德国R&S ENV216 两线V型网络

详细PDF格式资料欢迎来电索取！0571-88827676

功能：

z 快速测试电缆布局图及 TDR测试

z 发现及定位最频繁的电缆及连接故障

z 测量电缆长度

z 找到及定位所有可能的电缆及连接故障

z 通过简单的电缆识别器可识别 28 根电缆

z 精确的长度测试

z 预设不同电缆类型及线缆标准

z 对线缆进行寻踪

z 远端单元具有全双工通话功能

技术参数：

长度及反射：

输出 100 欧姆 RJ45 输出口；

输出 50 欧姆 BNC 输出口

双绞线、同轴电缆：

距离范围 分辨率 精度

0.0---99.9 米

100---300 米

0.1 米 U

+U

(3%+5)

U

+U

(5%+5)

幅值范围   

-99%---+199% 1% U

+U

(5%+5)

长度测量校准：范围 2---200 米

速度因数 0.5--0.99

寻踪：

频率：0.8K---1.2KHZ

RJ45 输出幅值：7V

BNC 输出幅值：5V

快速测试(RJ45 输出口) ：

测试电缆长度

测试电缆断路故障距离

短路(线与线、线与屏蔽)故障距离

分裂、交扰、反相、跨接线路的故障

电缆末端

与远端单元同用实现测试(RJ45 输出口) ： 

测试单根电缆的长度

测试电缆断路故障距离

短路(线与线；线与屏蔽)故障距离

分裂、交扰、反相、跨接线路的故障

电缆识别功能#1---#15

定位：

#1----#28

电源：9V普通电池,10 分钟自动断电

工作温度：5---40℃

选件：

S2004 带耳机的远端通话单元 

S2005 标准远端单元(#2---#6)5 个 

S2006 标准远端单元(#7--#15)9 个 

A1083 充电器及充电电池    

A1043 定位装置(#5---#16)12 个 

A1044 定位装置(#17---#28)12 个

A1082 定位器   

A1006 软包

Test & Measurement
Data Sheet | 04.01
R&S®ENV216
Two-Line V-Network
For disturbance voltage
measurements on
single-
phase EUTs
R&S®ENV216
Two-Line V-Network
At a glance
The R&S®ENV216 two-line V-network meets the
requirements
of CISPR 16-1-2, EN 55016-1-2,
VDE 0876 and ANSI C63.4 for V-networks with a
simulated impedance of (50 μH + 5 Ω) || 50 Ω in
the frequency range 9 kHz to 30 MHz. A female
connector with protective earth contacts is provided
for connecting the EUT. Various models with
country-
specific connector systems are available.
Owing to its compact design and low weight, the
R&S®ENV216 is ideal for frequently varying applications
and especially for on-site disturbance voltage measurements
on single-phase EUTs. Note that high leakage
currents are produced because of the standard design
of these V-networks. The networks should therefore be
connected
to a low-impedance protective earth system. In
uncertain
cases, an isolating transformer should be used.
In the case of AC supply operation in a range from
90 V to 240 V and 50 Hz to 60 Hz, the operating voltage
for the built-in logic circuit is obtained from the AC supply
direct. This covers all standard applications.
If the EUT is
operated with low AC voltages or DC voltages up to 50 V,
the logic circuit is powered via an external plug-in power
supply that is supplied as standard.
Key facts
??Frequency range 9 kHz to 30 MHz
??Power-handling capacity up to 16 A, constant current
(country-specific)
??Simulated impedance (50 μH + 5 Ω) || 50 Ω in line with
CISPR
16-1-2 Amd. 2:2006
??V-network in line with CISPR, EN, VDE, ANSI,
FCC Part 15 and MIL-STD-461 D, E and F
??Calibrated in line with CISPR 16-1-2 and ANSI C63.4
2
R&S®ENV216
Two-Line V-Network
Benefits and key
features
Air-core design and artificial hand
The R&S®ENV216 two-line V-network is based on air-core
inductances and contains an artificial hand.
Switch-selectable highpass filter of 150 kHz
To prevent the measuring receiver from being overdriven
by low-frequency spectra of high level, a 150 kHz highpass
filter can be cut in.
Built-in 10 dB attenuator pad
To ensure standard impedance irrespective of the receiver
input attenuation, the R&S®ENV216 is equipped with a
10 dB attenuator pad.
Built-in pulse limiter (can be switched off)
A built-in pulse limiter which can be switched off protects
the receiver input.
Remote control with TTL levels (compatible with
Rohde & Schwarz measuring receivers)
TTL control inputs that can be driven by controllers and
Rohde & Schwarz measuring receivers are provided for
remote
control in automatic test systems (phase selection
and activation of highpass filter). Optocouplers prevent
pick-up of external disturbance.
Rohde & Schwarz R&S®ENV216 Two-Line V-Network 3
Specifications
R&S®ENV216 two-line V-network
Frequency range 9 kHz to 30 MHz
Simulated impedance phase and magnitude (50 μH + 5 Ω) || 50 Ω
Error limits in line with CISPR 16-1-2 ±20 % (magnitude), ±11.5° (phase)
Isolation 1) 9 kHz to 50 kHz
50 kHz to 30 MHz
> 0 dB to 40 dB (increases linearly with
logarithm
of frequency)
> 40 dB
Test path to EUT
AC supply voltage If the EUT is operated with AC voltages up to
90 V and DC voltages up to 50 V, the logic circuit
has to be powered via the external plug-in power
supply that is supplied as standard.
0 V to 240 V AC + 10 %
AC supply frequency 50 Hz to 60 Hz ± 5 %
DC voltage 0 V to 50 V DC
Maximum permissible continuous current country-specific
Model 12 16 A
Model 13 13 A
Model 14 16 A
Model 15 10 A
Model 16 15 A
Test path to measuring receiver
