'
1. 产品特点Product feature:
内建10组程序内存; Capable of storing 10 memories of testing conditions
缓升及测试时间可达999.9秒; Electronic ramp up and dwell time for up to 999.9 seconds
键盘锁定功能; Front panel lockout
内建PLC Remote可程序遥控界面; Built-in PLC Remote interface
前面板软件输入校正; Front panel software calibration
2. 产品选型Model selection:
H8130 交流耐压测试仪(AC Withstand Voltage tester)
H8140 交直流耐压测试仪(AC/DC Withstand Voltage tester)
HI8132 交流耐压/绝缘测试仪(AC Withstand Voltage/Insulation tester)
HI8142 交直流耐压/绝缘测试仪(AC/DC Withstand Voltage/Insulation tester)
3. 产品规格Product specification:
技术参数Technical parameters |
项目Item | 范围Range | 分辨率Resolution | 精度Accuracy |
交流耐压测试AC withstand voltage test | 额定输出电压Output:5KVAC/12mA |
输出电压Output voltage | 0~5.00KVAC | 0.01 | ±(2%of setting+5V) |
输出频率Output frequency | 50/60Hz可选择±100PPM |
输出波形Output waveform | 正弦波THP<2%波峰因素; Sine wave THP < 2% crest factor |
上限设定Upper limit setting mA | 0.10~12.00mA | 0.01 | ±(2%of setting+2counts) |
下限设定Lower limit setting mA | 0.00~12.00mA | 0.01 | ±(2%of setting+2counts) |
绝缘电阻测试Insulation resistance test | 1000V/1000M(8132 or 8142) |
输出电压设定Output voltage setting | 0.01~1.00KVDC | 0.01 | ±(2%of setting+2V) |
电压显示Voltage display | 0.01~1.00KVDC | 0.01 | ±(2%of setting+1counts) |
高阻显示Resistance display | 1~1000MΩ | 1 | ±(3%of setting+2counts) |
上限设定Upper limited setting | 0.1~1000MΩ | 1MΩ/Step | ±(3%of setting+2counts) at>500VDC |
下限设定Lower limited setting | 1~1000MΩ | 1MΩ/Step | ±(7%of setting+2counts) at>500VDC |
直流耐压测试DC withstand voltage test | 额定输出Output:6KVAC/5mA(8130 or8142) |
输出电压Output voltage | 0~6KVDC | 0.01 | ±(2%of setting+2counts) |
连波Ripple | <5%在6KVDC/5mA电阻负载下量测; < 5% in 6KVDC/5mA resistive load measurement |
上限设定Upper limited setting | 0.02~5.00 | 0.01 | ±(2%of setting+2counts) |
下限设定Lower limited setting | 0.00~5.00 | 0.01 | ±(2%of setting+2counts) |
电压稳压率Voltage regulation rate | ±(1% setting value ±5V) |
缓升时间Sec | 0.1~999.9 | 0.01 | ±(0.1%+0.05sec) |
测试时间Test time Sec | 0.02~999.9(0=continuous | 0.01 | ±(0.1%+0.05sec) |
电压表Voltage meter ( ac/dc ) | 0.00~6.00KV | 0.01 | ±(1.5%of setting+1counts) |
电流表Current meter ( ac/dc )mA | AC:0~12/DC0.02~5.00 | 0.01 | ±(2%of setting+1counts) |
电弧测试Arcing test | 1-9 grade: 0=OFF |
遥控装置Remote control device | 输入input: Test. and Reset 输出output: Pass. Fail. Test-in-Process |
测试失败报警Test fail alarm | 蜂鸣器,液晶显示(FALL)指示灯; Buzzer, liquid crystal display ( FALL ) indicating lamp |
记忆组 A group of memories | 5组记忆; 5 groups |
键盘安全锁定Safety lock | 可选择(锁定)或(不锁定)俩种模式; Can be set LOCK or No LOCK |
液晶显示器Liquid crystal display | 16×2 背光LCD |
校正方式Correction method | 前面板软件校正; Front panel software correction |
输入特性Input characteristics | AC 115/230Vac±10%/47-63Hz/3A (Work environment:0-40℃/0-80%RH) |
尺寸Dimension | H89mm×W280mm×D370mm |
'