免维护节能泛光灯 FAT-W泛光无极灯(120W 150W 200W)
产品详细资料
公司专业生产：LED防爆灯具、LED防爆路灯、LED隧道灯、LED油站灯、LED工矿灯、防爆道路灯、道路灯、LED防爆应急照明灯、LED防爆工作灯、无极灯、工业灯、长寿高顶灯、防爆探照灯、防爆手电筒、防爆投光灯、防爆泛光灯、防爆无极灯、防爆节能灯、隔爆型防爆灯、防爆荧光灯、LED防爆荧光灯、防爆电器、防爆照明配电箱
【技术参数】
额定电压 | 220VAC 50Hz |
额定功率 | 40W 80W 100W 120W 150W 200W |
光源类型 | 无极灯（电磁感应灯） |
防护等级 | IP65 |
防腐等级 | WF2 |
外形尺寸 | L324×W224×H220mm（40W） L450×W250×H435mm（80W 100W 120W） |
总重量 | 12Kg |
【产品特性】
a.本灯具为防水、防尘、防腐型工厂用照明设备
b.灯具外壳由抗拉强度高且含铜量低（小于0.4%），具有良好耐腐性能的铝合金铸造，且外壳表面聚酯喷涂。
c.灯具为两腔整体式结构，光源腔与电器腔独立分开。可调式金属支架可作俯30°仰60°投射角度调节。
d.灯具采用平面钢化玻璃透光板，抗冲击性强，透光率高，耐热剧变性好。
e.灯具为电缆或防爆扰性管进线，安全可靠。防爆结合面均设有橡胶密封圈使灯具同时具有较好的防水性能。
f.本灯具适用电磁感应灯光源。光源具有超长使用寿命，节能，发光效率高，光线柔和等优点。
g.本灯具适用于支架式安装。
警告：
1、严禁带电打开灯具。
2、安装灯具时务必将灯外壳接地，并使其牢固。
【适用范围】
a.厂房、廊道、栈桥变电站、车站、港口、轮船、货场、工业建筑、城市广场等场所的大面积照明。
【电磁感应灯特性】
a.电磁感应灯无电极和灯丝，具有超长寿命，长年使用免维护，寿命是白炽灯的70多倍，金属卤化物灯5-6倍。高效节能，发光效率约80lm/w，功率因数高达0.99，比白炽灯节电80%。稳定性好，在电压波动180-250V范围内仍可正常启动稳定工作。绿色环保，通过国家EMC检验，无电磁污染，无频闪，眼睛不易疲劳。瞬时启动，启动和再启动时无须延时，可瞬时点亮。光源显色性好，显色指数≥80。
【结构特性】
a.精心的配光设计，适合于较远距离的照明。
b. 99.99%高纯铝反射器，反射效率高。
c.光源采用高光效，长寿命的无极灯光源。
d.钢化平板玻璃，耐热、抗冲击。
e.外壳铝合金压铸成型，强度高；表面高压静电粉末喷涂，耐腐蚀。
f.光源腔采用快速开启式，便于安装和维修，并与电气箱有热隔离。
g.翅片式散热设计，提高光源寿命。
h.采用角度调节盘可适合不同角度的照明。
【品质保证】
a.本产品严格按照IS09001:2000国际质量管理体系标准进行质量控制，确保产品质量高于国家标准完全达到设计要求，自购买5年内，产品正常使用下出现任何故障(非人为故障)由本公司免费维护。
注：产品图片、价格属性仅供参考，以公司实际产品为准！详细资料请来电咨询！
Product details
Company specializing in the production of: LED LED explosion-proof lamp, explosion-proof lamps, LED tunnel lamp, LED lamp oil station, LED mining lamp, explosion-proof lamp, road lamp, emergency lamp, LED LED explosion proof, explosion-proof lamp, electrodeless lamp, lamp, ceiling lamp, long service life and high industrial explosion-proof searchlight, explosion-proof, explosion-proof lamp, flashlight explosion-proof lamp, explosion-proof electrodeless lamp, explosion-proof lamps, flameproof explosion-proof lamp, explosion-proof fluorescent lamp, LED fluorescent lamp, explosion-proof explosion-proof electrical equipment, explosion-proof lighting distribution box
[parameters]
Rated voltage of 220VAC 50Hz
Rated power 40W 80W 100W 120W 150W 200W
The light source type electrodeless lamp (electromagnetic induction lamp)
Protection class IP65
The anti-corrosion class WF2
Dimensions of L324 × W224 × H220mm (40W)
L450 * W250 * H435mm (80W 100W 120W)
The total weight of 12Kg
[product]
The A. lamp is waterproof and dustproof, lighting equipment factory
B. lamp shell made of high tensile strength and low copper content (less than 0.4%), with good corrosion resistance performance of the aluminum alloy casting, and the shell surface of polyester coating.
C. lamp for two cavity integral structure, the light source cavity and the electrical apparatus cavity separated. Adjustable metal bracket can be bent 30 degrees upward 60 ° projection angle adjustment.
D. lamp adopts flat tempered glass transparent board, strong impact resistance, high transmittance, good heat-resistant series degeneration.
E. lamp for incoming cables or explosion-proof disturbance tube, safe and reliable. Combined surface are provided with a rubber sealing ring that explosion-proof lamp also has excellent waterproof performance.
The application of F. electromagnetic induction lamp light source lamp. Light source with long service life, energy saving, high luminous efficiency, soft light etc..
G. This product is suitable for scaffolding installation.
Warning:
1, strictly charged open lamp.
2, be sure to install lighting lamp shell grounding, and the firm.
[range]
Large area lighting places A. factory, corridor, Zhanqiao substation, station, port, shipping, freight yard, industrial building, city square, etc..
[Characteristics] electromagnetic induction lamp
A. electromagnetic induction lamp without electrodes and filaments, has a long life, long-term use of maintenance free, incandescent lamp life is 70 times 5-6 times, metal halide lamp. High efficiency and energy saving, the luminous efficiency of about 80lm/w, power factor up to 0.99, 80% than incandescent lamp power. Good stability, voltage fluctuations in the range of 180-250V can start work. Green environmental protection, through the national EMC test, no electromagnetic pollution, no stroboscopic, eye fatigue is not easy. Instant start, start and restart without delay, can be instantaneous light. The light source color is good, color rendering index≥80.
[Characteristics]
Design of optical A. careful coordination, suitable for long distance lighting.
B. 99.99% high purity aluminum reflector, reflecting high efficiency.
C. light source with high luminous efficiency, long life of the electrodeless lamp light source.
D. tempered glass, heat resistance, impact resistance.
E. shell of casting aluminum alloy, high strength; the surface of high voltage electrostatic powder coating, corrosion resistance.
F. light source cavity using a fast open, convenient installation and repair, and thermal insulation and electrical box.
The design of finned heat g., enhance the life of the light source.
The adjusting disc can be suitable for different angle the angle H. lighting.
[quality]
A. This product is in strict accordance with the IS09001:2000 international quality management system standards for quality control, ensure product quality is higher than the national standard, fully meet the design requirements, since the purchase within 5 years, any fault occurs under normal operation (non-human fault) maintenance free by the company.
Note: product pictures, property prices are for reference only, the actual product shall prevail! For details please contact us!
