ATC1500-QRX适用于电源厂生产线测试，要求变频测试，对输入电压有特殊要求，测试速度快，可迅速转换成测试报表，同时形成品质图表，有效的提高工厂的品质控制能力。 此套系统采用柜式设计，高档实用，能有效地提高客户的品质形象,为客户赢取更多的订单!
系统主要优势:
- 可以测试150W以内任何单组输出电源、充电器、LED驱动电源。
- 统计测试报告（Excel电子档）
- 图形界面基于Windows XP环境
- 自动生成CPK、数据分布图等品质报表
- 测试程序编辑功能
- 配置灵活
- 性价比高，适合大中小企业
- 测试速度快
- 双机同时测试
- 测试不良结果实时打印功能
ATC1500Q系统配置:
- 自动测试控制软件
- ATC150主机四台。（每台主机内置功率测试模块/交流/直流/纹波噪音测试模块/电子负载/AC与DC源/浪涌测试模块)
- 双机测试架
- 1000VA变频电源
- 工业电脑（256MB内存,80GB硬盘,Windows XP系统,键盘,鼠标)
- 17”液晶显示器一台
- 热敏打印机一台
- 19”标准机柜一台
系统测试项目：
- 启动测试(Start-up)
- 欠压测试(UVLO)
- 待机测试(Idle)
- 恒压区测试(Standard CV)
- 恒流区测试(Standard CC)
- LED 电源测试
- 短路测试(Short Circuit)
- 过压测试(Over Voltage)
- 过流测试(Over Current)
- 线调整(Line Regulation)
- 负载调整(Load Regulation)
- 平均效率（Average Efficiency)
- I-V曲线(I-V curve)
- 关机测试(Power Down)
- 支持性测试(Support Function)
自动测试控制软件：
- 友好的用户界面
- 测试程序易编辑
- 测试速度快
- 测试报告与数据管理功能
系统技术参数：
Test Name | Parameters Tested and Range | Accuracy |
START UP | Inrush current: 0 – 83A Startup time: 0 to 65 sec. Output voltage overshoot: 0 – 60V | ±2% (reading + range) ±1ms ±1% (reading + range) |
UVLO | Functional test only, Pass/Fail | N/A |
IDLE | Standby input power: 0 – 100W Standby input current: 0 – 10A Input voltage: 30 – 280V | ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
STANDARD CV (constant current and constant resistance load) | CC Mode: 0 – 15A CR Mode: 0.1 – 50Ohm Input voltage: 30 – 280V Input Current: 0 – 10A Input Power: 0 – 200 W Power Factor 0 – 1.0 Output Voltage 0 – 60V Output Current 0 – 15A Efficiency: 0 – 100% Ripple/Noise 200kHz: 0 – 500mV Ripple/Noise 20MHz: 0 – 500mV | ±0.2% (reading + range) ±0.4% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) ±2% (reading + 5mV) ±2% (reading + 5mV) |
STANDARD CC (constant voltage and constant resistance load) | CV Mode: 0 – 60V CR Mode: 0.1 – 50Ohm Input voltage: 30 – 280V Input Current: 0 – 10A Input Power: 0 – 200 W Power Factor 0 – 1.0 Output Voltage 0 – 60V Output Current 0 – 15A Efficiency: 0 – 100% | ±0.1% (reading + range) ±0.3% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) |
SHORT CIRCUIT | Input voltage: 30 – 280V Input Current: 0 – 10A Input Power: 0 – 200 W Power Factor 0 – 1.0 Output Average Current: 0 – 15A | ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.2% (reading + range)* *For steady current |
OVER CURRENT | Current trip point: 0 – 15A Trip point voltage: 0 – 60V | ±1% (reading + range)+(step size) ±1% (reading + range) |
OVER VOLTAGE | OV trip point: 0 – 60V | ±1% (reading + range) |
LINE REGULATION | Voltage regulation: 0 – 100% | ±0.1% (reading + range) |
LOAD REGULATION | Voltage regulation: 0 – 100% | ±0.1% (reading + range) |
POWER DOWN | Holdup time: 0 – 65 sec. Input voltage: 0 – 280V Output current: 0 – 15A Output voltage overshoot: 0 – 60V | ±1ms ±0.1% (reading + range) ±0.1% (reading + range) ±1% (reading + range) |
Global Setting | Load On Voltage: 0 – 60V Wait Time: 0 – 32767 sec. Nominal Output Voltage: 0-60V Nominal Output Current: 0-15A | ±1% (reading + range) ±1ms ±1% (reading + range)
|
Optional Setting | Bias Output Voltage : 0 – 28V Relay State rated current: 5A | ±1% (reading + range) - |
±1% (reading + range)概述:
- 输入电压：220Vac ±10%
- 变频电源输入电压：220Vac ±10%
- 总体重量：200Kg
- 尺寸：600 x 800 x 1670mm
应用特性：
- 该测试系统精度高，适用于生产线的自动化测试，双机测试，效率高。主要适测单组输出的中小功率的电源适配器、充电器产品的测试。
- 同时配备有使用方便的测试架，该测试架采用左右转换模式测试，大大减少了操作员的等待时间，有效的提高了生产测试效率，同时，该测试架配有人工判断开关，比如外观及LED灯的判断，当发现此类不良时，同样可产生不良记录。
- 系统基于WINDOWS XP使用环境，测试结果可迅速成电子表格，同时自动产生<与CPK值及品质报表，为研发及品质人员提供了快与准的测试数据！
