| | WIZ810MJ | WIZ811MJ | WIZ812MJ |
| Architecture | TCP/IP | W5100 |
| PHY | Embedded in W5100 |
| Mag Jack | RDA-125BAG1A |
| Interface | 10/100 Base-T Ethernet (Auto Detection) |
| Network | Protocol | TCP, UDP, IP, ARP, ICMP, IGMP, PPPoE, MAC |
| Dimension(mm) | 52 x 25 x 21
(W x H x D) | 55.5 x 25 x 23.5
(W x H x D) | 55.5 x 25 x 23.5
(W x H x D) |
Connector Type |
2mm pitch
14 x 2 header |
2.54mm pitch
10 x 2 header |
2.54mm pitch
10 x 2 header
J2:9 GND
->RX_LED
J2:10 GND
->TX_LED
J2:19 GND
->LINK_LED |
| PCB Through Hole | X | Two PCB Throughhole
(ø3.00mm) | Four PCB Throughhole
(ø3.00mm) |
| SPI Signal Pin | Shared for SPI
and BUS signals | Separated for
SPI signals
(SPI_EN controlled by /SCS signal) | Separated for
SPI signals
(SPI_EN controlled by /SCS signal) |
| LINK LED | When the link is established,
LED is on and flashes
at the TX or RX | When the link is established,
LED is on,
but not flashes
at the TX or RX |
| Input Voltage | 3.3V internal operation and 5V tolerant I/Os |
| Power Consumtion | 10/100 baseT max. 185mA (3.3V) |
特征
