1、该合金具有良好的冷、热成形性能，钢锭锻造加热温度1120℃。 2、该合金的晶粒度平均尺寸与锻件的变形程度、终锻温度密切相关。 3、合金的焊接性能良好，可在保护气氛下用钨极或本合金作添料进行氩弧焊接，也可用钎焊连接及电阻缝焊。 4、表面处理工艺：除去合金表面氧化皮时先碱洗，再在销酸、氢氟酸-水溶液中酸洗。 5、合金冷加工时当加工量大于15%时，热加工后要进行退火处理。 镍基合金 | RA330® | 5592 5716 | N08330 1.4886 | 19 | 35 | | 1.25 | 43 | 0.05 C, 1.5 Mn | The workhorse of austenitic heat resistant alloys. Good strength, carburization and oxidation resistance up to 2100°F. | | RA333® | 5593 5717 | N06333 2.4608 | 25 | 45 | 3.0 | 1.0 | 18 | 3.0 Co, 0.05 C, 3.0 W | A nickel base superalloy with excellent carburization, oxidation, and hot corrosion resistance. It has high creep rupture strength with exceptional ability to withstand repeated thermal shock. | | RA 602 CA® | - | N06025 2.4633 | 25 | 63 | - | - | 9.5 | 0.18 C, 2.2 Al, 0.1 Y, 0.08 Zr | One of the most oxidation resistant high strength, heat resistant nickel alloys available. Useful through 2200°F. | | inconel600 | - | N06600 2.4816 | 15.5 | 76 | - | 0.2 | 8.0 | 0.2 Al, 0.2 Ti | A nickel-chromium alloy with good carburization and oxidation resistance through 2000°F. | | 601 | 5870 5715 | N06601 2.4851 | 22.5 | 61.5 | - | 0.2 | 14 | 1.4 Al, 0.3 Mn, 0.05 C | A nickel base alloy with high chromium and an aluminum addition. Outstanding oxidation resistance to 2200°F, good strength and carburization resistance. | | 800H/HT | - | N08811 N08810 1.4959 1.4876 | 21 | 31 | - | 0.4 | 45 | 0.4 AI, 0.6 Ti | High strength austenitic heat resistant alloy for ASME code applications to 1650°F. | | AL-6XN® | - | N08367 | 20.5 | 24 | 6.3 | 0.4 | 48 | 0.3 Mn, 0.22 N, 0.02 C | A high molybdenum superaustenitic with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. Suitable for use in pulp mill bleach plants, seawater heat exchangers and chemical process equipment. | | Alloy 20 | - | N08020 2.4660 | 20 | 33 | 2.2 | 0.4 | 40 | 3.3 Cu, 0.5 Cb, 0.4 Mn, 0.02 C | The alloy designated specifically to withstand sulfuric acid. Practical immunity to chloride stress corrosion cracking. Stabilized to prevent intergranular corrosion as welded. Resistant to polythionic acid SCC. | | inconel625_N06625 | 5599 5666 5837 | N06625 2.4856 | 21.5 | 61 | 9.0 | 0.1 | 5.0 | 3.6 Cb, 0.4 Al, 0.4 Ti | High creep-rupture strength, oxidation resistant to 1800°F (982°C). Excellent resistance to hot seawater, scrubber environments and reducing acids. | | 825 | B 424, B 425, B 423, B 162 | NO8825 | | | | | | | incoloy825现货库存提供incoloy825板材，薄板，棒材，无缝管，焊管和焊材. | | 718 | 5596 5662 5663 5832 | N07718 2.4668 | 19 | 52 | 3.0 | - | 19 | 0.5 Al, 0.9 Ti, 5.0 Cb, 0.002 B | Nickel alloy precipitation hardened by gamma prime and double prime. Readily fabricated, weldable even in the hardened condition. Used for gas turbine components to 1200°F, as well as for cryogenic equipment. | | 718 NACE | - | N07718 2.4668 | 19 | 52 | 3.0 | 0.1 | 19 | 5.0 Cb | Age hardened nickel alloy commonly used in oil and gas applications for its high strength and moderate corrosion resistance. Meets API 6A. | | X | 5536 5754 5798 | N06002 2.4665 | 22 | 47 | 9.0 | - | 18 | 1.7 Co, 0.5 Al, 0.15 Ti, 0.6 W | Good strength, fabricability and excellent oxidation resistance through 2000°F. Widely used for aircraft, marine and industrial gas turbine combustors. | | X-750 | 5542, 5598 | NO7750 | 15.0 | 73.0 | - | 0.2 | 7.0 | 0.7 Al, 2.5 Ti, 0.9 Cb, 0.04 C | Alloy X-750 is a nickel chromium alloy similar to Alloy 600 but made precipitation hardenable by additions of aluminum and titanium | | 904L | | N08904 | 21 | 25 | 4.5 | 0.5 | 45 | 1.7 Mn, 1.6 Cu | 904L is an austenitic alloy designed for a middle to high level of corrosion resistance above the levels of 316 and 317 stainless. | | 400 | B 127, B 163, B 164, B 165 | N04400 | - | 66 | - | 0.2 | 1.5 | 1.0 Mn, 31 Cu, 0.1 C | Alloy 400 is a ductile nickel-copper alloy with resistance to a wide range of corrosive environments. | | K-500 | B 865 | N05500 | - | 66 | - | - | 1.5 | 28 Cu, 2.7 Al, 0.6 Ti, 0.1 C, 1.0 Mn | Alloy K-500 is a nickel-copper alloy, which combines the excellent corrosion resistance of alloy 400 with the added advantages of greater strength and hardness. | | W | 5786 | N10004 | 5.0 | 65 | 24 | - | 5.5 | 0.3 V | Alloy W is a solid solution strengthened nickel superalloy developed primarily as a filler metal for welding dissimilar alloys, AWS ERNiMo-3 | | C-263 | 5966 | N07263 | 20 | 51 | 5.8 | - | - | 20 Co, 2.2 Ti, 0.4 Ti, 0.02 Zr, 0.001 B | Alloy C263 is an aluminum-titanium age hardening nickel base superalloy welding wire. |
|