Maximum permissible RF disturbance power
from EUT
1 W
Highpass filter integrated, switch-selectable 150 kHz
Voltage pision factor between EUT and
measuring
receiver port
built-in attenuator pad, calibration data supplied
with V-network
10 dB
Response threshold of built-in pulse limiter can be switched off 140 dB (μV)
Connectors
AC supply input country-specific plug with protective earth contact and
1.8 m cable
AC supply voltage input for EUT country-specific socket with protective earth contact
RF output N female, 50 Ω
Remote control input 25-contact, D-Sub, female
Input for artificial hand 4 mm connector, female, with knurled clamp
Reference ground connection ground bar with three M4 threads
Protective earth connection M6 threaded bolt
Connector for external power supply on rear panel, by supplied plug-in power supply DC hollow connector ∅ 5.5 mm, 2.1 mm,
10 V to 18 V DC, 250 mA
1) Between AC supply and measuring receiver port.
General data
Operating temperature range +5 °C to +45 °C
Storage temperature range −40 °C to +70 °C
Dimensions W × H × D 219 mm × 147 mm × 350 mm
(8.6 in × 5.8 in × 13.8 in)
Weight 5.5 kg (12.1 lb)
Electrical safety observe notes in manual in line with EN 61010
EMC in line with IEC/EN 61326
Emission class B, in line with residential environment
requirements
Immunity in line with industrial environment requirements
Rohde & Schwarz R&S®ENV216 Two-Line V-Network 4
Designation Type Order No.
Base unit
Two-Line V-Network R&S®ENV216 3560.6550.yy
Model for Germany (Schuko connector) yy = 12
Model for United Kingdom yy = 13
Model for France yy = 14
Model for China/Australia yy = 15
Model for USA yy = 16
Accessories supplied
Manual, calibration data, plug-in power supply
Recommended extras
Control Cable, 3 m 1) R&S®EZ-21 1107.2087.03
Control Cable, 10 m 1) R&S®EZ-21 1107.2087.10
150 kHz Highpass 2) R&S®EZ-25 1026.7796.03
1) 25-wire remote-control cable: control by test receivers of series R&S®ESxS, R&S®ESIBx, R&S®ESPIx, R&S®ESCI and R&S®ESUx
(male-to-male, wired 1:1; two required for shielded chambers).
2) Required for high disturbance voltages below 150 kHz, e.g. for disturbance voltage measurement in line with EN 50065, Part 1.
Ordering information
Country-specific connector models
Germany as well as Austria, Finland, the Netherlands, Norway, Russia, Sweden, Korea;
occasionally: Portugal, Spain
UK, Ireland, Hong Kong, Malaysia, Singapore
France, Belgium and Czech Republic
China, Australia, New Zealand
USA, Canada, Japan, Taiwan, Mexico, Central America
Service options
Two-Year Calibration Service R&S®CO2ENV216 Please contact your local
Three-Year Calibration Service R&S®CO3ENV216 Rohde
& Schwarz sales office.
Five-Year Calibration Service R&S®CO5ENV216
One-Year Repair Service following the warranty period R&S®RO2ENV216
Two-Year Repair Service following the warranty period R&S®RO3ENV216
Four-Year Repair Service following the warranty period R&S®RO5ENV216
Rohde & Schwarz R&S®ENV216 Two-Line V-Network 5
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG
Trade names are trademarks of the owners | Printed in Germany (ch)
PD 5214.0299.32 | Version 04.01 | January 2011 | R&S®ENV216
Data without tolerance limits is not binding | Subject to change
© 2003 - 2011 Rohde & Schwarz GmbH & Co. KG | 81671 München, Germany
About Rohde & Schwarz
Rohde & Schwarz is an independent group of companies
specializing in electronics. It is a leading supplier of solutions
in the fields of test and measurement, broadcasting,
radiomonitoring and radiolocation, as well as secure
communications. Established more than 75 years ago,
Rohde
& Schwarz has a global presence and a dedicated
service network in over 70 countries. Company headquarters
are in Munich, Germany.
Environmental commitment
??Energy-efficient products
??Continuous improvement in environmental sustainability
??ISO 14001-certified environmental management system
Rohde & Schwarz GmbH & Co. KG
www.rohde-schwarz.com
Regional contact
??Europe, Africa, Middle East
+49 89 4129 123 45
customersupport@rohde-schwarz.com
??North America
1 888 TEST RSA (1 888 837 87 72)
customer.support@rsa.rohde-schwarz.com
??Latin America
+1 410 910 79 88
customersupport.la@rohde-schwarz.com
??Asia/Pacific
+65 65 13 04 88
customersupport.asia@rohde-schwarz.com
Certified Quality System
ISO 9001
Service you can rely on
J Worldwide
J Local and personalized
J Customized and flexible
J Uncompromising quality
J Long-term dependability
5214029932