USER
MANUAL
PW-THF104
HDMI Fiber Optic Transmission
1.0 Introduction
2.0 Panel Description
3.0 Function Specification
4.0 Connection and operation
1.0
Introduction
PW-THF104 is a perfect solution for transmitting HDMI audio and video through the fiber, the set of device includes a sender of PW-THF104T and a receiver of PW-THF104R.
Our products transmit the HD video over optical fiber, which making the images clearer as well as the transmission more stable.
At the same time, the product has the built-in IR remote control function.
2.0
Panel Description
2.1
Front Panel
| HDMI TX | HDMI RX |
HDMI PORT | Video Input | Video Output |
IR PORT | IR Input | IR Output |
Fiber Port SC | Optic-fiber Data Transmission | |
RESET KEY | Hold down the key for 8 seconds after power on, the model will restore default settings | |
2.2
Indicator led.
Indicator led | Status | |
FX | Light On | The transmission rate is correct |
Light Off | The transmission rate is not correct | |
Link act | Light On | Fiber Link up |
Flash | Packets of data are transmitting in the indicating port | |
Dpx | Light On | In the State of full-duplex |
Light Off | In the State of half-duplex | |
3.0
Function Specification
>HDMI 1.3/HDCP1.1 & 1.2
>Both Optic-fiber transmission and Ethernet Transmission
>Support point-to-point mode, one point-to-many mode and cascaded transmission mode.
>built-in IR remote control function, you can control the set-top box at the receiving site using the IR remote control.
>Pure hardware design, just plug and play, no need to install extra software.
Video Parameter |
|
Video Resolution | 640X480 @ 60fps |
1024X600 @ 60fps | |
1152X864 @ 60fps | |
1280X720@ 60fps | |
1280X800@ 60fps | |
1280X1024@ 60fps | |
1440x900 @ 60fps | |
1660x1200 @ 60fps | |
1920x1080 @ 60fps | |
Audio | 32kHz, 44.1kHz and 48kHz |
Infrared Support | 38KHz; NEC code |
HDMI Version | HDMI 1.3 |
HDCP Version | HDCP 1.2 |
Other Parameters |
|
Power input | AC input: 100V - 240V (50 - 60Hz) |
Max Power Consumption | THF104: 5W |
THF104: 5W | |
Size (L-W-H) | 182×100×37 mm |
Net Weight | 460g*2pcs |
Operating Temperature/Humidity | 0℃ |
Storage Temperature/Humidity | -10℃ |
Fiber Parameter
1. Please connect the HDMI signal source to the PW-THF104T。
2. Connect PW-THF104Rto the HD displayer.
3. Between PW-THF104Tand PW-THF104 R(SC port-to-SC port) use optical fiber to connect.
4. IR remote control function, connect the IR receiver to the HDMI TX and connect the IR transmitter to the HDMI RX.
5. Power on the device, POWER light on, then it will do the self-checking job with the other indictors blinking automatically.
When the Link light flash, the device starts up.
Application diagram
