◇   产品特性（Features）

• 采用单颗大功率LED 100W作为光源。运用独特的多颗芯片集成式单模组光源设计，选用进口高亮度半导体晶片。

The use of single fiftieth-brightness high-power LED as light source, the use of multiple integrated single-chip design, selection of imported high brightness semiconductor chips.

• 首创散热器与灯壳一体化设计，LED直接与外壳紧密相接，通过外壳散热翼与空气对流散热，充分保证了LED路灯50000小时的使用寿命。按照每天工作12个小时计算，其寿命也在10年以上，维护费用极低；

Pioneered the integration of the radiator shell and lamp design, LED closely connected directly with the shell, shell heat sink through convection cooling and air wing, and fully guarantee the LED street lamp life of 50,000 hours. In accordance with the work of 12 hours per day basis, its life expectancy is more than 10 years, very low maintenance costs

• 灯壳采用铝合金压铸成型，可以有效的散热和防水、防尘。灯具表面进行了耐紫外线抗腐蚀处理，整体灯具达到P65标准；

Lamp die-casting molding aluminum alloy shell used to be effective in cooling and water-proof, dust-proof. Lighting the surface of the ultraviolet-resistant andcorrosion-resistant treatment, the overall lamp could reach P65 standards

• 采用单体椭圆反射腔配合球状弧面来设计，针对性地将LED发出的光控制在需要的范围内，提高了灯具出光效果的均匀性和光能的利用率，更能凸显LED路灯节能优点。与传统的纳灯相比，可节电70%以上；

The use of monomer ellipse reflector with spherical cavity Globoidal designed specifically to control the LED light in the framework of the need to improve the effectiveness of the lamp light uniformity and utilization of solar energy, but also highlight the energy-saving LED street lamps advantages. Satisfied with the traditional lamp, compared to save more than 70% of power;

• 无不良眩光、无频闪。消除了普通路灯不良眩光引起的刺眼、视觉疲劳与视线干扰，提高对驾驶的安全性；No adverse glare, no strobe. Eliminate the glare caused by the adverse ordinary street of glare, visual fatigue and line of sight interference, improve driving safety;
• 启动无延时，通电即大正常亮度，无需等待，消除了传统路灯长时间的启动过程；

To start without delay, power can reach the normal brightness, without waiting for, eliminate the long time start of the traditional street.

• 绿色环保无污染：不含铅、汞等污染元素，对环境没有任何污染；

Green pollution-free: no lead, mercury and other pollution elements, there is no pollution to the environment;

• 与太阳能结合是绝好搭档，充分发辉了LED直流低压工作于节能环保的优点，太阳能光伏板与LED光源结合，为客户实现最佳性优质比高可靠性。

With the combination of solar energy is an excellent partner, full-fat low-voltage DC-hui of the LED in the work of the advantages of energy saving and environmental protection, solar photovoltaic panels and LED light combination for customers to achieve the best quality of high reliability

◇ 应用场所（Application fields）

主要用于户外泛光照明，建筑装饰照明，工业场所照明，体育中心及室外体育场，港口码头等，有路灯配光系统，可作为道路照明。

Applications: outdoor flood lighting, architecture decorated lighting,industrial lighting,physical training centre and outdoor stadium lighting, port, dock ect. Having light distribution system, can be used in street lighting.

◇   技术参数(Product parameters table)

◇   灯具配光曲线图（Luminous intensity distribution diagram）

◇   产品安装示意图（Product installation diagram）

1. 通过产品安装支架上的安装孔位可直接用螺丝固定与安装杆或者安装面上。
2. 固定好产品上之后，可以将螺丝1a，1b调松，然后转换支架的角度，也就是相当于调节灯具安装角度。
3. 工作环境温度，贮存。
4. 安装灯具时，接线与接线处封闭好，防止漏电。
5. 外接电源线时，必须采取相应的防水，漏水的措施。
6. 该灯具使用不能违反任何防火法规。
7. 安装请找专业电工。

◇   产品包装图（Product packing）