, then 500ml tank will be filled with water.

Pls push on only once, if you push on twice it will be stopped.

Once it is full, it will be automatically disconnected. When the water is evacuated, the tank

is automatically refilled, therefore from next time, there is no need to put to Manu and fill again.

Set the timer 4 hours or 10 hours as required by your company (currently designated to be 10 hours).

Put Mode to PRE and push on Start then the tumbler will start to run and 2000 ml of water

will be supplied automatically.(4 times of 500ml)

东莞东洋机械有限公司专业生产：

万能材料试验机、耐磨试验机、落球冲击试验机、插拔力试验机、扭力试验机、笔记本转轴寿命试验机、LCD前后摇摆试验机、按键寿命试验机、手机翻盖滑盖试验机、触摸屏点击划线试验机、手机软压试验机、手机跌落、破裂强度、纸箱抗压试验机、破裂强度试验机、单/双臂跌落试验机、线材摇摆机（180度、360度、540度、720度等）、电线耐磨试验机、曲折.突拉试验机、滚筒跌落试验机、线材伸长率、听筒线伸缩疲劳试验机、摆锤冲击、杜邦冲击、水平垂直燃烧试验机、针焰试验机、灼热丝试验机等。

冷热冲击试验箱、可程序恒温恒湿箱、精密烤箱、老化箱、盐雾试验箱、高低温试验箱、标准光源箱、QUV老化试验箱、防水试验箱、砂尘试验箱、氙灯耐气候试验箱、换气式老化箱、高温老化箱、蒸汽老化箱、低温冷挠试验箱等。

电子通用测试仪器、投影仪、2.5次元、三次元、显微镜等。

承接各种不规格非标试验设备及仪器等。

公司简介

东莞市东洋(中国)机械有限公司创建于 2003 年，隶属于台湾东洋集团的下属控投子公司，是一家集研发、设计、生产为一体的高新技术企业，公司拥有雄厚的技术实力，以卓越的设计能力，完备的工艺控制和完善可靠的检测手段，向用户提供高性价比的检测设备。主要产品有：拉力机，拉力试验机,材料试验机,恒温恒湿试验机,恒温恒湿试验箱等 200 多种检测试验设备。产品精致美观、稳定可靠，赢得了广大用户的赞誉，已广泛应用于电子电脑，家用电器，工厂企业实验室以及其它电气制造企业，纸品，家私，玩具，五金等行业，为用户的品质管理起着重要的作用。
本厂具有多年的生产经验、硬件、软件开发能力及机械设计研发能力，拥有一支强大技术研发人才队伍，具有丰富的经验、过硬的技术、开阔的思路和创新的能力。产品符合 GB 、 ISO 、 BS 、 ASTM 、 DIN 、 UL 、 EN 、 CSA 、 JIS 、 ISTA 等测试标准。

banner1